Jump to content

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Jaggsy1986
      Hi, Can anyone explain to me how to get coinops gems working on origins. ie which folder to place it on and how to get it running i'm struggling thanks
    • By N163LPH03N1X
      Hey Guys,

      I got a list of stuff Odd and Ends here that needs to go.
      Xbox, Dreamcast, GameCube stuff.

      I only have a limited supply of it.
      Once its gone its gone for good.

      I accept PayPal, please direct message me if you want to buy something
      and ill give you a shipping rate based on your address, super easy.
       
      Used Debug Shelled, upgraded 128mb Ram v1.0 Xbox -$350CAD


      Original Xbox Debug Kit Shell. Motherboard Rev. 1.0. 128mb ram upgraded board (Not Original Debug Board). Delta 1.0 NTSC PSU. TSOP Ind-Bios. Thompson DVD drive. 8gb stock hard drive. Software Details: Original Microsoft Dashboard Commentary: Missing its original Debug hardware (but can be converted with the right knowledge with current parts) The Motherboard used in this console is in immaculate condition. Clock cap was removed and CPU caps replaced. Original 1.0 fan heat sink was removed and replaced with a 1.1/1.6 heat sink. CPU and GPU was re-pasted. Some scrapes to the bottom of the shell and small scratches and one  small stress crack on top shell. Rubber Feet Missing. [Added my own custom rubber feet]. Shielding Intact.
      New IcedCube Gamecube Shell, Metallic Blue -$300CAD


      Details: Full GameCube Shell Replacement Never been mounted or used. Brand New In-Box Condition (other than taking it out for Photos). Hard to Find IcedCube Shells. Comes with all Stickers and parts. Perfect Combo with Qoob Pro or Viper. New/Opened SEGA DreamCast GDEMU Pro v5.56 [Black] + SD Extender -$80CAD

       
      GDEMU PRO Optical Drive Simulation Board for SEGA Dreamcast DC VA1 SD Extension
      GDEMU is a SD card based replacement for the optical drive in Dreamcast console. GD-ROM / CD-ROM drives inevitably wear out and fail – as do all mechanical devices – and since the console is no longer being manufactured it’s nearly impossible to source spare parts. This project was meant to provide a “once and for all” solution, since it doesn’t have any moving parts. 
      Features
      Replace your faulty GDROM Drive with a Solid State Optical Drive Emulation Board.
      Easy to install, the original optical drive seat can be removed and replaced with GDEMU, no welding, no modification to the machine board.
      Only suitable for VA1 motherboard DC Game machine, otherwise will damage GDEMU and do not plug in or pull with electricity
      100% compatible with game, perfect running original GDI image, and compatible with CDI image.
      Note: please don't upgrade the firmware, it is the latest firmware version, and it will be permanently bricked if you upgrade the firmware.
      Package Contents
      1 x GDEMU PRO Optical Drive Board
      1 x SD Card Extension Cable
      New Sick Mods Xerc CME Bundle [OG Xbox] -$60CAD


      Quanity Left: 2
      Install Tutorial: 
      https://www.ogxbox.com/forums/index.php?/topic/1295-n163lph03n1xs-xerc-cme-case-modders-edition-installation/
      Installation Video: 
      https://www.youtube.com/watch?v=wrbh8Phqy3s
      Preview Video: 
      https://www.youtube.com/watch?v=Y8XS_frnGgI&t=7s
      Features
      Power Console On and Off via Xbox remote.
      Eject or close DVD tray on the fly with remote.
      Audio LED pulsation, LED's pulse to the sound of your Xbox.
      Remote configuration, setup and configure the buttons the way you want.
      LED chaser Mode, toggle through modes changes the LED chase patterns with remote.
      Speed up or Slow down led sequence.
      SmartXX OS boot Support
      Connects to MS DVD Dongle internally for menu browsing with remote (Perfect for XBMC media)
      N64 Freaks Xerc 2XE  [OG Xbox] Used - $20CAD/ New -$25CAD


      New Quantity 3 Left
      Used Quantity: 4 Left
      The XERC 2 XE is a small device which allows you to turn your Xbox on and off with your remote control. You can also eject and emulate long and short power presses.
      The XERC can be configured to work with many different remotes, and you can change the button setup at any time without opening your Xbox. It also includes a bonus LED Fader feature on the status light. The IR Receiver is included.
      Features
           Pulse fading Xbox Eject/PowerLED
      Power Console On and Off via Xbox remote.
      Eject or close DVD tray on the fly with remote.
      Remote configuration, setup and configure the buttons the way you want.
      SmartXX OS boot Support
      Connects to MS DVD Dongle internally for menu browsing with remote (Perfect for XBMC media)
      New PulseVU 2X  [OG Xbox] - $25CAD

      Quantity: 2 Left
      This device pulses any LEDs you connect to it with the beat of the music coming from your console. It can also has all the features of the SICKmods Fader and works on the original "Fat" Xbox360's Ring-of-Light. This device works with up to 150+ LEDs.

      17 different modes allow you to set your LEDs to the VU mode, fader, dim, solid on, off, or any combination of those. Change modes easily by using an existing button on your console, rather than opening your console each time or installing another switch. A Quick Disable feature lets you quickly turn off your LEDs and then quickly turn them back on at a later time.
      This works best on 1.6 revision Xbox motherboards due to their standby power always being active.
       
      Face Plate LED Bars [OG Xbox]Colors: [Blue Black Green] - $10CAD

       
      Blue quantity: 11
      Black quantity: 8
      Green quantity: 10
      This device is used inside the OG Xbox's front face plate to allow under glow in front of the Xbox.
      Soldering is required to install up to 11 LEDs per bar with Resistors in Series or Parallel.
      Bars will need to be rigged up to a 5V source coming from the Xbox.
      Two Bars = 1 Set/1 Xbox for $10 CAD. Comes in Blue Black or Green PCBs.
      2TB SATA Hard Drive [OG Xbox] Lineberry Build - $250

      2 Terrabyte filled Xbox Hard Drive Ready to go into an Original Xbox with a IDE to SATA adapter
      [Not Included] Xbox drive Includes a full library of Xbox Games, Homebrew, Emulators & roms,
      Dynamically setup by LineBerry XBMC4Gamers Dashboard.
      Note: Drive is Unlocked and will need a modchip or Tsop to use.

      Please Message me for Inquires
      N163LPH03N1X

       
    • By JBWASHERE
      Hi all

       
      I am a new member, so am not sure if this posting is in the correct place, but any help would be really appreciated.


       
      I bought a modded Xbox with XBMC/Coinops4 on it about 6-7 years ago and then stored it away without really trying it out. In all there are about 5,000 emulated arcade and console games present.


       
      I recently decided to start looking at it properly, and so far it seems to be working fine (on a HD ready LCD) except for the following issues/queries. Although not a technical person I have spent the last 2-3 weeks scouring the internet for information/answers to the below, but have not been able resolve/clarify them. 


       
      1) None of the NES games work, even though all their ROMS are present a folder named "F:\Emulation\Coinop4\Romsconsoles".


       
      e.g. The ABADOX.NES Rom is located in "F:\Emulation\Coinop4\Romsconsoles\NES_Abadox.zip".
      But whenever I try and run this game I get message "Error Opening D:\Romsconsoles\NES\NES_Abadox.zip ... No such file or directory  PRESS B"


       
      On reading this error message I appreciate that when selecting a NES game, the system appears to be looking in the wrong directory but how do I fix it ?


       
      2) After much internet searching I found out how to enable the 480p/720p settings by changing PAL to NSTC (and using component cables). On the 720p setting, the XMBC dashboard writing looks far clearer than it did when running in the default PAL 576i setting.
      However although all the emulated console/arcade games still look OK, they do not appear to be any sharper/clearer than when using the original PAL setting or when I just use just the 480p setting or even when I simply use a RGB cable. Am I missing something or does the 720p setting only apply to the dashboard and not the actual emulated arcade/console games? This question has really perplexed me !


       
      3) When running an Amiga game the system usually asks me to load a floppy disc. The Coinops Instruction Manual says that you should press the START button. However this does not work. Any ideas what I should do ? The same issue is also present for some X68000 games.

       
      Thanks in advance for any help/guidance.
      John B

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.