Jump to content
Sign in to follow this  
sapi3nt

XBox Red/Green Blink. No Video After Flashing

Recommended Posts

I have a xbox. I softmodded then removed softmod. All went well. Softmodded with unleashx and later removed. All was fine. Then yesterday went to softmod with sid. In middle of process or at end xbox shuts down like normal. Then turned back on and now red/green flashing ring and video is not working. Any ideas? I have tried letting the clock reset but made a sure not to leave the console off more than about 5 to 10 minutes. I have left it on all night trying to find a solution. I am worried if I unplug it or power it off much longer it may turn into a brick. Any ideas? I loaded and backed up everything correctly. I have 2 video cables and checked that as well and no dice :( any help would be appreciated. The video im sure went out with the new softmod install. Not sure why. Any help would be appreciated. Id rather fix than throw it at the wall lol.

Edited by sapi3nt

Share this post


Link to post
Share on other sites

So you removed the soft mod and now it is not booting.

I take it that it's not the original hard drive.

Fit a mod chip and start again.

 

SS Dave

 

 

Those who can hard-mod, Those who can’t soft-mod.  

Share this post


Link to post
Share on other sites
13 hours ago, KaosEngineer said:

So, where's the flashing a BIOS occur?

You only mention installing, removing then reinstalling a softmod?

I did exactly the same, I installed a softmod, then removed it to put another thing and first I had error 16, then red/green blinking without video. I didn’t put a modchip or tsop. 

Edited by satchsatch33

Share this post


Link to post
Share on other sites

I would fit a mod chip and see if it come's good 1st

 

Cheers

SS Dave


Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By ProggerPete
      I bought a new OLED65B9PTA tv but am having issues connecting the XBOX to it.  I can hear audio but don't see any video.
      The tv has a 3.5mm socket labeled 'AV1' and an adapter cable that goes from white/red/yellow TCA sockets to a 3.5mm plug and that's what I've connected to.
      When digging for info I found Please login or register to see this link.  which says 'Unlike many of Samsung's sets, this one actually has an analog video input for legacy (non-HDMI) devices, although it no longer supports analog component video.'
      I'm not very clued up on exactly what the different outputs are.  Is the xbox output analog component video and that's why I'm not seeing anything?
      I double checked plugging into my old TV and the XBox itself definitely still works.
      I'll appreciate any tips you might have.
      Cheers,
      Pete
       
    • By N163LPH03N1X
      Hey Guys,

      I got a list of stuff Odd and Ends here that needs to go.
      Xbox, Dreamcast, GameCube stuff.

      I only have a limited supply of it.
      Once its gone its gone for good.

      I accept PayPal, please direct message me if you want to buy something
      and ill give you a shipping rate based on your address, super easy.
       
      Used Debug Shelled, upgraded 128mb Ram v1.0 Xbox -$350CAD


      Original Xbox Debug Kit Shell. Motherboard Rev. 1.0. 128mb ram upgraded board (Not Original Debug Board). Delta 1.0 NTSC PSU. TSOP Ind-Bios. Thompson DVD drive. 8gb stock hard drive. Software Details: Original Microsoft Dashboard Commentary: Missing its original Debug hardware (but can be converted with the right knowledge with current parts) The Motherboard used in this console is in immaculate condition. Clock cap was removed and CPU caps replaced. Original 1.0 fan heat sink was removed and replaced with a 1.1/1.6 heat sink. CPU and GPU was re-pasted. Some scrapes to the bottom of the shell and small scratches and one  small stress crack on top shell. Rubber Feet Missing. [Added my own custom rubber feet]. Shielding Intact.
      New IcedCube Gamecube Shell, Metallic Blue -$300CAD


      Details: Full GameCube Shell Replacement Never been mounted or used. Brand New In-Box Condition (other than taking it out for Photos). Hard to Find IcedCube Shells. Comes with all Stickers and parts. Perfect Combo with Qoob Pro or Viper. New/Opened SEGA DreamCast GDEMU Pro v5.56 [Black] + SD Extender -$80CAD

       
      GDEMU PRO Optical Drive Simulation Board for SEGA Dreamcast DC VA1 SD Extension
      GDEMU is a SD card based replacement for the optical drive in Dreamcast console. GD-ROM / CD-ROM drives inevitably wear out and fail – as do all mechanical devices – and since the console is no longer being manufactured it’s nearly impossible to source spare parts. This project was meant to provide a “once and for all” solution, since it doesn’t have any moving parts. 
      Features
      Replace your faulty GDROM Drive with a Solid State Optical Drive Emulation Board.
      Easy to install, the original optical drive seat can be removed and replaced with GDEMU, no welding, no modification to the machine board.
      Only suitable for VA1 motherboard DC Game machine, otherwise will damage GDEMU and do not plug in or pull with electricity
      100% compatible with game, perfect running original GDI image, and compatible with CDI image.
      Note: please don't upgrade the firmware, it is the latest firmware version, and it will be permanently bricked if you upgrade the firmware.
      Package Contents
      1 x GDEMU PRO Optical Drive Board
      1 x SD Card Extension Cable
      New Sick Mods Xerc CME Bundle [OG Xbox] -$60CAD


      Quanity Left: 2
      Install Tutorial: 
      Please login or register to see this link.
      Installation Video: 
      Please login or register to see this link.
      Preview Video: 
      Please login or register to see this link.
      Features
      Power Console On and Off via Xbox remote.
      Eject or close DVD tray on the fly with remote.
      Audio LED pulsation, LED's pulse to the sound of your Xbox.
      Remote configuration, setup and configure the buttons the way you want.
      LED chaser Mode, toggle through modes changes the LED chase patterns with remote.
      Speed up or Slow down led sequence.
      SmartXX OS boot Support
      Connects to MS DVD Dongle internally for menu browsing with remote (Perfect for XBMC media)
      N64 Freaks Xerc 2XE  [OG Xbox] Used - $20CAD/ New -$25CAD


      New Quantity 3 Left
      Used Quantity: 4 Left
      The XERC 2 XE is a small device which allows you to turn your Xbox on and off with your remote control. You can also eject and emulate long and short power presses.
      The XERC can be configured to work with many different remotes, and you can change the button setup at any time without opening your Xbox. It also includes a bonus LED Fader feature on the status light. The IR Receiver is included.
      Features
           Pulse fading Xbox Eject/PowerLED
      Power Console On and Off via Xbox remote.
      Eject or close DVD tray on the fly with remote.
      Remote configuration, setup and configure the buttons the way you want.
      SmartXX OS boot Support
      Connects to MS DVD Dongle internally for menu browsing with remote (Perfect for XBMC media)
      New PulseVU 2X  [OG Xbox] - $25CAD

      Quantity: 2 Left
      This device pulses any LEDs you connect to it with the beat of the music coming from your console. It can also has all the features of the SICKmods Fader and works on the original "Fat" Xbox360's Ring-of-Light. This device works with up to 150+ LEDs.

      17 different modes allow you to set your LEDs to the VU mode, fader, dim, solid on, off, or any combination of those. Change modes easily by using an existing button on your console, rather than opening your console each time or installing another switch. A Quick Disable feature lets you quickly turn off your LEDs and then quickly turn them back on at a later time.
      This works best on 1.6 revision Xbox motherboards due to their standby power always being active.
       
      Face Plate LED Bars [OG Xbox]Colors: [Blue Black Green] - $10CAD

       
      Blue quantity: 11
      Black quantity: 8
      Green quantity: 10
      This device is used inside the OG Xbox's front face plate to allow under glow in front of the Xbox.
      Soldering is required to install up to 11 LEDs per bar with Resistors in Series or Parallel.
      Bars will need to be rigged up to a 5V source coming from the Xbox.
      Two Bars = 1 Set/1 Xbox for $10 CAD. Comes in Blue Black or Green PCBs.
      2TB SATA Hard Drive [OG Xbox] Lineberry Build - $250

      2 Terrabyte filled Xbox Hard Drive Ready to go into an Original Xbox with a IDE to SATA adapter
      [Not Included] Xbox drive Includes a full library of Xbox Games, Homebrew, Emulators & roms,
      Dynamically setup by LineBerry XBMC4Gamers Dashboard.
      Note: Drive is Unlocked and will need a modchip or Tsop to use.

      Please Message me for Inquires
      N163LPH03N1X

       
    • By FirstS0ul
      Hi,
       
      i have space only for to put the og xbox vertical. Is it possible?
      the dvd drive will not be used.
      Or is that a problem?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.