ChriZz
Members-
Posts
63 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by ChriZz
-
Nobody notices that?
-
That's new to me. Thanks for the correction. I only own originals, so that's the only way I know it.
-
L1 is intended to control the front LED.
-
I haven't read everything yet. But did the Xbox even work before or is it some kind of eBay victim? I also recently had this QUESTION in connection with 3 restarts. It was due to the damaged reset line (pin4) on the lpc. The previous owner simply fried them away. But it was repairable.
-
Working on a cap list. Want your opinions
ChriZz replied to FrostyMaGee's topic in General Xbox Discussion
From Nemesis https://www.docdroid.net/KjoNVm8/ogxbox-replacment-capacitors-pdf -
If nothing works, this is what I would do: get enameled copper wire and rewind it. It should be clear that the diameter and the turns must be identical.
-
Now I have to ask again. Did you have a sata to ide adapter? And question number 2, do you have that “infamous” yellow, 80-pin IDE cable. There were also many complaints that it led to errors. PS if you do a reflow like that without knowing what it is, well, it usually backfires. Greetings
-
Since you've already changed everything, things are starting to get difficult. I hope you don't have the same problem as I did when the heat sinks were removed. Because my console showed exactly the same error. See the picture in the attachment (3 torn pads under the CPU). The 5 capacitors on the CPU are also soldered properly, yes?
-
She tries to stop, as you can see in your video, but can't stop. To me it looks like there's something shorted on the circuit board and that's why it's going out. I would roughly check the CPU and GPU for short circuits (multimeter). The power supply works in another console, have you tested that?
-
Oh crap, shipping to Germanski costs more than the part is worth. A pity
-
Do you have a link to it? It would be new to me that they can be bought individually. Greetings
- 16 replies
-
- samsung
- pscd101301a
- (and 4 more)
-
This?
- 16 replies
-
- samsung
- pscd101301a
- (and 4 more)
-
Thank you very much
- 85 replies
-
- 1
-
- xeniummods
- v3.x
- (and 4 more)
-
Hey mad, I could use the DVD frame. Where do you ship from?
-
Closeted Xbox v1.6 with DuoX2 Hyundai chip - No TV-signal
ChriZz replied to Vanheden84's topic in Repair
Unfortunately you can't do a tsop because you have a 1.6. You can do a softmod first. Because the xbox runs without a chip, was that right? Rocky5 his is good. This way you can continue to use the Xbox normally and don't have to rush into buying any chip. You also have to keep in mind that there could be a defect in the LPC somewhere and a new chip wouldn't help you unless it's repaired. -
Hey nemesis, where did that picture come from? Looks like a pdf and seems very interesting. Maybe you could share this or send it to me. Greetings
- 85 replies
-
- xeniummods
- v3.x
- (and 4 more)
-
Closeted Xbox v1.6 with DuoX2 Hyundai chip - No TV-signal
ChriZz replied to Vanheden84's topic in Repair
Man o man google translate...hope you can understand it. -
Closeted Xbox v1.6 with DuoX2 Hyundai chip - No TV-signal
ChriZz replied to Vanheden84's topic in Repair
The grease you mention could be coming from the DVD drive. Isopropanol is fine for this. Try starting from one bank and then the other. If both don't work, that's obviously bad. Don't you happen to have another Xbox to test? If the duox2 were dead, you would get a question....That's not what they say.ps Ali's chips are shit. Better ask here in the forum. -
Closeted Xbox v1.6 with DuoX2 Hyundai chip - No TV-signal
ChriZz replied to Vanheden84's topic in Repair
No. The switch on the chip is to switch between the 2 BIOS banks.
Board Life Status
Board startup date: April 23, 2017 12:45:48