-
Posts
837 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Calendar
Store
Everything posted by Ging3rguy
-
You can use chimp to clone you drive using a larger hdd, this will then copy your c and e partition across to the larger hdd.
-
Placing a Non Modded XBox's Hard Drive In a Hard Modded XBox.
Ging3rguy replied to Life_model_decoy's topic in Hardware Mods
He doesn’t have the original MB just the drive.- 4 replies
-
- 1
-
- hard drive install
- hardmod
- (and 7 more)
-
No, but once you flash the bios it will probably look for a dash on your C partition.
-
It’s just if someone hasn’t done a tsop before they can rule out the problem of not knowing if their bridges are good.
-
What disk/disks do you have? bios checker here https://drive.google.com/drive/mobile/folders/1zb721QqrKjrY313sfHCx7xvIYaXxMx6u/1QmJnbB-NJFH4f3TgVBmit-GRrSJ3Ah4M/1QUfN7l-d2PBhw0NEAXtimfCrDSFGHmKI/1ySJR7jZqX_7sGDocN21BOBfPT4AERFRH/1WktBsu7492NeRKmwDo3bPi26wG7xqxdH?usp=drive_open&sort=13&direction=a thanks xbmcmods4xbox
-
Do you have the evolutionx dashboard on your softmod? If so you need to make a bios folder and ftp or use a usbstick to load a bios to the folder, then just flash to the tsop. Do you know if your tsop bridges are good? You can use bios checker to tell you.
-
Why don’t you just use evox dash or Xblast os to tsop from your hdd? What’s your tsop chip?
-
Just get a 12v stepdown transformer with the correct connection and check the current or power rating for the screen.
-
Use 30 awg kynar wire, get some decent fine wire strippers. Fill the pin holes with solder that you need to use, presolder the pads and then just use the iron to touch the wire to the pads and pin holes. Use plenty of flux and set the iron to around 330 C. YouTube has plenty of videos on the rebuild.
-
Did you check the E partition?
-
If they are slightly domed replace them, buy a decent make like Panasonic, eBay is not always the best or cheapest place to buy them.
- 93 replies
-
- hyperkin
- hdmi issue
- (and 8 more)
-
Do a quick press on the eject button to power on to see if it loads modded dash, if not try the same on the power button.
-
Is a Thomson drive, it goes on the underside if you are looking down on the laser lens. It’s chipped, is it booting up okay? Try booting power button or the eject to see if one is ms and other something like unleashx.
-
The layout is different on the 360 & One, you would need to redesign the pcb. Is this an aesthetic thing?
- 2 replies
-
- controller
- mod
-
(and 1 more)
Tagged with:
-
Focus isn’t great but it looks like it may be the laser mirror. If you will have a working disk drive you can just swap it between the 2 xboxs. The new Xbox is just retail at the moment?
-
Do you have a working dvd drive in your other Xbox?
-
How is the adapter attached, have you piggybacked over the existing av port or removed it?
- 93 replies
-
- hyperkin
- hdmi issue
- (and 8 more)
-
Should I Be Expecting Issues When Connecting My XBox To My New Tv?
Ging3rguy replied to ProggerPete's topic in Repair
If your new tv will not except an analogue signal you are going to need an adaptor to convert the signal, checkout this article. https://www.retrorgb.com/xbox.html -
You are pretty limited for a 1.6, here’s an old chart show what bios work on different versions. I would just stick the M8+ that allows 2TB https://web.archive.org/web/20160316051856/http://xbox-scene.com:80/bios_retail.html
-
I would google xbox emulators, this site is the original Xbox.
- 5 replies
-
- lotr
- fellowship of the ring
-
(and 5 more)
Tagged with:
-
Read the thread and it will explain the issues.
-
Hi, it depends on your setup and game format. If you have a retail box, then you will need a retail disk. If you have a modded Xbox, you can play a retail copy, a backup of the retail disk or rip the retail to the hdd and play it from there.
- 5 replies
-
- lotr
- fellowship of the ring
-
(and 5 more)
Tagged with:
-
Read Ryzee’s post directly above yours regarding “A”, it is a quick boot feature and tells you which button to press for each bios. if you disable instant boot do you still have the same issue regarding ind-bios?
-
Here’s info on xbpartitioner with cluster sizes. If you have hexen use that and do a new hdd install. https://www.reddit.com/r/originalxbox/wiki/xbpartitioner?utm_source=share&utm_medium=ios_app&utm_name=iossmf Did xbmc show the profile directory?
Board Life Status
Board startup date: April 23, 2017 12:45:48