Search the Community
Showing results for tags 'error'.
-
Good evening, I'm trying to fix an xbox that I've bought online that states the "Your Xbox requires service" with no error code everytime I try to play a game. Weirdly there is one game that I'm able to play. A crappy demo CD with a few games, and I can only play the FIFA 2005! The xbox was unopened when I bought it and I already managed to debrief a few things, the DVD player is fine, the IDE cables that connect the DVD to the motherboard also seem fine (tested the dvd power connector for continuity on each pin). Since I'm able to use the main dashboard I can also access the hard drive, it lets me erase save's , so it seems that the xbox is able to read and write on the HDD. At this moment I'm not sure what to explore further , nothing too weird on the motherboard too, all caps seem fine. PSU doesn't seem to have any trouble too.. Any ideas? I'm lingering towards something in between the PATA and the MCPX.. but it seems like a longshot. Thanks in advance!
-
Hi all, Hoping to get some help on this one as i'm really stumped. Problem: I'm restoring an Xbox and trying to get a fresh built HDD paired with a motherboard using nulled (1's) key, but still getting E06. Steps I've taken: 1. Built a fresh drive using XBHDM, locked the HDD with all 1's, and verified it boots correctly into a working soft modded xbox with nulled HDD key in the EEPROM (all 1's). 2. Read the EEPROM of the target motherboard using PiPROM, edited the eeprom.bin file to null the HDD key with 1's and written this back to the EEPROM. 3. Read the EEPROM again and verified its indeed now all 1's in the HDD Key. 4. Installed the newly created and locked HDD from step 1 into the target motherboard. 5. Error 06 Other info that may or may not be relevant? * HDD i'm building is an original 8/10?GB Seagate drive, but i've also tried two original WD drives in step #1 and the same issue arises. * Target motherboard revision is a v1.1 Any ideas whats going on here?
-
I need help. I cloned my 1.5 tb WD Green HDD to my new Hitachi 3tb Hdd and now when ever I boot it gives me an error 13. I'm using ind-bios .5004 and I tried using the heimdall engineering disc to reinstall the dashboards and repair them, but I still get the same error. Does anyone have any suggestions on what to try next. My console is hardmodded with an alladin xt chip and it ran fine before the cloning on the previous HDD.
-
First of all im sorry if this is in the wrong place i couldnt find an Xbox support section on the forum and this seem like the most correct place. I burnt Hexen to a DVD and then after there was nothing showing up on the disc so i double checked the iso by mounting it and then it said its corrupted. I'm using the Hexen 2018 disc from this website. I also tried downloading from both Mega and mediafire and i'm getting the same problems. When I try opening the disc when its mounted i get this. This is what showed up on the disc after burning. I didn't want to test it in my xbox incase something went wrong. I wanted to check with people that are more experienced then me as i only just got my Hard modded xbox. Link i used to download Hexen 2018
-
I've tried to boot with a newly formatted 2TB SATA HDD, and have been having issues... Cerbios Hybrid 2.3.1 UDMA5: Stays on the Boot Animation. M8Plus Titan & Stock (TSOP): Error 21. XBlastOS: Black screen, jumps back into XeniumOS The chip has XeniumOS 2.3.5. The drive has been formatted with FatXplorer using the Cerbios preset, and is unlocked. The only data on the HDD is the default C:\ contents from the XBOXHDM build of Rocky5's installer along with cerbios.ini and the BootAnims folder. I used CerbiosTool to generate the ini and have set "DashPath1" to "C:\xboxdash.xbe" and "DriveSetup" to 1 (No HDD, Legacy), with everything else being "stock". Does anyone know what could be the problem? UPDATE: Turns out it was an issue with using Rocky5's softmod files on a hardmod. I fixed this by just copying Rocky5's UnleashX build from xbins onto the C:\ partition.
-
I got a lockable hard drive I wrote the Xbox dashboard files to the hard drive but when I tried to lock it and then put it back in my Xbox .my Xbox came up with error six so I checked the hard drive password again and they were the exact same.
-
Tried to turn my Xbox on, it attempted to start 2 times and stayed on the 3rd with blinking orange/green lights at the same time (half orange, half green) and no A/V output. It is a 1.1 and I have removed the clock cap and jumped some trace rot that was causing it to turn on whenever it was plugged it, but the flashing and lack of A/V out persists. I have a reddit thread that has video of the error lights and shots of the main board and power board before clock cap and trace repairs. I am stumped. I cannot find that error anywhere and I don't have much experience diagnosing Xbox problems. Any help would be great.
-
I tried to load a DVD-R of the Rocky5 extras disc (trying to TSOP flash with a lost usb cable and nonworking Ethernet), and now my system throws up an error 21 on boot... The HDD refuses to be recognized by fatxplorer (could the locking be the cause?) after attaching it to my PC via this adapter. I'm considering just trying a modchip, although the only I found so far (OpenXenium) requires internet for a BIOS flash, so I'm hoping there's a way to make this drive bootable again.
-
Hi all, First of all, I'd like to thank Rocky5 and all involved in the softmodding tool, that really is a painless way to softmod. 18 years ago I was reading unofficial magazines on Xbox mods and was baffled by all that's possible and I'm glad I can start doing similar stuff thanks to you! I'm seeking help in the following problem, I posted this on Reddit but maybe you guys will have a better idea of what's going on here. I have seen several topics with the same problems over different boards but have yet to find a solution. I hope you guys don't mind. I've been stuck on this for the past few days. I'm trying to clone my hard drive (Seagate ST310211A, the 10GB one). I've tried using a WD3200AAJS, which was listed as working on x-pecs by multiple accounts, but haven't had luck as it returns Error 11 (missing/malfunctioning dvd drive). I know for a fact the drive is fine because when I plug everything back together with the stock drive, the console boots properly. Now, the WD is rated for 0.68A at 5v and 12v, so I looked up the current rating for the stock Seagate, which is here : Since the WD was quite a bit higher I took another hard drive I had lying around (Hitachi HTB-DS7AE100(B) ). Now I hadn't seen anything telling me this drive would be lockable or anything but I gave it a try nonetheless. Chimp recognized it fine and the clone went smoothly and it locked okay. The drive is rated for 0.42A for both 5 and 12v, so I thought it'd work better now. Still no luck as I get error 11 again. I do have a new 80 wire 40 pin cable, and am using the startech adaptor. The cable works fine with the stock drive, and the startech adaptor has good reputation, so I'm really at a loss here. Jumper switched back from slave to master (forgot it once and had error 7 this time). Can it be the hard drive drawing too much current and not leaving enough for the dvd drive? Dvd drive tray opens and closes even with error 11, everything's plugged in tight. I'm really at a loss here so any help is greatly appreciated, even if it's just 'buy this HDD, it works fine with the startech adaptor' ! -
So after installing the mod chip and uninstalling the mod chip. the hard drive i forgot to lock. now im getting error 5 means it needs locking. i do how ever have another modded xbox. can i put the hard drive in the modded 1 . lock it using the tools and put it back in the unmoded console again any help please. just need to get it locked again
-
Getting error 12 and I feel like I've tried everything... cleaned the laser, the pcb, checked my wires and connections, everything seems good the drive even seems to work fine lol. I've got a mod chip on the way but it won't be here until March sometime probably this is super annoying.. although the laser resistance is reading 3.6k no matter how much I try to adjust it it seems stuck at the resistance. Everything else seems good even checked all the resistors on the pcb by the ide cable. Here's a video of the error code and the drive https://streamable.com/12oewm heres a pic of the only other thing that looks possibly damaged https://i.ibb.co/7yRzBqB/327869220-5958167487563144-7908614504502997769-n.jpg it's the right corner of the pcb attached to the laser but its hard to tell bcause I've never seen another one. If I can't fix this I'm going to have to wait at least a month for the Stellar mod to show up Somebody help me please!!
-
still having this issue i get freezing/buzzing at the flubber logo with my hdd installed with everything correctly in place using the FatXplorer 3.0 beta to build/preload the drive and I have EVo bios installed too so hdd locking shouldn't be an issue i get a 07 (hdd time out) with no hdd installed (pretty obvious) -
haven't used my xbox's in a while. been recently trying them with insignia though. on one of my hardmodded xbox, i have xbmc4gamers as my homescreen. when i go to the down loader to try and download anything i always get some type of urlloader error. this even happens when i select the updater. please help.
-
This is happening on a stock console btw, I've read that the Microsoft logo appearing indicates an XBE has been found to launch so it's more likely to be something besides the HDD, there's no error code or change in LED color. I could put a chip in it and see what happens but maybe someone else who's seen this before could share their experience and save me some time.
-
I have an original xbox that has the dreaded error 16. I researched fixing this many years ago and at the time seemed like too much trouble. I'm wondering if there are any new methods that don't require a second HDD to swap back and forth? From my most resent research it sounds like there might be a way to bypass the issue to fix it using a dvd? Any help would be appreciated!
-
Good afternoon people!! Guys can someone help me fix my Xbox it was working normally but with a while XBMC started to crash very often not only it but the games too until it crashed with an error 09. One hour you turn it on and it works more crashes after one time and another he already gives the error. It already crashed with the following errors 07,08,09,13 and 21. and apparently "Partition E" is self-corrupting causing the video game to run out of dash and causing the error. Does anyone know how to fix this error, My HD is a 500gbs Western WD Green. https://www.mediafire.com/file/z51tk6qossm3y3t/20221101_151404.mp4/file https://www.mediafire.com/file/k77g7gwuueaike7/20221101_151441.mp4/file https://www.mediafire.com/file/ubbwh7pj0ysu7lj/20221101_151458.mp4/file
-
The CDDB database that was active when XBMC 3.5.3 came out is no longer up. There are others out there. But I need to know how to change the server. With kodi, you can modify the advancedsettings.xml, but I see no such file for the xbox version. Any way to do this?... Or am I gonna be browsing my CD's by "Unknown Artists" and rocking out to "Track 1, Track 2, and Track 3"?
-
it's possible that Lynx runs fine on Windows 8.1 because I downloaded it and it was apparently fine but when I embedded several files inside the XZP file corrupted, and when I embedded only one file inside the XZP got buggy
-
Hi Guys; I have picked up a faulty XBOX over the weekend which has an error 5 code. I removed the drive and connected to my PC with FatXplorer and I am able to view the contents of the drive. Which means obviously it is unlocked. Is there any way I can lock the hard drive and re-install it in the XBOX? What options do I have?
-
I went and tried to move files around so I could be xbmc emustation on drive E as I had it on F. Now when I boot up the xbox I get a fatal error message "special://masterprofile/guisettings.xml, Line 0 failed to open file" Now am I completely ruined or can I just somehow boot back to a dashboard and reinstall xbmc emustation?
-
Thank you everyone in advance for all the help. I was given an Xbox and it doens't work, showed error code 07, I assumed dead hard drive so I wanted to do a hard mod. I have an early revision Xbox, just installed the Aladdin XT hard mod with EvoX BIOS, the install was a success and I get the logo in the top left on boot, followed by an error code 07. I have tried a few different things as I know that is the result of a hard drive time out. I've tried multiple IDE hard drives, known good IDE cable, known good DVD drive, I've unplugged the hard drive data cable and it still shows error code 07. I have a Hexen 2020 disc at the ready burned using Windows built in tool. I have ordered a few things; IDE to SATA converter to test with a known good SATA drive, and 80 wire IDE cable. Please let me know what I should try next. I am starting to believe the hard drive is actually fine, because when I unplugged the data cable it did not switch to an error code 8. Thank you!
-
Got an v1.6 softmodded xbox (with non ejecting dvd drive) that i thought I could turn into a devkit system. Using MVG's 2018 Youtube video. But all i got was a bricked xbox. When i was supposed to start the pbl from the E: the xbox froze. And after a restart the xbox error 21 was present. I then fixed the drive belt on my dvd drive, so i now can eject and insert dvd's but no luck starting slayers-evox or any of my original xbox game. I didnt backup up the eeprom files. On the E: drive there was already present some similar PBL files - so i copied these to my pc before overwriting with MVG ones : ( boot.cfg, M8_LBA48_IGR_Q-06-BFM.bin, xbdm.dll, default.xbe (21kb), dashboard.xbx ) Is there a way to make this xbox come back alive ?
-
Hello there, I'm hoping to receive some help from you fine experts. First time modding an Xbox and unfortunately I think I made a blunder. Ended up with a service required error 21 screen and discs will not boot. After softmodding with Rocky5's tools I copied over Xblast OS and Cerbios to my C drive. Now the C drive partition was extremely small and wouldn't fit the bios bin so I temporarily removed what looked like some Japanese language files, I suspect this is why I'm receiving the error. Didn't have a mod disc, plan was to just FTP everything over. Was attempting a TSOP for the first time, and I had a Sharp model motherboard so I tried once and got no boot then decided to undo my bridges and just go the modchip route. I should also mention I recapped the CPU and removed the clock capacitor, I don't think this would cause such an error but other people might know better. So after undoing my TSOP bridges I was met with the error screen, whoops. So trying to salvage this, I don't have really any spare parts to try swapping, I suspect the route forward is to buy an IDE interface for my PC to reformat the HDD. Or would it be possible to just install a modchip at this point since I intend to install a large sata drive anyways. I did backup the eeprom and nullify the hdd key as well. Any advice/words of wisdom on how to proceed greatly appreciated. Thanks.
-
I softmodded my original Xbox with Rocky5 through Splinter Cell. I used chimp to clone the stock drive to a 320GB IDE drive, and everything was working great with UnleashX. I again used chimp to clone that drive to a 1TB drive using a SATA adapter which also worked through hours of gaming. I recently tried to play Halo CE using the disc, and about 10 minutes in, the game froze up. The Xbox booted up after restarting, but was really slow. I tried to clear the cache, and that froze. When I re-booted, I got an error 11. I replaced the disc drive, and got an error 16. I couldn't find the old OEM drive, but I did find my old 320GB drive which loaded up no problem. I used Chimp to repair the Error 16 on my 1TB drive, and after that, I got an Error 13. If I put in Halo 2, or Hexen 2018, it goes to an error 14. I went back to my old 320GB, loaded up Hexen 2018, and used the "Krayzie One-Click Softmod Installation". After that, I cloned to the 1TB drive, in hopes to get past the error 13, and still get error 13 on the 1TB. Back at the now "Krayzie" 320GB drive, when I try to launch the MS Dashboard through UnleashX, I get "Unable to launch "c:xboxdash.xbe". File does not exists." I copied the MSDASH files to the c drive, now I'm able to launch the MS Dashboard, and used Halo 2 to upgrade my dash. I've tried cloning to 3 different drives, tried different cables, and each time I get Error 13 on the drives I try to copy. On each of those cloned drive, putting in a disc goes to Error 14. Any help to figure out how to get this 320GB drive to clone to my old 1TB drive would be greatly appreciated.
-
Im quite embarassed to have to admit this, but im finding some of this modding stuff quite difficult dispite being an electrical/electronic engineer and have worked as a technician a various roles for over 30 years.Maybe its my age?I have got myself in a jam, I wanted to remove xbmc emustation and go back to unleash (sorry) but i was struggling to get emustation to work.Ive ended up with the Fatal error msg. (XBMC Fatal Error:No suitable skin version foundWe require at least version 2.1000IP Address: 192.168.0.6Starting FTP server...)Further more prior to this, i have been struggling to make a ISO image of extras disc.everytime ive downloaded it from git hub 613mb, when i try to unzip it i get an error msg from winzip?also if i try to make an ISO image and open zip file with imgburn or similar the folder appears to be empty?what am i doing wrong?from the XBMC Fatal error screen, can i just drag and drop something to rescue this from pcp using FTP client.I want to weep!!!! Paul B aka Masterbateson p.s. Just found out there is a slight fly in my ointment, in as much as when i fished out my laptops DVD drive, i found out its only a ROM so untill i can sort something out I cant burn a disc.I was kinda hoping I could FTP the missing files to the HDD or boot from my Memory stick, i was hoping like when ive recovered a pc b4 using a recovery image on a usb drive.Guess Xbob doesnt play like that.suppose im going to have to find somewhere to burn a disc, annoying thing is Ive several old full size dvd re writers kicking about in the attic.Thanks again for help, will sort disc out 1st b4 i try anything else.cheersMrB
.thumb.png.f42da7287d0f269627e60f69c2f54ecc.png)
Board Life Status
Board startup date: April 23, 2017 12:45:48