Jump to content
Sign in to follow this  

Snes9x Emulator Started Lagging Recently

Recommended Posts

Hey y’all,

I have softmodded og Xbox for 3 months ago and up untill today snes emulation was fine (nba jam, contra etc..) Today when I was playing contra iii the sound started lagging noticably -also the music and sounds scatter a bit or play twice instead of once. I tried rebooting and removing and replacing the rom. Didn’t work?

Does anyone know what the cause of this problem is? is it fixable?

thank you so much if you’re willing to help.

Share this post

Link to post
Share on other sites

I don't think it's a overheating problem because if it get to hot the would Xbox shut down.

What hard drive has it got because that's what I would be checking 1st either the software  files corrupt or the drive is failing.

Try reinstalling the dash your using is something else you could try.



SS Dave

Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By AljeljaTheHakenzi
      Hello,i know that i am boring with these questions but i dont know anything about og xbox softmodding.Anyways,i am trying to softmod xbox with ide to sata adapter.I tried different methods but it was just failure.Then i realized that my drive was locked.I tried 3 methods for hot swaping so far and none of those methods work.I have msi a320m-pro with amd athlon 240 ge.My xbox is 1.6 revision with 10gb segate drive ST310014ACE.I also tried using xboxhdm,burned the cd,puted it in the dvd drive,but when i went to type xbrowse it said cd couldnt be found.Xbox hdd shows in windows disk management as non initialized.
    • By AljeljaTheHakenzi
      Hello!I am trying to softmod my original xbox.I tried to do it using this clip:Please login or register to see this link.
      I did everything in the video correctly.So the problem is:I dont have ide ports on my motherboard so i tried using ide to sata adapter and when i plug it in my pc and turn it on,it shows in disk management as not initalized,but when i tried to use xplorer 360 it says could not find fatx drive.I tried with 2 hot swap techincs,setting compatibility to win xp sp3,running it as administrator,tried different programs.But nothing works.I dont have xbox friendly usb drive and i also dont have any game that has save game exploits.Sorry for bad english.
    • By DobaMuffin
      I am writing this today to see about getting some help with my 1.6 Xbox and the Xeceuter 2.6 CE installed in it. I recently did this Please login or register to see this link. involving a resistor to extend the life of the board and the board works fine after the install.
      This is also where I managed to find an issue. With the mod chip enabled, both banks load up their respective bioses, but when I disable the mod chip using the front panel switch, the console Frags after 3 tries. When I disconnect the LFrame wire from the mod chip, the console boots up like normal to the stock dash using the stock bios. Before the mod though, disabling the mod chip using the front panel switch worked liked normal.
      So now I am a point where I made a modification to extend the life of the console, but lost some functionality in my mod chip at the same time. I am wondering if anybody knows what would cause the issue I described and if anybody else has ever run into similar issues. Though I know most don't tend to mod 1.6 consoles if the can avoid it.
      I'm also curious if anybody else happens to have an Xbox motherboard that is warped around the CPU and GPU area. By warped, I mean that I can see a curve in the motherboard around that area.

Board Life Status

Board startup date: April 23, 2017 12:45:48
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.