nbaj
-
Posts
30 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by nbaj
-
No matter formatting the HDD, once i run HDD raw copy, it will delete any partitions created I did not install any extra files
-
-
I tossed the old hdd This is the ribbon i use 24" 40-Pin 80-Wire Ultra ATA 2-Drive Ribbon Cable, Manhattan 332781
-
Mine is not an ISO, via backups
-
I was under the impression that the origins is an image. Use hdd raw tool to put in on a 2tb hdd which is easy to do Does HDD raw tool format the drive automatically? If i use fatxplorer to format the drive creating partitions, then hdd raw tool will wipe out those partitions No matter which option i choose (remove partitions or not) there is no C,E, F, G partitions Somehow, i need to get a dashboard installed
-
I have the latest fatxplorer. This is what i get when i load the drive. Either option shows partition X only, with nothing on it Guess i will try the OGxbox installer
-
No, i have a brand new 80 wire
-
Origins is an image. I was under the impression that i would use HDD raw copy to copy the image to a 2tb hdd How would i access the C drive? fatxplorer can't open the hdd
-
That worked, but now I get Error 13, can't boot dashboard due to missing key It's a 2tb xbox origins via backups
-
I will try this tomorrow
-
Yes, i used the very bottom on this pic
-
Would you be building the case via a 3d printer?
-
Modded a 1.6 with an Aladdin chip following a thorough tut on YT Rebuilt the LPC per the tutorial. I programmed with the latest cerbios. Pic attached isn't mine, but i followed this exact pic Powered on = frag Removed the hdd = frag Removed the disc drive = frag Disconnected the chip = no frag. Console booted up to the splash screen followed by errors related to the hdd and disc drive since they were disconnected Other then that Will cerbios run the origins 2tb? When i did a cerbios on a 1.4, i remember having to format the hdd with cerbios in fatxplorer Suggestions? Thanks in advance
-
What would you say it's worth these days ...
nbaj replied to MBL's topic in Rare and Uncommon Xbox Hardware
If the economy is terrible as you claim, then everything would be cheap. Simple supply and demand NFL and NBA are seling out home games like crazy -
In most cases, you get what you paid for Cheap is never a good thing
-
Nice
-
As long as you're not touching the chip or board, you're fine. It's not like you're applying 100 lbs of torque
-
How did it work for you? Mine freezes after the splash screen
-
just make your own
-
was looking for this thanks
-
looks good
-
Tips and best method/products for first time case painting?
nbaj replied to Cosmonaut Cartilag's topic in Case Mods
Wetsand with auto 600 Kyrlon base Krylon clear -
I'm using FATXplorer to transfer Never tried FTP
-
I'm using FATXplorer to transfer Never tried FTP
-
New to the xbox mod scene coming from the xbox 360 rgh scene Just finished up a cerbios with an Aladdin chip install / xbmc4 I am having an issue with any emulator from BU or AP They all unzip and transfer without errors. Ninja and Hyper both freeze after the splash screen. The only one that actually works is CO lite. OG title run fine Suggestions please on how to get past the freeze. I do have both install packs installed on Ninja
Board Life Status
Board startup date: April 23, 2017 12:45:48