Jump to content

Frag XBox With Dead Hdd?


Recommended Posts

How would you go about replacing a hdd in a dead xbox? mod chips? I've been looking for a tutorial but I can't find anything. Also, everything on the xbox seems to work, so but the hdd is just freaking out with sound, so I assume its the hdd 1.0 btw. 

Link to post
Share on other sites
12 hours ago, Millay said:

So just soldering a mod chip will allow me to switch out the hard drive?

ya, i had one that was dead on arrival and months later i tried this.. it worked. it boot to hexen and allowed me to build the drive. good times.

Link to post
Share on other sites
On 6/29/2018 at 6:44 PM, Dave Corrigan said:

Yes, but unless you are proficient in soldering electronic components, I would practice on something first..

ditto.

 

its not an easy install to rebuild lpc. some of us are fortunate to have a ton of mistakes behind us. alot of mistakes can be corrected, some cannot. destroying an xbox is always destroying an xbox. even a 10$ unit.... its one less functional xbox on this chunk of slag spinning around the sun

Link to post
Share on other sites
  • 3 weeks later...

EEPROM reader to obtain the data needed to lock a new HDD set up with XboxHDM.  PC with IDE if you use XboxHDM v1.9 or 2.2a or USB-to-HDD interface adapter with XboxHDM23USB Beta 2.

Or, install a modchip, Aladdin XT plus 2 (aka XT 4032, etc) boot Hexen 2017 or 2018 to format the new HDD and install the dashboard to it.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Amigaz
      Xbox console revision 1.0 in good condition with the following specs:
      TSOP flashed
      2TB SATA hdd
      Digitus SATA -> IDE adapter
      80pin IDE ribbon cable
      On the HDD is the excellent full Arcadepunks XBMC Origins frontend!
      Here is a video they made to demonstrate it: https://www.youtube.com/watch?v=XirumHggTqc
      The unit has been fully cleaned, no noisy fan's or bad capictors.
      The DVD drive is serviced and fully working.
      The power supply is 220volt
      Picture gallery with images of the Xbox running: https://jiggmaster.synology.me:5008/mo/sharing/5a0ZhM9jY
      Item located in Sweden, shipping worldwide
      Price = €100 excl. shipping
    • By madmon
      Hey so I have a 1.0 and the main fan header isn't working. Can I just replace the mosfet or is there a greater issue? 
    • By Lina_Inverse_
      Hi everyone!
       I have a 1.4 with trace issues, upon plugging in the power it starts automatically and when it's off, will occasionally boot at random.
      I managed to repair one trace as a preventative but not the 3 needed to ensure it's not an issue anymore, I found them too hard to work on
      https://imgur.com/gallery/ExATwa6 (not my pictures, just as an example!)
      I did the equivalent of the white wire and blue, is there another place to solder the other green/purple equivalent connections? It would be on the other side of the board I assume.
       

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.