Jump to content
bluemeanie23

XErc2xe Modchip Pcb Copy

Recommended Posts

On 11/2/2019 at 11:36 AM, bluemeanie23 said:

Please login or register to see this link.

 

Enjoy 

There's no firmware source code inside.

All I see is a link to XERC2 firmware, no XERC 2 XE.  

Aren't they a bit different?

There were a few other versions XERC 2 Original, ?? XERC 2 ??,  XERC 2 SE along with several XERC CME / CME SE (Case Modder's Editions) C5, C6 and C7.  The code for all these versions well at least the CME/CME SE versions have to be different but can only find the Please login or register to see this link. .

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Pasimys
      Hello,
      i change my hdd drive to bigger 1tb drive and after succesful cloning i tried to format the new drive with XBpartitioner 1.3 and it complained about "LBA48 info not found! etc..(pic bellow) i tried to flash new bios with hexen 2018 but then that complained about "flash not writeable". i wonderd that do i need to get somewhere the newest bios and put it directly to my modchip via usb cable. our am i missing some step in this setup?  
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By NeMesiS
      When I first thought about doing this I never expected it would come together...
      None of this would have been possible without Ryzee119's work on the CPLD firmware!
      For more details please visit my Main thread over at EmuXtras:
      Please login or register to see this link. Please login or register to see this link.

      Quick demonstration of adding bios from a USB device, dimming feature and full RGB front panel and controller ports.
      NOTE: Due to poor lighting it is difficult to distinguish between some colors: "Green and Amber", "Cyan and White"...

      Sales/Pre-Orders
      Payments made through PayPal...
      Standard Xenium Bundle: $60 AUD + Shipping      ($40 USD / €37 EUR *approx.)
      Premium Xenium Bundle: $80 AUD + Shipping      ($54 USD / €49 EUR *approx.)
      Massive Xenium Bundle: $100 AUD + Shipping      ($86 USD / €62 EUR *approx.)
      * Prices may vary depending on international exchange rates.
      For sales and general inquiries you can contact me via,
      Email: XeniumMods@gmail.com
      Discord: Please login or register to see this link.

      Shipping
      Local postage within "Australia":
      Standard Postage = $8.95 AUD
      Express Postage = $11.95 AUD

      International shipping from "Australia" available!
      Shipping to the USA\Canada:
      Standard Shipping = $24.00 AUD
      Express Shipping = $39.00 AUD

      Known Issues
      Links to Ryzee119's GitHub in regards to known issues...
      Please login or register to see this link.
      Please login or register to see this link.

      Guides/Manuals
      Below are a collection of links that I thought are still relevant for various installations,
      The "Quick Solder Install Manual" is included even though I wouldn't recommend it.
      Would like to create some new manuals particularly for the RGB and LPC mods...
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.

      Availability
      Bundle Availability:
      Standalone Bundle = 16 sets
      Premium Bundle = 15 sets - 2 sold
      Massive Bundle = 14 sets - 4 sold

      Mod-Chip Color Availability:
      Blue Mod-Chip = 25 pieces - 3 sold
      Black Mod-Chip = 10 pieces - 2 sold
      White Mod-Chip = 10 pieces - 1 sold

      Xenium Bundles
      The below bundles include everything one would need for a complete installation,
      A basic 30 to 40 watt soldering iron should be more than enough for the job.
      The RGB controller ports require some cutting, I would really recommend a cheap
      Dremel knock off from your local hardware store with a cutting wheel/blade...

      Standalone Xenium Bundle

      1x Xenium ClassicICE Modchip (Blue, Black or White)
      1x 2x6pin Male Pin Header
      2x SH 2pin 100mm "DIY" Cables
      1x XeniumUSB Adapter (Blue Only)
      1x XeniumLPC, either for v1.0-1.5 or v1.6 (Green Only)
      1x Complementary "Xenium" Sticker

      Premium Xenium Bundle

      1x Xenium ClassicICE Modchip (Blue, Black or White)
      1x 2x6pin Male Pin Header
      2x SH 2pin 100mm "DIY" Cables
      1x XeniumRGB Front Panel (Blue Only)
      1x SH 10pin 300mm Cable (White Only)
      1x SH 6pin to PHD 2x10pin Cable
      1x XeniumUSB Adapter (Blue Only)
      1x XeniumLPC, either for v1.0-1.5 or v1.6 (Green Only)
      1x Complementary "Xenium" Sticker

      Massive Xenium Bundle

      1x Xenium ClassicICE Modchip (Blue, Black or White)
      1x 2x6pin Male Pin Header
      2x SH 2pin 100mm "DIY" Cables
      1x XeniumRGB Front Panel (Blue Only)
      1x SH 10pin 300mm Cable (White Only)
      1x SH 6pin to PHD 2x10pin Cable
      2x XeniumRGB Controller Ports (Blue Only)
      2x SH 4pin 100mm "DIY" Cables
      2x 150mm Lengths of Kynar Wire
      2x XeniumUSB Adapters (Blue Only)
      2x XeniumLPC, both for v1.0-1.5 and v1.6 (Green Only)
      2x Complementary "Xenium" Stickers

      Accessories
      XeniumRGB
      Is a set of modules for RGB lighting with the aim for an easy install which should look like the above demonstration. The front panel also acts as a breakout board for the RGB ports and other mods, the RGB controller port modules are design to be directly soldered to the shielding.
      RGB Front Panel (Front)

      RGB Controller Ports (Pair)


      XeniumUSB
      A cable-less alternative way to convert a xbox port to USB which will be a standard inclusion with the modchip.


      XeniumLPC
      Are a pair of modules to aid with the installation of the modchip, also a standard inclusion.
      LPC for Xbox versions 1.0-1.5 (Left), Rebuild LPC for Xbox version 1.6 (Right)


      Original Comparison


    • By Swirlygiver
      Is there a way, to copy files from one Xbox to another, without the need to FTP?  Seems to me like I’ve done it in XBMC before, bu I don’t remember. 

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.