Nextria

Thanks @madmon I feel like a idiot, because of the white boarder around the holes for pinheaders I thought I should be solderd there. now it is working!

@KaosEngineer sorry yes you right, thanks @madmon

Hey @KaosEngineer I programmed the chip again with your xblast sfv. but still no joy, the chip still is not working, i begin to think there is something wrong with the boards or the lc4032 The 49lf080a works if i put it in an aladdin XT chip, so thats good. the LC4032 programs okay without any error. I have checked everything for continuity and i dont have any bridges or lose pins. i am at a lose if anyone have any ideas please let me know !

Hey @KaosEngineer, Thanks for the uploads, i will try it asap, i hope its just the sfv, otherwise i really dont know what i am doing wrong. Regards Nextria

Hey @KaosEngineer Its also up on OSH park : https://oshpark.com/profiles/gothkar I am not 100% the same but i have to check tonight if is still have the original. Do you have a copy of the xblast sfv maybe my got corupted, last time i also had a problem with other files on my drive bing corrupt.

Hey @KaosEngineer I used the xblast svf to program the cpld, it says it programmed corrected. I use a STT49LF080, chip, first I tried to socket it, and later I solderd it directly, I tied the chip in a Aladdin, and it boots normal. So I think its the svf file maybe, but I used it before to make xblast chips from Aladdin XT's.

Hello, I tried to make this chip but i cant seem to get it to boot. i succesfully programmed the chips, but it will not boot. Any advise ?

Hello, thank you, what is the resistor that is needed ?

Have you checked the D0 wire? can you make a picture of your install,

Well it took me a little bit longer because of the flue and other things. I opened up the programmer and found a 3.3V point, soldered a wire to VCC (Vref) and now can program without the need of and external power supply. I want to make a small switch on the side so I can turn it off and on. but will do this another time, (have to get ready to move next month) Made some pictures if anyone is interested,

I will do that, i hope I finish them tonight and maybe look in to modifying the programmer.

I got the Xilinx programmer yesterday and it is working now ! the only downside is, it doesn’t supply the needed 3,3v to the chip. So to program the cpld I need to have it in the Xbox. i wonder if I can modify it the same way like my lattice programmer. on the board I search for a 3,3v pin and connect it to the VCC. And a extra wire to the ground strip around the board. this way it will supply the voltage to the chip and can be programmed outside the Xbox. just need to program the flash inside still the Xbox

Thank @Ryzee119 . I was trying for 2 days but gave up and ordered a Xilinx. hope it will work . I want to say thanks for all your projects!

i just finish soldering 10 pieces, and all have the same problem. I dont know if its to do with the lattice i use, i have ordered a Xilinx too. Hope to get it monday.

It only says the following: --------------Line41--------------: SDR 18 TDI(3FFFD) Expected TDO(00001) Expected MASK(00003) Received TDO(3FFFC) Bits Error 0001: Expected: 1 Received: 0 01/03/20 07:34:30 File e:\openxenium.svf: fail at line#:41(Check the log file for further details) I first thought i had to switch TDO and TDI, but than it gives me an error it cant find the configration. So it sees the chip, but for some reason it will not program it. I saw a video on youtube they programmed the CPLD in the xbox, but thats not necessary right ?

Hey TEK Nemesis I am using the Lattice Diamond Software, to try and program.

hello @Ryzee119, i have a question. i am trying to program a openxenium i made, with my Lattice programmer. but i get the following error, do you have any idea what could be wrong ? --------------Line41--------------: SDR 18 TDI(3FFFD) Expected TDO(00001) Expected MASK(00003) Received TDO(3FFFC) Bits Error 0001: Expected: 1 Received: 0 01/03/20 07:34:30 File e:\openxenium.svf: fail at line#:41(Check the log file for further details) i normaly also program the Aladdin chips with this one, and i modified it so it gives the 3.3v on the vcc The white light also comes on on the chip, and it tries to program it but fails. Hope you can help me, and thanks for all your hard work ! Robbert

I looked at everything but cant find anything wrong. An internal HDMI mod sounds cool but i already have so much problems with them. I have 10 Xbox cables so maybe i will try to make some cables myself. Or i will order them from @TEK Nemesis I now have 3 broken Xbox's, and one new one on the way.

I cleaned the board up, and found two other via's on the bottom side of the board, I soldered them in, and still the same. To be honest I don't have the best of luck with the adapters, I my last board (1.6) and used a pound cable I bought some months ago. Everything is working now, maybe I will me making some adapters like the pound, with the WII2HDMI. thanks @TEK Nemesis

@TEK NemesisI removed both the audio wires and don’t hear it anymore. Could it be that the points I solder the audio to are damaged, in the picture I already cleaned with alcohol i think with the soldering I damaged the green from the board a little bit. I bought a desoldergun and it think I should not put it on the board directly thank you for all the help

Hey TEK Nemesis, i removed the left Audio first and checked. still the same, than I did the right one, also the same. Than I did a complete cleanup resolder everything. And still the same, i did continuity test with my multimeter. and everything is connected i think I screwed something up on the broad, but cant seem to find what it is

Hello TEK Nemesis, i will check tonight or tomorrow morning. i will first make some pictures, and will desolder one of the audio wires and check again, this is also the first time i have this, i hope i can fix it, i already destroyed two motherboards

I have A new problem with another Xbox. i installed the wii2hdmi everything is working only I get distorted sound. i resoldered everything, still the same problem. Than I used another board I had have, but still the same. i used different hdmi cables different ports. but keep getting the same problem. any ideas?

Thank you, I checked with another motherboard I have and it is indeed the same. i installed the wii2hdmi adapter on this one and it works. So I shorted something on this motherboard during the installation of N64 freaks HDMI mod. By accident I soldered the 5v to the 3,3v on the hdmi board breaking it. Could I have damaged something on the Xbox with this as well? And what could it be, everything works except for some colors

Hey it looks like that but I checked everything with my multimeter and there are no bridges. Also I soldered everything 3 or 4 times and keep getting the same problem. Could it be the wii2hdmi boards ? EDIT: I was looking with my multimeter on the points I soldered before, and one of the resistors(?) Seems to be shorting, I don't know If it should do like this but when I measure it with continuity it shows its shorting, its FB4A1 or F84A1 I can't really read it anymore.