For some reason while trying to flash a new bios to my TSOP I got a message saying 'programming failed', and now I get no picture when my console boots and the LED flashed red and green. So i'm thinking it's bricked. I was wondering if I installed a mod chip would this then save the console? I've seen an 'Aladdin XT+4032 X2 Plus' on eBay and the installation seems very simple for these chips.
I am kind of new/kind of old to the scene, as I have an rev 1.6 Xbox that I bought brand new in 2006, softmodded and installed a 160gb harddrive, which is(was?) limited to 137Gb useable space, copied all my bought games to it, threw in a couple emulators, and then just used it on and off and basically forgot anything involved in the process to the mists of time.
Recently it wouldn't power on, so I replaced the common 5 3300uF caps that were leaking, and it was good to go. My brain noted that the 16 year old IDE hard drive will not run forever, and I should look at upgrading to a SATA configuration.
Due to the time gap, very old versions of software, I have now read so much conflicting information at this point am not sure what to do in 2021.
I no longer have the original drive. I don't appear to have an image of either drive (8gb or 160gb) in any of my backups either. My fuzzy memory says this is bad because of linked keys.
I do not have a PATA usb adaptor, or computer with PATA. I have an Xbox to USB adaptor, but I don't think I have a compatible thumb drive. Based on my research I've ordered the "correct" Startech SATA/PATA adaptor. The existing drive already has an 80 pin cable.
I do have ftp access without issue.
I'm attaching a 2 screenshots of my drive/system info, my questions are:
Is that key in the screenshot all I need? If not what is the best way to go about backing up the drive/board key "Just in case" things go bad.
And is Chimp (https://www.reddit.com/r/originalxbox/wiki/chimp/) still the best way to clone it to a new drive in 2021?
I undoubtedly will have more questions, but backing up is my first priority, and once I have a confirmed backup I will be much more comfortable playing with it, and hopefully updating the various software I have loaded.
Any "critical hints" or gotchas would be appreciated as well.
hey, im a bit of a newb when it comes to og xbox, but i just bought one for the first time off of ebay. it works great, but i know its a big deal to remove the clock capacitor. it looks like it may have been opened before but i dont have a torx screwdriver to open it up to check. im going to my uncle's on saturday so he can open it up and see. is it fine if i play it with the possibility the clock cap hasnt been removed? it works great in every other regard.
Board Life Status
Board startup date: April 23, 2017 12:45:48