Search the Community

Can anyone tell me which file which is inside the .XZP loads the Xbox HL2 menu?

Got an v1.6 softmodded xbox (with non ejecting dvd drive) that i thought I could turn into a devkit system. Using MVG's 2018 Youtube video. But all i got was a bricked xbox. When i was supposed to start the pbl from the E: the xbox froze. And after a restart the xbox error 21 was present. I then fixed the drive belt on my dvd drive, so i now can eject and insert dvd's but no luck starting slayers-evox or any of my original xbox game. I didnt backup up the eeprom files. On the E: drive there was already present some similar PBL files - so i copied these to my pc before overwriting with MVG ones : ( boot.cfg, M8_LBA48_IGR_Q-06-BFM.bin, xbdm.dll, default.xbe (21kb), dashboard.xbx ) Is there a way to make this xbox come back alive ?

In theory it is possible that the OG Xbox supports more than 128MB of RAM ? As for example 4 chips of 500 MB would already be a total of 2GB of RAM

tomorrow I will install the ogxbox installer and everything is new to me about og xbox and I don't know what applications are cool and what they can be useful to me

XBOX 1.4 board, ST bios chip. Bridged the usual two points. HDD was dead, so installed Jafar chip and tried to lock another HDD but failed. So booted IND bios from Jafar, run Hexen 2021 and tried to flash onboard bios. It seemed to work but when rebooted the console it still had the stock bios. Tried another HDD which managed to lock to the board using Xblast by booting from Jafar, booted Hexen disc from the soft modded HDD and tried to flash bios but gets stuck trying to erase the bios and nothing happens. Rebooted, then ran xblast OS from the hexen disc and tried Net Flash but again gets stuck. Redid the two boints on the board and re-checked, they're defenitly bridged. At this point I'm at a loss to why it won't flash the bios. Board has some signs of corresion.

1. Can the metal parts be separated from the housing without damaging the metal parts? and metal parts will not rust, but I want to clean the top case 2.With that said, what's a good technique for THIS case Crystal cleaning? 3.the casing is not yellow, but i want to clean it once and for all Anyone care to share their experience? p.s sorry, i don't speak english, just that is what google translate says

It would appear that the power supply I have in my "project" xbox is faulty. Tested with another psu from my other xbox, and it works, so definetly the supply. Anyone got one they would be willing to part with at a reasonable cost? In Australia preferably (220v) Cheers

I bought my first Xbox classic with modchip (aladdin xt plus2) and the problem is that the hard disk is dead and I listened to it I have to have eeprom but I do not have because the hard disk is dead but I also listened that I can change the hard disk but I have to do haxen board and reinstall the system? this is? ps (I'm sorry but I can't speak English, this is what Google translator says)

Hello All, Recently started to collect OG Xbox games and consoles, and I've come across something interesting, to which no one seems to know the answer. I bought a couple of factory sealed copies of Madden 05 recently on eBay, and noticed something odd about one of the cases... the outer portion where you open the case has two brackets near the center (see images via the links below). Every other game I've picked up at local gaming shops, or online via eBay have not had this case design. The color of case looks spot on relative to the rest of my games, and everything else looks authentic, and the game is in new condition and plays perfectly. It even had the official seal and legit factory plastic around the case. Has anyone ever come across these case styles? Are they OEM? Worried that I got scammed a bit... though, the games weren't overly expensive to begin with. I've kept a couple sealed, but I can feel that none of the others have this bracket. https://ibb.co/6nTgcPR https://ibb.co/ydMVDWj https://ibb.co/9pwFyzg Any thoughts?

original xbox is 1080i or 1080p? because I've already tested photos in 1080p and used it as a screen saver until today, I've also tested 1080p video in .xmv format and opened it without crashing, apart from that when the 1080i resolution is activated it doesn't appear to be Interlaced and yes Progressive

Hi, I'm trying to repair my xbox v1.6 with a Delta 220v PSU because it doesn't power on at all(even the fan isn't spinning). Backstory: the xbox stopped working all of a sudden(it worked just the day before even with the leaked/bulging caps), so thinking that maybe the power and eject buttons got broken, I tried to turn it on by shorting the SW1 Eject or SW2 Power(I can't remember which) to GND according to this diagram of the front panel connector. I don't think this was a good idea since the xbox didn't turn on and I heard a small spark but I'm not totally sure. Now from the PSU, not plugged into the motherboard(so in stand-by I guess), I get a ~5v reading from the orange wires but 0.1v from the blue wire(which should be 3.3v even on stand-by according to this table) and ~0 volts from the other 3.3v and 12v rail as it should be. Moving on to the motherboard, after removing all the bad capacitors, I still get a short between the 5v rail and ground(measuring the pins of psu connector on the motherboard). I also tried measuring the caps under the CPU(starting from C2P1 to C2P17) and they're all shorted to ground. The caps C2E2 and C1E1 too. Also, measuring the VRM(?) FAN5059M I'm getting a short on the pins(apart from GND) 2_SW, 6_VID2, 8_VID0, 20_VFP. All this leds me to believe that the CPU is fried but I can't really wrap my head around how I could have done that, is there something I'm missing/misunderstanding? Image 1 mobo Image 2 mobo Image 3 cpu caps

Hey everyone im putting together my own original xbox website please go sign up in the fourms and enjoy the site everyone this will be getting updated alot so if something does not work right its getting fixed well here is my site https://sites.google.com/view/xbox-database-hq/home?authuser=3

photo 01 photo 02 photo 03 photo 04 photo 05 provides more power and memory for: - removing slowdowns in emulators - hex patches for 720p output resolution - improved dashboard performance on 720p resolution - improved Linux performance 2TB HDD storage: - new unit installed Xerc2: - makes your Xbox turn ON and OFF from a remote (some TV remotes or Xbox DVD remote) - IR receiver was installed on the left bottom side of the front panel (requires some tweaks to work with your remote) OGX360: - lets you connect wireless Xbox 360 controllers to Xbox Original - installed internally (can be turned ON and OFF by clicking the button on left bottom side of the front panel) - 2 channels soldered and programmed (controller port 1 and 2) - OGX360 USB is located on the back of the console Others: - has 2 options, one for stock Xbox speed, and another one for 1067mhz this way you can play stock Xbox games without troubles and glitches, and also play Emulators in fullspeed - painted blue (automotive paint then clear coat) Listing contains: 1 x Xbox console (with 1ghz CPU, 128mb RAM, 2TB HDD, XERC2 and OGX360) 1 x Wireless Xbox 360 controller 1 x Wireless Xbox 360 receiver for PC 1 x Power Cord (USA or European depending on your location, same for Power Supply, if you are from USA it will be 110v, if from Europe - 220v) 1 x Xbox2HDMI

There's a few games not working on faster cpu. Does anyone know how to get Return to Castle Wolfenstein (NTSC) to run with a faster cpu ? (1 ghz, 1.4 ghz) ? On startup it dIsplays the first copyright screen and then it freezes just before loading the ESRB notice. HDD spins down to low activity. Same result happens if I use xbepatcher on the default.xbe. On my stock xbox this game runs just fine.

Hello Guys. I need some advice. I have a Xbox 1.4 with a windbond chip that I TSOPed a few years ago using a Hexen disk, I don't remember exactly the bios that was flashed, but when I turn on the xbox the evoX logo comes up, so I'm gonna guess my xbox has a m8 plus. The console works fine, but the fan is very noisy (it's a Sunon), so today I disassembled the xbox, replaced the thermal paste in both gpu and cpu (i've gained like 5 degrees), cleaned and oiled the fan and...it's still very very noisy and loud. So, I've been looking for a replacement fan, and found that people recommend the "Nexus 70mm Real Silent Case Fan". But, they also recommend to up the fan speed (to 40% I think) because by default, it won't cool the console as the stock fan does. To do that, ¿I should flash a new Bios right? the m8 plus using EVtools and selecting 40% fan speed? something like this: My DVD drive is dead, so I can't use Hexen, or the OGXBOX Installer, but I can FTP to the console. Any advice on flashing a windbond chip? Thank you so much for your time.

So I have a question....and it may sound dumb but ill explain and hopefully one of you wonderful lads and gents will have the answer I need.... I had two 1tb 3.5 hdds one got locked to a burned out mobo on a 1.2 xbox... 1.can I format that drive without the hdd key? 2.I don't want the data off of it just want to wipe it. 3.Its a WD Blue series hdd. Hopefully someone can relay some info on this... [Mods feel free to put this in the right forum topic as I wasn't sure where this should go]

Hi guys i heard we can extract xbox eeprom with esp8266. i searched the internet but could not find any reliable guide. i only found a youtube video where the guy is speaking in french so i don't understand him. can anyone please help. my xbox is revision 1.2 and i already have removed the clock capacitor. i also have attached the picture of the esp8266 board i have.

Hi everyone, new to the forum but looks like it's the right place for me to visit. I have an Xbox 1.6b (2005, Australian 240V model). Tonight it wouldn't fire up at all, completely dead and unresponsive to the power button. I opened it up and there was no obvious damage on the mobo. All i could measure on the 20 pin molex from the psu were some very low voltage (0.6V) on the 5V pins. 12V was reading 0. Ac input fuses showed good continuity. The only thing that looks suspect on the psu is the component in R10. I measured across the pins for R10 and its reading open circuit. I reflowed the solder on the AC input pins, no change. The xbox has been moldded since purchase but has been working perfectly until tonight. Nothing has been changed in the last 15 years. Still in original case. The original power cable seems to be intermittent now but other cables tried and no change. Any suggestions to help diagnose would be appreciated as I couldn't t find any replacement psu online anymore. OG psu is Tuscany rev 1.0. Tyia, tssfka

Bought of ebay with error 7 (faulty HDD). Installed Jafar modchip, connected unlocked HDD and locked to it, boots into xdash from previous install with soft mod. Soldered both points on board and even tested with multimeter which confirmed bridged, load up hexen and choose tstop winbond, loads Gentoox and selected HDD flash, soon I hit flash bios console turns off and reboot! Any idea to what's wrong here?

Anyone have a top and dvd bezel for a Halo Edition Console let me know. Need 1 to complete a set.

Hello guys, I've tried to search for that kind topic, but did not find any similar. As I recently got my og xbox (already modded), I am not very familiar with all the option of this mod. My main question is - Is it possible to change modded xbox dashboard skin to original green one (like from the factory)? But to keep all the modded xbox perks like 720p+ resolution, hdd saved games etc. Basically just change the look of dashboard, cuz i dont really like that modded look

Hey guys, Bought a second hand xbox that came hard modded with a sst 49lf020. Seems this xbox hasn't been used in a while as some of the apps are a couple of revisions behind. Should I wipe it clean and start again? Should I buy a different modchip? Attached an image below of the details from EvoX.

Hey guys, my softmodded 1.6 box with a SATA adapter in it is taking a while to boot up and I'm wondering if the drive is on its way out. I'd like to be able to clone the drive to a SATA SSD I have lying around but every drive cloning tutorial I see out there involves hotswapping an IDE drive. How would I accomplish this?

Hey, I have installed the chip successfully and flashed the M8plus16 bios to the 256k slot but my DVD drive is toast and wont read my setup dvd (I tried tweaking the pot in stages all the way down to 500 ohms but nothing). I have installed and formatted a new harddrive within Xblast but is there a way to install a dashboard without a dvd drive? Is there a Bios with a built in FTP server for example? Thanks!

I haven't really been able to find a ton of info on the communicator, I am curious about it though. It would be nice to have a way to hook up the Xbox to a modern gaming headset, through a combination of Toslink and an AUX jack maybe, ideally without having it plugged into the controller you're using. I'm assuming this is an analog/digital converter and that a simple AUX to USB adapter couldn't replace this thing.