-
Posts
837 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Calendar
Store
Everything posted by Ging3rguy
-
Restarting Old Projects, Years Later
Ging3rguy replied to Eridyne's topic in New Member Introductions
I wouldn’t bother changing the thermal paste unless they are cutting out as you could give yourself more problems. -
Restarting Old Projects, Years Later
Ging3rguy replied to Eridyne's topic in New Member Introductions
Do the clock caps providing they are 1.0-1.4. Also check the caps around the heat sinks for domeing as well. -
Restarting Old Projects, Years Later
Ging3rguy replied to Eridyne's topic in New Member Introductions
Hiya, how far did you get last time? You can’t rush a good thing! -
New To This Site and Hard Modding
Ging3rguy replied to mattison1986's topic in New Member Introductions
Hi, what version Xbox do you have, if it is not a 1.6 a tsop is an option? Here is a guide to an Aladdin install and more info here on this thread. https://circuit-board.de/forum/index.php/Attachment/72198-Aladdin-XT-installation-Guide-pdf/ just scroll down to Dave’s reply on this thread https://www.ogxbox.com/forums/index.php?/topic/3754-hdd-upgrade-question/ -
I think he is using the hdd for a windows build not putting windows on a Xbox.
-
How would you be able to do it without a pc or a Xbox that was turned on? Using chimp is pretty straightforward it will not time out when you swap the ide from the dvd drive to slave hdd.
-
If it is an unused xecuter 2.6 you should still have flashbios on one of the banks, you can use that to flash the other.
-
Hi Mikey, welcome, it’s always good to add to the knowledge base.
-
Hello there
-
You can tsop both unless you want to use a chip, which is the dead board, the 1.0 has a 1mb bios and the 1.2 has a 256kb? I like the ind-bios bios as you get the extra igr functions.
-
Use Xboxhdm to check the new drive using eeprom/hdd key and check the c and e partition have been setup correctly or just unlock and try again.
-
That would be great. Thanks
-
Here’s a link to the dash section on cabins mirror https://community.diodematrix.com/viewtopic.php?f=20&t=21
-
Considering Adding an Hdmi Port To Back of Console
Ging3rguy replied to RicoPicoUK's topic in Hardware Mods
I have a pound adapter but it only has issues with 1 of my 1.4 boards, I didn’t try it with separate 5v supply though. I think I just got lucky from the amount of bad posts about them and the companies own you tube post!- 15 replies
-
- considering
- adding
- (and 4 more)
-
If you don’t want to waste dvds just stick them on your hdd and preserve the life of your dvd drive. To load multiple games on a dvd you are going to need a program to load a menu that the disk will then be able to choose the .xbe from the game folder.
-
V1.0 XBox Flashing Red and Orange After Ram Upgrade
Ging3rguy replied to rawlor's topic in Hardware Mods
From the pictures it looks like you didn’t clean the solder off the pads before you soldered the new chips on, this makes it really hard to sit the chips properly. 2nd pic top right looks like a solder bridge between pins 2 and 3 and I haven’t looked that closely at the rest.
Board Life Status
Board startup date: April 23, 2017 12:45:48