Search the Community
Showing results for tags 'how'.
-
i had been using the modified m8 evo(i think that's what it is called) bios because there is just something about seeing that stock boot image that i love. i don't know how to describe it but, it just does something to me. i recently started using cerbios because i wanted to take full advantage of my 3tb drive. so how can i make cerbios have the stock boot flubber and sound? -
Im running a modox pico with prometheos + cerbios + analog to hdmi from electron shepherd. I want to force all video to 480p including the tsop original dash. Any easy way?
-
Someone gave me an Xbox with an Xecuter2 modchip and the Avalaunch dashboard. It uses Px HD Loader for playing games. I searched around and couldn`t find how to get my iso's / xiso's working (converted) for use with Px HD Loader. The DVD drive isn`t working and the only option in the dashboard seems to be loading / converting from CD / DVD. The Xbox contains and 200GB IDE drive, so I can`t hook it up to my PC, wipe the stuff with Fatxplorer and start over. Any suggestions how to convert? Then I can upload my xiso's through FTP and then convert them on the Xbox.
-
I hit the right thumbstick and it pulls up a menu that says "Exit game" but once you hit that option there's nothing to go directly back to Emustation; but only to restart the Xbox back to the dashboard. Am I missing something? -
Hello together Hope to get some help signed up espacially for this issue I have a xbox version 1.3 with error code 16, so i bought a modchip while booting top left in the screen there is a „x“ Symbol. modchip is a Duo x 2 Problem is After this screen there is again an error 16 Message. Below the the cable i have soldered, d0 has already been corrected with a thinner wire. Backround to the console, i had done a tsop before and changed the hdd. Big Problem i don‘t know where the „new“ hdd is located. So i only have the original hdd onhand. Also some of the traces had corrisions, that is the reason of the additional wires. I‘m also sorry for my english as i‘m originaly living in Germany hope i explained it good enough that you Can understand my Problem
-
Hi, i just bought an aladdin chip from amazon and i've sucsessfully installed it on my xbox, but i want to change the original flubber logo and the xbox logo, can i do it with my aladdin chip? thanks my xbox is an 1.6 version
-
I'd like to replace the logo that appears between the Xbox flubber animation upon startup and the loaded dashboard on a soft modded xbox using UnleashX. Right now its an X inside a cube with some matrix test in the background. Is that possible and how would I go about doing it? I am using the default skin and I don't see anything in the E:\UDATA\9e115330\0064122817A8\ directory labeled Skin. I do see a UX Splash but I changed that to no avail Ive tried googling around but I think im missing the right keywords so I wanted to create a thread if anyone knew how. -
i have resoldered, amtech fluxed, and solder wicked the lpc ports several times over 2 days and there are a few holes that just will not come clean. i was running my iron on 490 but turned it down to 395. i'm afraid i will burn a trace up or knock one of those tiny resistors close to the port off if i keep trying. i have installed modchips twice before but, that was a 1.4 and 1.6 xbox. both already had the holes clean. this is my first 1.1v to mod and it had the filled in holes. so, how do i get the stubborn ones clean without damaging the board? please help.
-
hey folks! it's been a long time. anyway, i haven't touched any of my og xboxs in over a year. i decided to get a hard modded one out lastnight to test some things and i went ahead and updated xbmc4gamers and everything. i also installed the newest artwork pack from the downloads section, went to where it downloaded at and ran the .xbe, but no artwork is showing. what am i missing here? seems like there was something i had to do last time to activate it after installation but, i don't remember what that was.
-
diagnol issues any better? -
So i booted my old Xbox OG and it boots with AV and startup logo and gives me error 07. You also hear the HDD clicking and assume that the HDD has given up. I searched a couple of topic's how to get a new HDD working and i am not sure how to do it with the Aladdin modchip. So the Aladdin boots in 2 states (short power btn press) green logo normal boot and (long power btn press) Aladdin boot red logo. I read that installing a new HDD requires EEPROM that is needed for the new HDD to be able to recognizable for the Xbox. Retrieving could be done with a RaspBerry Pi, that i have. Not sure if the Aladdin modchip makes it easier to retrieve the EEPROM, also saw that some people boot HeXen is that maybe a possibility? Don't really need the normal boot, the Aladdin boot would be enough as long it can start the games and maybe FTP file transfer. If someone could point me in a direction which option might be best i can search how to do it. Sorry for my noob question.
-
I'm trying to learn this dash, and watched the old youtube tutorials by Team Kodi, but can't figure it out, they use SMB instead of the xbox hdd. I installed Red Vs Blue S01E01 and Game of Thrones S01E01, but neither show up in TV Shows. I downsampled both with ffmpeg, and they play great when manually selected in File Manager. This is what my folders look like. When adding the TV Shows source folder, I selected TV Shows, and a tv show scrubber populated, so I feel that part is correct. I'd like to not have to rely on the database scrubbing, and just manually install all that stuff, if possible. If the xbox ever loses internet, I want it to be the same experience with full synopsis and thumbnails.
-
I've been working on an xbox maintenance installer in my language (italian) for a couple of years now and to improve it i'd like to make uleashx xbe files read specific xml configuration files instead of the classic config.xml (like in the Cerbios disc, like on Hexen and like on Rocky5's softmodding tool). I've searched a lot online but i couldn't find any information about it. does anyone know how to make this possible? thanks a lot to whoever can help me
-
Hello. I use XBMC4games on my stellar modded xbox. It is useful . I downloaded trainers. After updating trainer list, I set trainer on trainer settings. the thumbnail on games logo is yellow. the trainer isnt activated on game. this code is correct for my game, I think. Please give me a suggestion.
-
Hey there, I have an Xbox rev 1.0. With a cheapmod based modchip (SST49LF020), with BIOS Evo.XD6 EjectFix. I want to replace the current 120GB HDD with a bigger one. But the issue is that, I'm not able to flash with another custom BIOS.
-
Is it possible to have XeniumRGB and a SPI2Par installed at the same time with OpenXenium; there's only one JST port on the chip.
-
Many years ago, I'd snapped off a dip switch on my X3 mod, now I'm stuck as 1mb bioses that I can select from the bank selection. As you can see bank 4 is broken, I've tried moving it with a sharp knife but I can't get it across. Therefore I can only boot with 1mb bioses, in the position I'm in now is the only one my Xbox fires up, all other banks are empty, I flashed Cbios to the main bank which I assume is bank 1 with the 256mb bios seeing it was an empty bank and it doesn't work, just makes the Xbox not power on, however if I go into the X3's live menu system holding my white button down and boot it as a 256k bank cerbios works, I just can't select it from the dip switches so it sounds like my ideal solution would be a 1mb Cerbios so I can flash it to the main bank. I'm very limited as to my dip switches positions with dip switch 4 stuck to off, I can't use a 256kb bios. "256k Bank Bank 1: on on on on Bank 2: off on on on Bank 3: on off on on Bank 4: off off on on Bank 5: on on off on Bank 6: off on off on Bank 7: on off off on Bank 8: off off off on 512k Bank Bank 12: on on on off Bank 34: off on on off Bank 56: on off on off Bank 78: off off on off 1MB Bank Bank 1234: on on off off (Set to this when flashing first time with FlashBIOS) Bank 5678: off on off off 2MB Bank Bank 12345678: off off off off"
-
Is there an official tool to convert bin/cue xbox images to iso? I tried renaming a bin file to iso, and it worked, Mulleter even loads the iso as a disc with no errors. Just wondering if this method works, what do I do with the cue file, they're all only 1KB. The game plays fine when renamed. Would there be any consequences when renaming instead of converting? I just tried ISObuster 5.4.1, but it produced a file with the exact same size and hash as renaming, is this even needed?
-
FIXED SEE BOTTOM OF POST Hi peeps, I have just added a blue LED halo to my Xenium modded crystal. Its looks great, the ONLY issue is that its a bit too bright... Its a 12v halo for car headlights. Here's the link to the exact one I bought. https://www.amazon.co.uk/dp/B07G59CHT3?psc=1&ref=ppx_yo2ov_dt_b_product_details Here is what it currently looks like on my console.... And the view from above.... Its so bright that it leaves rings in your vision for a good 10 mins if you look at the console LOL I'm thinking that I should be able to add a resistor or similar to reduce the voltage a bit. It does have a little box half way along the wires which I think is to help with fluctuating voltage on a car. See pic below FIXED with the below.... https://www.amazon.co.uk/dp/B01MFH9J2D?psc=1&ref=ppx_yo2ov_dt_b_product_details Can be dimmed right down, made bright as fuck or set to epilepsy mode -
https://cyrix.ca/n-comm-w-modern-controller-on-ogxbox Went through the effort of testing this out as I know there are plenty of people wanting to play on Insignia, want to use a modern controller, but also want to be able to use in-game chat. This setup works and should give people a guide on how to get their own setup going. -
I've been scratching my head at this for a few days trying to get this to work with no avail. I've been using this library https://github.com/brentdc-nz/libSDL2x/tree/master but it's not very complete, so I tried using Lantus's libSDLx library (SDL 1.2) and I couldn't get it to set up properly. I'm on physical hardware running Windows XP Professional SP3 32-bit. libSDL2x wouldn't work because it would break at SDL_RenderPresent() and spit out an error about memory allocation?
-
i have a bunch of old videos on my xbox i want on my computer, but i don't know how to do it.. do i have to record it through a capture card or is it possible to take the hard-drive out and get the videos
-
Hey guys so anyways, I was wondering about installing sdl for the Microsoft xdk for the original Xbox that lantus made back in the day, and also is it included in the vm that was included with the easy xdk installer?
-
I have 2 XBOXes v1.2 and v1.6 with Rocky5 softmod v1.1.6. I was messing around with the NKPatcher and nulled the HDD drive key on one of them before backing up the EEPROM and now it boots up to error 05. It seems I need to format it using the hotswap method, xboxhdm v1.9 and a backup of the Dashboard from the C partition, which I don't have. Can I use the files from the other XBOX? EDIT: I'm probably looking at it fro the wrong angle... when using the hotswap, won't I get access to the backed up EEPROM in the E partition? Can it be used to restore the HDD?Or is it better to just format it and start from scratch? This subject is still pretty new to me.
-
Fuck the wires and shrinkwrap. That's retarded. I wire up the negative so I can anchor the LED in place with the resistor. MUCH easier to anchor from one hard point instead of between two hard points. I make sure it all fits under and within the metal shielding.
- 11 replies
-
- 2
-
-
- how
- controller
- (and 3 more)
.thumb.png.f42da7287d0f269627e60f69c2f54ecc.png)
Board Life Status
Board startup date: April 23, 2017 12:45:48