Jump to content
Sign in to follow this  

128mb Ram Upgrade

Recommended Posts

@TwiSteR located in the U.S

La Puente, CA to be exact

@Xbmcmodsforxbox yes but only of my personal 1.0 system, all others go out the door once i finish so i havent really bothered with pictures

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

Edited by suwuj12

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By the415giant
      I have a v1.0 original modded Xbox, it had an old Aladdin mod chip, I wanted to upgrade the hard drive and after doing some research I found out I can brick it by flashing a new bios. The bios is unknown but after running bios checker it reads I have a lpc sst49lf020, it boots up xecuter2 into an evolution x dashboard. If I use the hexen 2019 disc, what steps can I take after I install a larger hdd? I don’t need to clone it, I backed up everything using ftp, and I want a fresh install. Here are some images that may help...
      Thanks for your time. 
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By Kura
      Hi all, I have an issue with my XBOX that doesn't power on anymore.
      Model: 1.2
      TSOP: Yes, iND-2003
      Mods: None other than removal of the clock capacitor
      Misc: Using the Chimeric Systems HDMI adapter (which is awesome)
      Yesterday I received a new modchip from eBay, the Xenium Gold with the 24K OS on it.  I swapped out my old Aladdin chip and fired it up with no issues.  I proceeded to add EvoxM8+, iND-2004, and XBlast on it.  I tested all 3 BIOS and they all worked fine.  From here I decided to do the 128mb RAM upgrade.  I've successfully performed this upgrade once before.  I'm using the same RAM that I purchased from eBay over a year ago that worked on my previous install on my other 1.3 XBOX: SAMSUNG 525 K4D263238F-QC50
      I proceeded to solder in all the chips, but when I went to turn on the XBOX nothing happened.  No light, no response, nothing.  I don't ever recall hearing a pop or a snap.  I double checked that I connected everything.
      - I thought it might be the PSU so I swapped in the working PSU from the 1.3 XBOX that I successfully did the RAM upgrade on and the same results.
      - The only thing I noticed was that when I pressed eject or power on either PSU, the Xenium chip LED lit up.  If I held either button the LED just flashed.  Other than that, no activity from the board whatsoever
      - One thing I noticed is that I soldered the final chip in backwards (chip 4 according to the XBlast diagram, the one closest to the ATX plug).  I should have taken a break after 2 chips due to fatigue but I pushed through and I guess I wasn't paying attention.  I used my hot rework station to pull the chip off and turn it around.  Same results.
      - After this I decided to just pull the other 3 chips off to troubleshoot it from scratch, but no joy.
      - The repairs for power buttons I've seen after searching are mostly just the trace repairs on the 1.0/1.1.  I'm not great at troubleshooting so I wouldn't know where to begin without a guide on the 1.2 XBOX.
      Did I fry the board somehow?  Did putting the RAM in backwards just kill it?  Did I ESD shock it?   Did I get the iron next to something that I shouldn't have for too long and didn't notice?  Here's some pics I uploaded to imgur since they're too big.  I can take more photos or better photos of certain things if needed.   Thanks in advance.

      Please login or register to see this link.

Board Life Status

Board startup date: April 23, 2017 12:45:48
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.