Jump to content
bluemeanie23

Xenomodchip/ Aladdin Modchip Gerbers

Recommended Posts

xenomodchip/ aladdin modchip gerbers 1.0.0

 

About This File

 

please note some renaming/modification of files may be needed to be viewed as they be old as fudge

Aladdin

Aladdin +

Aladdin++

enjoy

 

Please login or register to see this attachment.

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Sorry for the double post, but, after looking inside a couple of the archives, some have .jed files in them, which is the CPLD code, I assume.

 

Edited by obitus1990
  • Like 1

Share this post


Link to post
Share on other sites
44 minutes ago, obitus1990 said:

Sorry for the double post, but, after looking inside a couple of the archives, some have .jed files in them, which is the CPLD code, I assume.

 

wow, that's cool. Gotta give it a try for fun.

  • Like 1

Share this post


Link to post
Share on other sites
has anyone built one of these successfully?
got some boards printed (adv+ flavor), m4a3-64/32, 49lf020a (robbed from xt4032 aladdin), programmed the cpld with the jed file in the folder, and i get nada.
the cpld does not seem to be outputting a d0 signal so it seems something is broken in the cpld.

Share this post


Link to post
Share on other sites
On 3/7/2019 at 8:36 AM, bluemeanie23 said:

Please login or register to see this link.

What was this file?  It has expired, no longer accessible on zippyshare.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Rochdaleguy
      Hi all.
      Came across my old original modded Xbox in loft the other day and had a play and realised I’d missed it.
      Decided to get back into the scene and do some updates on it. Increase hard drive from 160gb to 2tb and a few other bits and pieces..
      i have the old Aladdin Advanced mod chip which boots to evox on long power press and stock on short. Now as Xbox live is no longer a thing on original Xbox, I’ve no further need to keep booting to stock as default.
      Whats the best way to alter it to have it boot with the chip active all the time? Or is there still a benefit to dual boot? If so can I switch the long and short presses around?
      Been a long long time since I messed with these things.
       
      All help appreciated.
      Please login or register to see this attachment.
    • By bulkchart32
      i did my 1st hard mod on a xbox today. i used an alladin modchip on a v1.4. the modchip wouldn't even go on because a cap was in the way so i heated the solder on the cap and leaned it back until it was hitting the cap behind it. now the modchip will go on but it is rubbing against the cap. i think it will eventually cause a problem. how can i fix this issue?
    • By Kink43
      Hi I have installed my Aladdin xt today. I didn't expect to run into any issues as seems simple enough and I can solder small things neatly as I'm used to modifying car ECUs. 
      I think where I have an issue is the d0 wire, none of the guides actually show it connected not can I find an image online.
      The guide I've followed seems to say connect the d0 point on the board to ground. I have done this I think. Please see my picture and it causes my Xbox to not boot just flashes red light. 
      Please can someone help me with where it needs to connect to
      Please login or register to see this attachment.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.