TEK Nemesis Posted May 17, 2019 Report Share Posted May 17, 2019 1 hour ago, SakisTheDrifter said: Even if the xbpartitioner formats the F partition with ER clusters,wouldnt the AID format menu correct it?because after i made the partitions with xbpartitioner,i run auto installer deluxe 4.53,format the whole HDD within its format menu and finally started filling the HDD After you did all that, what does XBpartitioner say? If it says "ER" then you still have a problem. Quote Link to comment Share on other sites More sharing options...
SakisTheDrifter Posted May 18, 2019 Author Report Share Posted May 18, 2019 16 hours ago, TEK Nemesis said: After you did all that, what does XBpartitioner say? If it says "ER" then you still have a problem. I didnt check and cant do it now since i have formated and filled my Hdd with F and G drive and dont want to reformat it with F only Quote Link to comment Share on other sites More sharing options...
TEK Nemesis Posted May 18, 2019 Report Share Posted May 18, 2019 23 minutes ago, SakisTheDrifter said: I didnt check and cant do it now You can still go there to check - it won't make any changes. Quote Link to comment Share on other sites More sharing options...
SakisTheDrifter Posted May 18, 2019 Author Report Share Posted May 18, 2019 i quess this is the correct image right? Quote Link to comment Share on other sites More sharing options...
TEK Nemesis Posted May 18, 2019 Report Share Posted May 18, 2019 No. Move the focus to another partition again. Quote Link to comment Share on other sites More sharing options...
SakisTheDrifter Posted May 19, 2019 Author Report Share Posted May 19, 2019 1 hour ago, TEK Nemesis said: No. Move the focus to another partition again. If i do it,it will say ER to partition F again Quote Link to comment Share on other sites More sharing options...
TEK Nemesis Posted May 19, 2019 Report Share Posted May 19, 2019 3 minutes ago, SakisTheDrifter said: If i do it,it will say ER to partition F again That was the point. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted May 19, 2019 Report Share Posted May 19, 2019 Which BIOS is being used? Quote Link to comment Share on other sites More sharing options...
SakisTheDrifter Posted May 30, 2019 Author Report Share Posted May 30, 2019 On 5/19/2019 at 12:01 PM, KaosEngineer said: Which BIOS is being used? Ind Bios 5004 Quote Link to comment Share on other sites More sharing options...
SakisTheDrifter Posted May 30, 2019 Author Report Share Posted May 30, 2019 On 5/19/2019 at 4:00 AM, TEK Nemesis said: That was the point. So the solution is to find a way to format with 64KB clusters instead of ER right? Quote Link to comment Share on other sites More sharing options...
TEK Nemesis Posted May 31, 2019 Report Share Posted May 31, 2019 2 hours ago, SakisTheDrifter said: So the solution is to find a way to format with 64KB clusters instead of ER right? No, not for a small HDD. 64 for a 2TB but it will be a lot different for yours - maybe 16. Goal is to get rid of the ER. Quote Link to comment Share on other sites More sharing options...
Ging3rguy Posted May 31, 2019 Report Share Posted May 31, 2019 Here’s a conversion table for the max hdd sizes for klusters. You multiply the jouster size by 16 to get the max hddgb size. 8k x 16 = 128gb16k x 16 = 256gb32k x 16 = 512gb64k x 16 = 1024gb 1 Quote Link to comment Share on other sites More sharing options...
malarrya Posted June 18, 2019 Report Share Posted June 18, 2019 (edited) I had a weird problem with my 500GB hard drive not putting data on it beyond about half the drive ~225GB. I took the drive out, connected it to a PC using a USB external hard drive case, and installed EaseUS Partition Master (it's free!) . Once I could see the drive in the program, I removed all the partitions and had the program wipe the drive. I then put it back into the xbox, and formatted it with the Hexen 2019 disc and XBPartitioner. It's working great now and I have access to all 500GBs! I've done 2 drives this way. Be patient when you wipe the drive, however. It will take a few hours. https://www.snapfiles.com/get/easeuspartitionman.html I am pretty sure now this was caused from using a hard drive that already had Windows partitions on it. The drive needs to be completely wiped and clean. Edited June 18, 2019 by malarrya 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.