-
Posts
157 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Calendar
Store
Everything posted by XC-3730C
-
Chimp is only for softmodded systems. You dont need to lock a hard drive on a TSOP modded Xbox. Just start over with HeXEn to set up your new hard drive.
- 2 replies
-
- 1
-
- black screen
- trying
- (and 5 more)
-
I never use Chimp. I use XboxHDM on my PC to set up a larger HDD/softmod (with an eeprom backup of course), since I have a SATA to USB 3.0 dock. Of course, completing the setup with HeXEn is essential. I got fed up with Chimp, and having to do the hot swap.
-
Wires are also needed if you use the alternate TSOP solder points Sent from my SM-G955U using Tapatalk
-
Here is my favorite IDE to SATA adapter: https://www.amazon.com/dp/B003AG79GO/ref=cm_sw_r_cp_apa_p7LYAbAM4E0RY Boots a SATA drive up quick, and is reliable. Sent from my SM-G955U using Tapatalk
-
I would load the HeXEn disc, and boot it up on your Xbox. From there, you can rebuild your drive, upgrade to a larger drive, and reinstall M$ dash. Since your system is TSOP modded, there is no need to run a softmod installer.
-
I cloned the stock drive on my softmodded Xbox to a 500gb drive that was in my dead TSOP xbox using Chimp and locked it. The drive boots up just fine. I then use HeXEn disc to install Krayzie One Click softmod, and that was successful. I reboot into HeXEn, and I can see the F and G, but F looks empty in the file explorer (it says F has 35mb free, when it should be about 20GB free), and G says there is 0 space free. G doesn't even show up in UnleashX even though F and G are enabled. How can I get the contents of F and G to show up? I really dont want to have to reformat F and G/re-transfer everything if I can avoid it.
-
- converting
- hdd
- (and 4 more)
-
Dangerous, I don't do soft mods any more, but when I did, I used the HeXEn disc, and followed these steps to redo the softmod (after doing the softmod via Splinter Cell disc/special game save) + XBMC as the dash: 1. 2, 2.2, 2.2.7 (Krayzie 1 click softmod) 2. 8, Applications, XBpartitioner 1.3 3. 8, System, Format Menu 4. 4, 4.1 (install XBMC) 5. 5, 5.1, 5.1.2, 5.1.2.3 (XBMC as dash) Sent from my SM-G955U using Tapatalk
- 120 replies
-
- 1
-
Yes Sent from my SM-G955U using Tapatalk
-
Dies Surreal 64 benefit from 128gb RAM while running games at 720p? Sent from my SM-G955U using Tapatalk
-
But were those drives locked? I want to clone an unlocked 2TB drive to put in another Xbox in a different room. Both systems are TSOP'd
-
This does sector by sector cloning of Xbox formatted hard drives? The description of the product from the link you sent doesn't mention sector by sector offline cloning.
-
This is an exciting project, and I have wanted to build an Xbox PC, but outside of an X-tender, how would I be able to swit h between 3 hard drives? Sent from my SM-G955U using Tapatalk
-
I'm not sure if this is the correct forum but here goes... What's the best way to clone a 2TB SATA Xbox HDD to another 2TB drive? I have an Inateck FD2002 that is a dual SATA USB 3.0 dock, that has an offline cloning feature, but every time I try to clone my 2TB Xbox SATA HDD using the offline cloning feature, I initiate the clone function, then it briefly starts the process, but the dock restarts itself. The USB cable is not plugged into it. Any help is appreciated. Thanks! Sent from my SM-G955U using Tapatalk
-
Incursion64, How do you add a delayload bit your config file? I will also be using a 2TB drive. Sent from my SM-G955U using Tapatalk
-
Yea I have a dual SATA dock that supports up to 6TB drives per slot, and has a stand alone clone function. I will try it with a 500GB Xbox drive to see how it works (both the source and the target drives are identical). Assuming there are no bad sectors, how reliable is using a dual SATA dock clone function? Will it work as well if I cloned from one 2TB drive to another 2TB drive, but they are both different brands/models (assuming there are no bad sectors)?
-
Does this support video previews? Sent from my SM-G955U using Tapatalk
-
Which cloning software for a PC? I thought Pc's don't read XBOX drives...
-
Can I use this to clone from one 2TB HDD to another 2TB HDD for use with a chipped XBOX? What if I only want to clone specific partitions (F or G) from one drive to another?
-
Is there a way to make this display info on an Xecuter 3 LCD panel? Or is this not possible because this is running via Unleash X?
-
Can someone make one of these for me? I don't have the time or steady hands... Sent from my SM-G955U using Tapatalk
-
What Features Would You Like to See a Dashboard Have?
XC-3730C replied to Dixie Normous's topic in Dashboards
I would like UnleashX to support LCD screens like XBMC does. -
How To Install an Aladdin XT Plus 2 Modchip in a 1.6 Xbox
XC-3730C replied to OGXbox Admin's topic in Modchips
What is the preferred guage of wire to use in a mod like this? I have 30AWG that I have used in other systems -
Does it feel better than an OG XBOX D-pad? Can you use analog sticks from a 360 controller in an OG XBOX control?
- 8 replies
-
- d-pad
- transforming
-
(and 10 more)
Tagged with:
Board Life Status
Board startup date: April 23, 2017 12:45:48