Leaderboard

The Xenium (OpenXenium) has so many more features than the Aladdin modchip. Biggest one being multiple banks so you can flash and boot different BIOSes. (Not that anyone needs to boot more than one BIOS but you can't try others without wiping the one 256KB bank that an Aladdin has to try another.) Limited to using one 256KB BIOS with an Aladdin modchip. The XeniumOS can format a new hard drive in the Xbox without any other software. Albeit, doesn't do G drive and I believe only supports 16KB clusters for a maximum size of 256GBs for the F drive. Therefore, to properly format the extended partition(s) on hard drives larger than 250GBs, you'll have to re-format the extended partitions with XBPartitioner v1.3. @KingLuxor's eBay listing contains a bullet list of features of the OpenXenium modchip: (copied from there to here) Supported XeniumOS features: (taken from project repository) Software controlled BIOS bank switching (any BIOS combinations that fit into 1mbyte of flash memory (4x256k, 1x512+2x256k, 2x512k, 1x1mbyte). Instant boot to a chosen BIOS using the power button. Boot the XeniumOS with eject button. Ability to boot from the onboard BIOS (colloquially known as TSOP booting). This will completely disable OpenXenium and release D0/LFRAME(1.6) to boot the Xbox as if stock. All the standard features in Cromwell/XeniumOS. (EEPROM tools, Hard drive tools, FTP/SMB Server etc.). Three general purpose outputs. These are normally bitbanged as a SPI master (MOSI,CLK,CS) with the most common use an LCD, however could support any SPI peripheral in theory. Two general purpose inputs. On a Xenium, these are I believe intended to be MISO lines to complement the SPI interface but could be used for any 3.3V digital logic. Three outputs are connected to an RGB led (Or an external user added RGB led). Reserved memory on the flash chip for non-volatile storage of an EEPROM backup and XeniumOS settings. If you bridge the two recovery pins on power up, it will attempt to boot the XeniumOS recovery BIOS if available. This functions the same as a genuine Xenium modchip. LFRAME abort mechanism (Ref Intel LPC Interface Spec Rev 1.1 Section 4.3.1.13) for a v1.6 console to prevent the Xyclops responding to the MCPX LPC Memory Read requests during boot (and conflicting with an external LPC memory peripheral). This is generally accepted to be better than shorting LFRAME the ground constantly which some traditional LPC memory addons do.

I made this because I had a desire for a very clean, and feature-rich skin. I think I achieved that goal OGXbox.zip

Thank @Ryzee119 . I was trying for 2 days but gave up and ordered a Xilinx. hope it will work . I want to say thanks for all your projects!

@Nextria welcome to the constant struggles of programming CPLDs

disable the fast game loading in the skin settings toggles

is there any way that I can set the games to a "sub-directory" .... .inside my games folders they are ordered in a alphabetical folder structure e.g. (folder) #AB (folder) CD (folder) EFG (folder) etc. so by default the folder names given become the game names and system crashes. if I can't do this then I'll need to change the "other skin" :'(( edit: never meant to edit the post