Jump to content
Sign in to follow this  
jhark

How To Avoid Solder Fumes While Modding an XBox

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By RazorStoJ
      Are these mods for the original xbox still available for the 1.5ghz CPU/128mb ram upgrade
      been searching for a while to no avail over here in Australia. Any info would be greatly appreciated
      - Razor
    • By moreno9
      I have a Xbox classic and I need to change its region from PATL to NTSC to enable the HD on xbox and yes, I am using Component Cable and I am sure the cable works fine. I have used the enigma program to change it. It says "press A for PAL or press B for NTSC". I do press B but when I reeboot the console with the key combination triggers + white /black button the region won't change. I enter again on enigma and the region remains "PAL". I enter on the original dashboard, I went to Settings and the option to set the 480p. 720p and 1080i won't appear.
      Someone told me about the Shadow C thingy but I don't know what is that and how can I do something to Shadow C.

      Please help me. I don't know what's wrong. Thanks.
    • By Matthers
      Hi
      Looks like the power supply of my Xbox has died and was going to swap it with another Xbox a friend gave me, but turns out the hardware got changed somewhere along the lines and it's not do-able to swap the power supplies, so figured i'd just swap the hard drive instead allowing me to keep my games/dashboard etc.  It's been a long time since i soldered the chip on my dead Xbox and the other one i have has a different chip.  Anyway, am getting 06, 13 and 21 errors on the Xbox with the newly installed hard drive.
      Is there anyway to keep my existing files on my original hard drive?   Remember something about the locking key on the Xbox hard drive - do i need to copy this over from the hard drive i removed?  Am looking at downloading the Hexen disc to start off.  Any help would be great.  Thanks

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.