Search the Community

I just need to know how to wire these LEDs up and what the resistor values are. I can't find any place that is either still up or still hosting photos.

Hey Guys, I got a list of stuff Odd and Ends here that needs to go. Xbox, Dreamcast, GameCube stuff. I only have a limited supply of it. Once its gone its gone for good. I accept PayPal, please direct message me if you want to buy something and ill give you a shipping rate based on your address, super easy. Used Debug Shelled, upgraded 128mb Ram v1.0 Xbox -$350CAD Original Xbox Debug Kit Shell. Motherboard Rev. 1.0. 128mb ram upgraded board (Not Original Debug Board). Delta 1.0 NTSC PSU. TSOP Ind-Bios. Thompson DVD drive. 8gb stock hard drive. Software Details: Original Microsoft Dashboard Commentary: Missing its original Debug hardware (but can be converted with the right knowledge with current parts) The Motherboard used in this console is in immaculate condition. Clock cap was removed and CPU caps replaced. Original 1.0 fan heat sink was removed and replaced with a 1.1/1.6 heat sink. CPU and GPU was re-pasted. Some scrapes to the bottom of the shell and small scratches and one small stress crack on top shell. Rubber Feet Missing. [Added my own custom rubber feet]. Shielding Intact. New IcedCube Gamecube Shell, Metallic Blue -$300CAD Details: Full GameCube Shell Replacement Never been mounted or used. Brand New In-Box Condition (other than taking it out for Photos). Hard to Find IcedCube Shells. Comes with all Stickers and parts. Perfect Combo with Qoob Pro or Viper. New/Opened SEGA DreamCast GDEMU Pro v5.56 [Black] + SD Extender -$80CAD GDEMU PRO Optical Drive Simulation Board for SEGA Dreamcast DC VA1 SD Extension GDEMU is a SD card based replacement for the optical drive in Dreamcast console. GD-ROM / CD-ROM drives inevitably wear out and fail – as do all mechanical devices – and since the console is no longer being manufactured it’s nearly impossible to source spare parts. This project was meant to provide a “once and for all” solution, since it doesn’t have any moving parts. Features Replace your faulty GDROM Drive with a Solid State Optical Drive Emulation Board. Easy to install, the original optical drive seat can be removed and replaced with GDEMU, no welding, no modification to the machine board. Only suitable for VA1 motherboard DC Game machine, otherwise will damage GDEMU and do not plug in or pull with electricity 100% compatible with game, perfect running original GDI image, and compatible with CDI image. Note: please don't upgrade the firmware, it is the latest firmware version, and it will be permanently bricked if you upgrade the firmware. Package Contents 1 x GDEMU PRO Optical Drive Board 1 x SD Card Extension Cable New Sick Mods Xerc CME Bundle [OG Xbox] -$60CAD Quanity Left: 2 Install Tutorial: https://www.ogxbox.com/forums/index.php?/topic/1295-n163lph03n1xs-xerc-cme-case-modders-edition-installation/ Installation Video: https://www.youtube.com/watch?v=wrbh8Phqy3s Preview Video: https://www.youtube.com/watch?v=Y8XS_frnGgI&t=7s Features Power Console On and Off via Xbox remote. Eject or close DVD tray on the fly with remote. Audio LED pulsation, LED's pulse to the sound of your Xbox. Remote configuration, setup and configure the buttons the way you want. LED chaser Mode, toggle through modes changes the LED chase patterns with remote. Speed up or Slow down led sequence. SmartXX OS boot Support Connects to MS DVD Dongle internally for menu browsing with remote (Perfect for XBMC media) N64 Freaks Xerc 2XE [OG Xbox] Used - $20CAD/ New -$25CAD New Quantity 3 Left Used Quantity: 4 Left The XERC 2 XE is a small device which allows you to turn your Xbox on and off with your remote control. You can also eject and emulate long and short power presses. The XERC can be configured to work with many different remotes, and you can change the button setup at any time without opening your Xbox. It also includes a bonus LED Fader feature on the status light. The IR Receiver is included. Features Pulse fading Xbox Eject/PowerLED Power Console On and Off via Xbox remote. Eject or close DVD tray on the fly with remote. Remote configuration, setup and configure the buttons the way you want. SmartXX OS boot Support Connects to MS DVD Dongle internally for menu browsing with remote (Perfect for XBMC media) New PulseVU 2X [OG Xbox] - $25CAD Quantity: 2 Left This device pulses any LEDs you connect to it with the beat of the music coming from your console. It can also has all the features of the SICKmods Fader and works on the original "Fat" Xbox360's Ring-of-Light. This device works with up to 150+ LEDs. 17 different modes allow you to set your LEDs to the VU mode, fader, dim, solid on, off, or any combination of those. Change modes easily by using an existing button on your console, rather than opening your console each time or installing another switch. A Quick Disable feature lets you quickly turn off your LEDs and then quickly turn them back on at a later time. This works best on 1.6 revision Xbox motherboards due to their standby power always being active. Face Plate LED Bars [OG Xbox]Colors: [Blue Black Green] - $10CAD Blue quantity: 11 Black quantity: 8 Green quantity: 10 This device is used inside the OG Xbox's front face plate to allow under glow in front of the Xbox. Soldering is required to install up to 11 LEDs per bar with Resistors in Series or Parallel. Bars will need to be rigged up to a 5V source coming from the Xbox. Two Bars = 1 Set/1 Xbox for $10 CAD. Comes in Blue Black or Green PCBs. 2TB SATA Hard Drive [OG Xbox] Lineberry Build - $250 2 Terrabyte filled Xbox Hard Drive Ready to go into an Original Xbox with a IDE to SATA adapter [Not Included] Xbox drive Includes a full library of Xbox Games, Homebrew, Emulators & roms, Dynamically setup by LineBerry XBMC4Gamers Dashboard. Note: Drive is Unlocked and will need a modchip or Tsop to use. Please Message me for Inquires N163LPH03N1X

Xbox Original Modded Console. Custom Painted with Case Window and LEDs. Controller Custom Painted. RGB AV Cable. Power Cord. $160 USA Shipped Cashapp or PayPal goods and services.

Anyone got a good guide on installing LEDs or a cathode tube into an original Xbox? I guess i need to know some good 12v and ground points

Need a checkup on building a EEPROM reader from a person with a background on electronics. Can I use two leds in series instead of a 5.1V zener diode rated at 1W for a EEPROM xbox original reader? Can a 3.0V coin battery or 4X1.2V AA batteries @ 4.8V be used as a external powersupply directly? Would 4.8V have too high of mAh or current for the EEPROM chip? I plan to use a serial to RJ45 with a connector to ethernet as a cable. I am using a bread board to create the circuit. I plan to use the materials I already have.

So I want to add some LEDs now to my Xbox. I don't have an understanding standing yet of electrical currents and voltages and resistors it'll be something I pick up as I understand but if someome could point me in the right direction or give me we ideas on the things I might need? I'm curious to how many LEDs I could run or how to figure that out.

I've seen mods that replace the CPU and GPU heatsinks with fan heatsinks (like the Iceberq 4 Pros). I want to do the same thing to my console, but I'm not sure where I could connect them. I have a 1.0 motherboard, so I could use the original CPU fan connector to power one. But where do I power the other? I've seen people use the exhaust fan connector to power one of the fans. How is that done, while still being able to use the exhaust fan too? Could I safely use a 3 pin y splitter on the CPU fan connector to power both CPU and GPU fan heatsinks? Or if I wanted to use a 3 pin splitter for the exhaust fan and GPU fan heatsink, would that be safe as well? Also, I would like to install 2 sets of LED lights. One would be 2 pin and the other would be 4 pin. Where could I connect these to power them safely? Everything is 12 volt. And I would rather not do any soldering. If I have to solder, i would rather it be wire to wire soldering and not directly to PSU or motherboard.

Custom Red LED controller Ports with matching Red LED Power/Eject Board. Comes with lifetime warranty. If one ever fails I will replace it for free minus the shipping cost. These are very bright and match 100% although the picture kinda takes away from how deep red these really are. $24.99 Shipped anywhere in the lower 48. Can ship worldwide. Other colors available: Blue, Green, White, Purple, Orange, Red Any questions, simply shoot me a message! Thanks guys!

Limited Edition Mountain Dew Xbox [1 of 5000] Never been opened or modded. 100% unmolested. Stickers still intact. Overall in great condition. Includes 1 power cable and one A/V Cable. Located in New Hampshire . Asking: $229.99 + Shipping to the lower 48. Will ship to Canada and Europe just message me.