Search the Community
Showing results for tags 'xenium'.
-
I will sell a set of chips visible on the photo. They all work. 170 euros plus shipping I ship from Germany Can be picked up in person. Paypal payment friends.
-
Greetings again! Running XeniumOS 2.3.1, but it turns out no bios are present. I've done some research, but the information is scattered from over 15 years and there are a lot of different opinions on the matter. What are the present day recommended bios for open xenium running xenium 2.3.1? Are there any bios/dashboard packages or bundles available? Thanks!
-
Greetings! I am very new to the OG XBOX (both the console and the forums). I have a 1.4v xbox that I have dusted off recently to install Open Xenium chip. The console was a bit dirty, so I gave it a good cleaning, removed the clock capacitor (which had just started to leak), replaced the fan with a Nexus, and installed the new open Xenium chip. The system seems to be running great and immediately boots into the Xenium OS screen when powered on. The problem: no controller inputs are recognized in any of the controller ports (I've tried with four different working controllers). So basically I boot to Xenium OS, but cannot select any of the menu options. (I should also mention that before the Xenium install, everything had been working fine). Now, when this first happened, naturally my thought was that I had not properly reconnected the ports back to the motherboard, but upon checking they seemed to be well connected (I cleaned the ports and reconnected for good measure). I have looked at the traces on the motherboard and they seem fine. I imagine the chip install went okay since I can boot into Xenium OS(?) Port have been cleaned thoroughly. The only thing I have not tried is swapping the 1&2 ports with the 3&4 ports (in case there is a problem with port #1, and Xenium OS will only recognize input from Port #1???) Does anyone have any idea what the problem may be? It seems odd that none of the 4 controller ports are working, and all I am left with is an idle Xenium OS screen on my system. Could it be a single bad solder joint on the Xenium chip?Could it be that Port #1 is busted? Thanks for the help!
-
Hi I recently installed and openxenium modchip chip. It is working flawlessly. I want to do two things with the Xbox. Number one I want it to play the library of Xbox games. Number to I want to make it an emulation box. Here are the problems I'm running into. 1) when I try to install Rocky 5 XBMC emu station via FTP it locks up with just a few kilobytes left during the transfer. I have tried to build my own version and use the pre-built version. 2) second thing is I want to replace the dash with a good dash and I'm looking for recommendations. 3) is there any software that will rebuild a hard drive to bone stock? Or a listing of what would reside on the hard drive in a bone stock as new Manor? Thanks in Advance, Rob
-
i have an original xenium chip 2nd gen (the beige one you can add an lcd ) i havent touched my xbox in years and i added a it with a solder less adapter . when i boot my xbox it blinks 3 times and shuts off , i moved it to my second xbox and it just stays on red ,never turning green . I flipped the switch but i dont remember what it does, but that didnt help either .i hard solder the pins and solder a wire to the d0 on the chip and then tried to plug into the hold but doesnt seem to fit . does anyone have a guide or have any insight what my be wrong ,its been at least 10 years i have actually tired to boot my xbox and im trying to fix it ..i was thinking may i need to re-flash the chip but i dont remember how i even did it the 1st time .. any trouble shooting guide one be muched apperciated
-
is there an alternate place to solder the d0 port than the chip ? im trying to do a hotswap to reflash my other chip
-
In search of a full 2mb flash memory dump from an xenium.
-
Hey everyone if you got a spare xenium chip im currently looking to buy one
-
Looking to buy Xenium Chip.
-
I have a xenium chip with led board for sale $100 dollars shipped I have to already not planning I using this one
-
https://github.com/Ryzee119/spi2par2019 Not to sure why this hasnt been spotted yet no doubt he will make a release thread on it in the next few days this is just a heads up ogxbox legend Ryzee119 has done it again for anyone who has a Xenium modchip and wants lcd support with temp status fan speed and compatable with everyapp that i could find that has lcd support. You bloody ripper cheers Ryzee119
- 28 replies
-
- 7
-
-
-
- xenium lcd spi2par
- ryzee119's
- (and 2 more)
-
Hey guys if anyone has or know someone that has a xenium chip for sale let me know i would either pay cash or i have tons of retro games to trade as well.
-
Custom Red LED controller Ports with matching Red LED Power/Eject Board. Comes with lifetime warranty. If one ever fails I will replace it for free minus the shipping cost. These are very bright and match 100% although the picture kinda takes away from how deep red these really are. $24.99 Shipped anywhere in the lower 48. Can ship worldwide. Other colors available: Blue, Green, White, Purple, Orange, Red Any questions, simply shoot me a message! Thanks guys!
-
My experience with the original xbox goes back to early after launch. My first one died a horrible death after many stuggles with the xenium ice modchip Looking back I'm sure I was more at fault than the chip. My second one (softmodded) is in the living room hooked up to a hdtv. My third one (softmodded) is hooked up to a sony tube tv and my forth is sitting across the room on a table awaiting the next mod project .I'm glad i found this place because you guys are an invaluable source of knowlege. thanks and best wishes.
-
i was trying to install 500gb hdd did not work ,than i rebooted the xbox and now the modchip stays red ,and no video audio
-
Picked up a $5 Xbox off of local buy and sell site in Ontario Canada. Got the Xbox working notice it had a modchip got the modchip working it was a xenium chip.. when I was in the mod chip options I noticed that there was a bunch of skins five in total. I contacted a few of my friends who told me that these are very hard to come across some may even say rare. So now I upload to everyone in the forms here. Please download and enjoy these beautiful hard to find skins. And please share and pass these around. Thank u Frank XeniumOS skins.7z
-
- 2
-
-
-
- mod
- mod chip xenium
- (and 6 more)
-
Looking for a X3 LCD front panel. What's out there? Message me if you have one available. I do have some trades available and paypal. Located in New Hampshire, United States.
-
Limited Edition Mountain Dew Xbox [1 of 5000] Never been opened or modded. 100% unmolested. Stickers still intact. Overall in great condition. Includes 1 power cable and one A/V Cable. Located in New Hampshire . Asking: $229.99 + Shipping to the lower 48. Will ship to Canada and Europe just message me.
-
So I just scored a xenium chip, which came free with a broken Xbox. the seller just said it was broken, didn't even know the chip was in it. Its a 1.1/1.2 and the board looks like new. Turns out the old owner has never flashed the chip and was running the stock dash, but had some how managed to switch the chip switch so it was half on half off, so it wouldn't boot. well I fixed that and slapped a new drive in to take advantage of the set up tools. so now I have two dilemmas. 1. what's the best bios to drop on this chip, it's currently in the 1.1/1.2 board. 2. Should I just take it out and put it in one of my 1.6's which are near useless without being chipped. Because it's a waste in a board that can be so easily Tsop'd That said it has one of the teamxodus solder less LPC pads. Can you remove them ?. any ideas or feedback from you guys ?
-
So you got one of these suckers installed in your 1.6 xbox, me too. Change the stock HD for a 500GB one. I got into the xenium os from boot, and loaded retail dashboard to change the clock, spot on. Rebooted back to Xenium, and loaded Evo, and setup my ftp ip, and noticed my hd only registered 129gb,well i was having non of it. So i ftp'd xpartioner 1.3 over, ran it and it told me i needed lba48 version 2, hmmm. Now this part is what i found online after massive searches and swearing bouts. Remember the usb lead you got for softmodding, well your gonna need it again with your flash drive. put your Hexen disk into pc and extract the bios file. The one you need for the 1.6 is (evox.m8plus.v16.fc.137.bin) put this file as is onto your flash drive. Plug drive into xbox, and boot to xenium os. select launch menu, and add new item, pick flash and select your evox file, name it give it a colour, and launch it. Job Done if you get any problem give us a yell.
-
pinheader_Install_Manual.pdf
-
Quick_Solder_Install.pdf
-
V1.6_Install_Manual.pdf
-
xenium-s-adaptor.pdf
Board Life Status
Board startup date: April 23, 2017 12:45:48