Jump to content

Revert Tsop'd 1.0 Back To Factory Bios


VCoupe376ci
 Share

Recommended Posts

So when I thought my only possibility for a hardmod in 2020 was an Alladin X2, I decided to TSOP my 1.0 Xbox. That went successfully and it has IND5003.67 which works fine. I then came across someone selling OpenXenium chips with more bells and whistles than Team Xodus released and picked up one. After installing everything and flashing with X2 5035, the TSOP is now doing nothing and I'd like to revert it back to stock however I cannot find anything about the process. Can anyone shed some light on how I need to proceed? Thanks in advance!

  • Like 1
Link to comment
Share on other sites

Did you do a backup when you originally softmodded your Xbox, you should have a copy of your retail bios in that folder? If not you can get a copy off of the net to match your Xbox’s bios size and kernel.

you can flash it with evox but it will need to be the correct size or you will brick it.
you will need to uninstall the chip or you will just end up flashing it to that.

why not just leave it as it is in case your modchip goes down.

Link to comment
Share on other sites

I can not see any real reason to revert to the stock bios and if any thing it would be safer to keep it a nonstock BIOS in case of modchip failure.

 

but here is most of the stock BIOS files.

MS.rar 

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Link to comment
Share on other sites

On 6/14/2020 at 12:46 PM, Ging3rguy said:

Did you do a backup when you originally softmodded your Xbox, you should have a copy of your retail bios in that folder? If not you can get a copy off of the net to match your Xbox’s bios size and kernel.

you can flash it with evox but it will need to be the correct size or you will brick it.
you will need to uninstall the chip or you will just end up flashing it to that.

why not just leave it as it is in case your modchip goes down.

 

On 6/14/2020 at 4:16 PM, SS_Dave said:

I can not see any real reason to revert to the stock bios and if any thing it would be safer to keep it a nonstock BIOS in case of modchip failure.

 

but here is most of the stock BIOS files.

MS.rar 1.69 MB · 0 downloads  

 

Cheers

SS Dave


Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

 

Thanks for the input. The reason was simply my OCD and that with the OpenXenium installed the TSOP is redundant being that Insignia will work on modded consoles when it is released. Strangely enough what you both suggested (modchip issue). For some reason a few days ago I was playing at night and all was well, but when I powered on the console the next morning, all of the RGB LED's including the one on the modchip itself stayed dark and the chip would not boot. Opening the console and removing and reseating the chip on the pinheader revived it. No clue why or how it happened and haven't had any issue before or after that, but in that instance the TSOP allowed me to play without pulling the console apart right then. Thank you both for the help!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Content

    • By KpCollins
      Hello
      So I have a Chip called a jafar, Its an upgraded Aladdin XT with Xblast. 1 Bank of 512, 1 256 and the last 256 is reserved for the Xblast which always boots first.
      My Question is how do I get Dual Dashboards with this? I have UnleashedX as I've always liked it but want to give XBMC a try
       
      Ideally I'm looking to have say Unleashed X boot with the 512mb X2 5035.137 bios and XBMC Boot with the evox.m8plus bios or visa versa
      After extensive searching online I am none the wiser, Could someone point me in the right direction to get started?
    • By Danthuyer
      G'day mates ! (typical aussie speak i swear)
      I've had a bit of a break from the OGX scene however I am back now and picking up the peices after I did what I wanted to with some old projects.
      Thanks to @SS_Daveive got a $20 bargain 1.4 board working again (afte I butchered an LPC build) however I want to extract an old bios file I wrote a couple of years ago on my Duo x3 chip.
      Whats the best tool to estract it and then edit it to see what is in it so I can modify it for this new box. As I have a strong feeling the file I wrote was for a slimeline I made with a DVD delete, however It has some colours and settings I changed that I want to use for this new OGXBox.
      Cheers - Dan
    • By adam hunter
      hello my friends i have an xbox 1.0 and i want to install modchip for what is best one for it and also mine works with 100.125 ac and i want to change it to 200.245 ac because iam living in kuwait how i can change that and can i change hetsink fan and use thermal grizzly thermal paste  

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.