Search the Community
Showing results for tags 'turn'.
Found 6 results
Hi people, i bought an softmoded OG Xbox a couple of months ago with an 80GB Ide hard drive. I wasn't able to use it because i needed to get an Voltage converter (v220 to v110, 300W) and i wasn't able to test it untill now. During that time i replaced the thermal paste following some tutorials and cleaned the upper case. Now that i have the converter the console won't turn on. It doesn't make any noise. I checked the capacitors and all of them seem to be alright (Flat on the top and no leaking) and i tried with a different power cable and nothing. Thanks for your time. Here are some pics of the console. https://imgur.com/a/3XkDNpe https://imgur.com/a/h9GBXQS
My OG xbox wont turn on. Not a single bulging or leaky cap. I was going to replace all the caps but I noticed this and I dont know what it is, how to tell if its bad or how to order a new one. It looks kinda burned on the top but it just appears to be the rubber and not the part itself. is there a way to check it with a multi meter. The part I am asking about is the one in the first picture
Hi guys, So I've got a problem just like the title says my Xbox is being weird and not turning off. I've opened it up, removed the clock cap and cleaned up the very minimal corrosion that I could find and gave it a good scrubbing with a soft toothbrush and isopropyl, I've inspected the traces, poked around with my multimeter and have continuity happening and can't see any damage at all even under a magnifier. But I'm getting some odd symptoms that I've read about where I can't turn it off and it opens the dvd drive. Now the reason I find this weird is that it doesn't happen all the time, from a cold boot it's totally fine, but I lose the ability to turn it off only after the xbox has been on for about 30 minutes. Wondering if you guys can think of any other things that could be the problem? Thanks!
Hi All, First, my English is khm khm not too good, but I try to explain what is the case. So, I have an Xbox Classic 1.0 which is always turn on when I connect the power cable. It is the first problem, but I can live with it (but if you have an idea why, I will say a big thanks for the answer). Okay, I soldered an Aladdin XT Plus2 in it. It works well, but somehow, the Xbox turned off itself after some minutes. I checked the processors and its cooler and the processor wasn't too hot and cooler worked well. I try to find some other problem, like capacitors or wrong traces but I do not found anything. Anyone has a good idea what can I do with it? :) I'm near to kick out it from window ;) Thank you in advance! BR: Zsolt
Hello, I've got an xbox to which I've performed the trace corrosion repair on the past, as the buttons did not shut down the console properly (it only turned on after i applied power to the unit). I've ran it just with the power button working, until now, when I decided to go ahead and try to fix both buttons. But now it went bad or something, because no matter how hard I jump wires to traces A, B and D (C is fine on my board, and I can't find E) as shown on this thread, the console simply refuses to turn on anymore.the wires are just fine and they give me continuity when soldered, but that's that. I know for sure that the power supply is perfectly fine (it never really failed). Even with only traces A and B soldered properly I can't get the console to boot anymore, and the right hand side of C7P8 has continunity to the solder pad in trace D (just saying because i'm not sure if this is how it should be, I hope nothing shorted ). Is there any other way to wire the power to the board so it'll work again? It would be really bad to have to throw it away over something like this.... I really hope someone can help me. Thanks in advance.
Hello everyone, I recently bought an Xbox and on the first day I turned it on and it booted up fine. Days later I am now trying to turn it on again and nothing. No lights, no sounds. I have another Xbox and the cable works fine. What do I need to do to fix this issue!
Board Life Status
Board startup date: April 23, 2017 12:45:48