Search the Community

Hello everybody! Does anyone have the pdf file for the manual for this ogxbox model or know where I can download it, I already searched on Google and couldn't find anything.

Sigh.... I feel like such a hypocrite... To be fair, I tried to order the HD+ only so I could use it with the stm32 module since I thought that would be another cool project to try. Apparently I also ordered a Stellar. I was like, ah CHRIST! Now I have to install it! So here goes. It's going in a 1.4 128MB Halo Edition console.

OGXBox Installer 2021 v1.9.3 Cerbios Edition (Refresh) Created by Sweetdarkdestiny Just "small" updated version of his Installer till 2.0.0. comes out. Changes: Fixed some small funny stuff. Changed the EvoX m8+ BFM bios to Cerbios 2.3.1 BFM bios. (This fixes the boot issue people have reported.) Added an option to flash the latest Cerbios v2.3.1 in various flavors. Updated to the latest XBMC4Gamers build. Updated to the latest XBMC-Emustation build. And with the 1.9.0 build: This will now boot without the use of a BFM bios (Like Slayers) and loads a mini boot menu. In there you have the options to launch the installer in various modes: Launch OGXBox Installer - DHCP & No BFM Bios Launch OGXBox Installer - DHCP & BFM Bios Launch OGXBox Installer - Static IP & No BFM Bios Launch OGXBox Installer - Static IP & BFM Bios With the 1.9.3 build: The disc will now be able to boot using the endgame exploit. Sweet tells me that there are some small updates to the build, so I have updated the link. Sweetdarkdestiny: "Some people seem to have problems with brand new HDDs which cause this installer sit on the doggy logo forever. To avoid the need of using anything else other as this disc you can boot now without the BFM and set up your HDD. You can also switch the mode at any time if you like. Please Take note that some options in the "No BFM" versions are slightly different. Not by much but you may see it if you used the old version. However, I hope this make some ppl happy." Bowlsnapper: Looks like Sweetdarkdestiny fixed the BFM Blank HDD issue. Thank you! ---------------------------------------------------------------------------------------------------------------------------- Folder Link for the download : https://1fichier.com/dir/oU8S1x1b Folder Link for the download of the Extras Disc's : Emulators v1.0.0 / Game DLCs v1.0.2 / GAME Wide+HDD Fixes+Updates v1.0.3 https://1fichier.com/dir/RTai0x0y ------------------------------------------------- Bowlsnapper: I hate fichier. There are a lot of limitations on how many things you can download and ads. So I hosted these on Mega. Installer Disc: https://mega.nz/file/Aj1SBRhS#PtY226v0PJdLfrrIZD8NDwsyXkhzKmw8K3pazlAJ9iw Extras Disc 1 - Emulators: https://mega.nz/file/53l21SxC#Sytcsk9sAAYyBZVUSDM3LN4i6vEVdP0YiOhoFOviDrE Extras Disc 2 - Game DLCs: https://mega.nz/file/o2Nh2LBQ#d6KMQEBzRU18HzdJM5gZYQB-ckrSnOvI78Cto-H_Q6c Extras Disc 3 - Widescreen Hacks, HDD fixes, Updates: https://mega.nz/file/UvFSyQLR#oMouAkyzzcje04XhQ-D9C-BAuooUg2KhVnqMqF3KPT8 ------------------------------------------------------------------------------------------------------------------------------- Credit for this installer goes to Sweetdarkdestiny. I do not take credit for this. Original Thread: https://www.xbox-scene.info/forums/topic/396-ogxbox-installer-2021-refresh/#comment-722

I have it on marketplace, but I wanted to put it here also. Includes some good music and a couple of interesting videos. I need to add the Halo 2 map pack, but otherwise it's pretty loaded.

Limited Edition Japanese “Skeleton” Xbox for sale! This is my whole collection I’ve been working on for 5 years. I have lost interest in it and it just sits around unused. I’d like it to go to someone who would actually enjoy it! Everything is tested and working except for the wireless controllers. I recently picked those up and have not tested them. It’s possible they work just fine. Minor cosmetic scuffs on everything but does not effect functionality. A cracks on the Xbox itself, mostly around where the case screws go. One of the corners does have damage. See pics. Asking for $650 or best offer shipped in the US. PayPal only. Let me know if you have any questions! What’s included: - Limited Edition Japanese “Skeleton” Xbox - 4 special edition controllers - 3 wireless controllers (untested) - Pound HDMI adapter - Madcatz HD component/composite cable - 3 controller extension cables - 1 controller port to usb female adapter - power cable Mods: - TSOP flashed 1.4v motherboard w/ EvoX bios - 128mb ram upgrade - Startech IDE to Sata adapter - 80 wire IDE cable - 1TB SSD drive - Insignia Live setup (account/gamertag will be included) - DVD drive delete - XBMC-Emustation Dashboard - RGB lights

Hey everyone! I have the following controllers for sale. All have been Cleaned & Tested. Paypal Goods & Services (I cover fees & shipping). Prices are negotiable & the controllers will be carefully packaged in a box with bubble wrap. Thank you! Halo Edition Controller #1: $80 Halo Edition Controller #2: $70 Blue Controller #1 (New Sticks): $30 Blue Controller #2 (New Sticks): $30 Green Controller (New Sticks): $30 Duke Controller #1: $25 Duke Controller #2: $25

This is my worklog. I'll post pics and thoughts! Why am I sharing this? Because I can! Modding the other 1.4 halo console tonight with an XBlast Lite from Tomcat. I don't have to share such a routine procedure, but I feel like doing so. I should celebrate: I will finally start receiving the income I've been waiting for and I'll have all the time I want to learn new skills and get better at the things I've always wanted to learn. I will also be able to invest in consoles and get a little bit of everything and try to get some broad experience with all there is available. Oh and I bought a shitload of pinnheaders. I can mod like, 60 Xboxes now. I'm unsure of what to do for sure with this console. I don't know whether to keep the chip in, or just use it to flash the TSOP so I can sell the console. But it will have another 2tb origins drive in it, just like my X3 does. I have some shit to buy... I'll start another thread about it. Anyway! Oh and I'll try to use this chip to revive my black coma console.

So I've been doing a bit of research to try and find out more about this OG Xbox Halo 2 Edition I have - it's a Ice Blue Halo 2 Release edition with the Black Xbox logo on the top "Black jewel" I beleive it's refered to. Some sites I have found (https://gamingdoc.org/) & (https://consolemods.org/) - list the serial numbers as both: 2NNNNNN 51805 , 2NNNNNN 50805 Are these internal board Serial Numbers? The xbox is still in it's plastic bag packaging so I'm not going to open it to check but on the stick externally - it has 4044117 51505 :SERIAL NO. & 241 4044117 51505 :PRODUCT ID Does anyone know anything more about this? Like can I confirm the unit I have is actually the Xbox Halo 2 Edition from Asia ? (PAL) I'm in Australia so it's likely from the Asian Market. Considering it's still in it's plastic bag sealed - Are these things considered rare still? Thanks in advance for any info anyone can provide me with! I'll attach the photos I have in the next comment from my phone.

Hey all, first post as I stumbled across this page while trying to research my halo edition xbox. I pulled it out of storage and wanted to sell it as I havent used it in forever and am fairly out of the video game collecting these days. Memory is pretty fuzzy on this as it's been awhile, but I bought this new when it came out, used it a good amount and then ended up putting the Xenium Ice modchip in with the solderless adapter. It's been in a closet for at least the past 10 years. I believe the hard drive and disc drive are original, almost positive I never replaced those. I hooked it all up and tested it, works great, the only game I had laying in the closet with it was Sneak King, so I tossed that in to confirm the drive still worked, no issues. The case looks great, no cracks. It is missing one of the rubber feet. Controller, power and video cables are the original ones that came with it. I'd like to get $300 + shipping for it, but am open to offers. Pics attached and happy to take others if anyone needs.

Happy Halloween to all the X3 Config Live Skin lovers out there! Webclean is a super simple clean skin, now with a Halloween edition. You can download them all or just grab your favorite one. Enjoy! Downloads See Readme for install instructions. Note: Lite saw some decent updates as well and Dark had one minor adjustment not worth mentioning.

Anyone have a top and dvd bezel for a Halo Edition Console let me know. Need 1 to complete a set.

Hello together! (Sorry for my bad englisch i‘m from austria) A bit of a forword: My name is Markus and i'm from vienna in austria. I'm 23 years old. I grew up with late PS1, PS3, Xbox One/X and Series X. As an hobby i collected video game consoles (MS, Sony, Nintendo, Sega), as well as clean/service them. I realized that i didnt have the time to play them all, so i reduced the collection a bit. I have a special place in my heart for the OG Xbox, because i was always fascinated how the modding scene is still active and cares for the console. So i had the idea to „rebuild“ or „build“ my first console…..and i wanted to be an OG Xbox. My contact with that console, is restricted to having a stock 1.6 and later a softmodded (Splintercell-Softmod) one. But i sold them long ago. But after the last years 20th anniversary of the OG Xbox i saw that as a good time to make „the wish come true“. So here is how it goes: First i had to upgrade my tools, so i bought some tools to do the work properly. I solder/work on other things for a long time now, but for the future (to work on console/motherboards etc.) i bought a desoldering station, a smd hot-air soldering station and a new soldering iron. (A better soldering station is on the way.) I bought some tools like new iFixit kits, painter knifes, tweezer sets and much more: The case/the outer shell comes from a near mint/barley used Crystal Edition 1.6. (I killed the motherboard because of working with inproper tools ) The technical Basis is from a old 2004 1.4 Xbox. I bought it with a defect drive, just for the old motherboard revision. (I want to go for the older revision because its easier to mod, better mod support and for further upgrades not possible with the 1.6) As you see, on this board a few caps are balged and defect. (The badest ones are those around the CPU and the silver 1500uf ones.) I bought a 1.6 recap kit a long time ago and i realized around 80-90% of the caps are usable for the 1.4 aswell. So i recaped the motherboard. In the same time i installed, the pinheader for the LPC port and grounded D0. I also resoldered everything because i dont were satisified with the solder joints. I repasted the GPU/CPU with Arctic MX-4 and installed the headspreader and the brackets for it. The next step was to install the new Noctua 60mm Fan with the help of a 3D printed mounting bracket. Aswell as install the motherboard, psu etc. for a test. I serviced/cleaned the drive of the mint/ barley used 1.6 and installed a new belt. I installed the original HDD for the first test/bootup. I tested it and it boots right up (I was really relieved that it did )! Here are the next steps i will/want to do: Install a WD 500GB with 80 wire IDE cable and IDE/Sata Adapter. Install the custom dashboard/software etc. Install a custom made 20th anniversary edition Jewel on the Xbox and the controllers. (Will take some time until they arrive) Install 128MB of Ram (i dont really use it, but i want to do the installation out of interest. But this will also take some delivery time) "Install/Use" of Bitfunx Xbox2HDMI adapter Paint the button board (the one in the front) black/matte black Work to the metal shield? (Questions following) So up to my question....its about the metal shielding. I know its for signal noise reduction....but i saw a few clear case mods on that forum where they removed the complete shield. Is it possible without troubles/problems? If not, i thought about the idea to only remove the top shield and paint the lower one inside and out in black/matte black. (With sanding the paint of the grounding points.) Whats the better option? Or is it better to just paint the complete top/lower shield on the outside and leavet it that way....(with the complete shield in the console) Also what is your opinion of my first console motherboard work/ first console modding?

CIB. 2 small flaws are noted. Disks are scratch free and tested and working. Can give more details if needed. $25 OBO. Preferred payment is through paypal

Xbox Original Green Limited Edition for sale, good condition and fully working but has been opened at some point as seals are broken. Completely stock nothing modified. Comes with one green controller and power cable. Ive tried to show the inside metal shield in 2 of the photos as there is some slight rusting? I know there was only 5000 of these released in Europe so open to offers as not entirely sure what they are valued? £120 plus buyer pays postage which will be via DPD. UK Only.

Today’s pick up. Was willing to spend some money on myself so I picked up a clean, virgin and working halo edition Xbox with extras. If anyone knows anything about those 2 halo copies looking like mirror reflections please let me know. Thought it was odd. Gonna have a cold one now and game out for the rest of the night

So I’m not the most educated in terms of consoles or modding or repair so please bare with me here. I recently purchased a Translucent Halo edition Xbox on offer up to try and capture that good nostalgia hit that anything from that time does for me and got it for a killer price because of the fact that when it is booted on it errors out to either error 07 or 09. I have jumped down this rabbit hole time after time after time since buying this in trying to troubleshoot, isolate and address what the culprit or culprits are but for every solution I seem to find there I then another 20 questions. I have a very good feeling it is a faulty HDD but I’m not sure if it failed from age or possibly previous owner was trying to mod but the consistent factor and trial error I’ve gone through leads me to believe since it’s clicking that is my issue. Can anyone help me finally complete this project and help me make this the most meaningful console I’ve ever owned?

So I got a Halo Edition Xbox off of ebay to find that it only stays on for 20 minutes before shutting off, the power button does not function, naturally I thought of corrosion on the traces. Upon examining the underside of the board I found no visible corrosion, my question is, which traces do I need to jump in order to fix it? I'm a bit stumped, any help would be much appreciated.

As the title states I am repairing and modding a green 1.6v Halo edition xbox. This console was my wife's and we have had it in our closet for years. I decided to pull it out and see if this thing works for her to play as she refuses to play my PC or xbox one. She doesn't enjoy the new games as I do and wants to play older games she used to play as a child. As of now I have broken down the console and thoroughly cleaned it. I removed the heatsinks and removed all the old thermal paste and replaced it with noctua NT-H1, which is what I use in my PC builds. I noticed that the 5 capacitors closest to the CPU are all bulging and need to be replaced, so I ordered those. For mods, as of this moment I will be installing the Openxenium chip with the LPC rebuild board. I want to install a 2Tb hard drive and I know I'll have to upgrade the IDE cable and ad an adapter. Can someone add part numbers for the cable and adapter. I'll be using the WD Blue 5400 rpm drive for this. I have not made up my mind on BIOS and want to play around with several to find the one I know my wife can use with no problems. If anyone has some suggestions on BIOS let me hear them. Last I want to add some RGB lighting to the build, nothing crazy just a nice soft glow is what I'm shooting for. Not sure where to hook up to power and guess I'll have to search for some power pinouts and such. I would love to see some of your builds with lighting to get some ideas. Anyway I will be taking everyone along this journey as I build and learn this console. Any and all advice is greatly appreciated and I look forward to talking to and learning from you guys.

Hello everyone! Over the course of these few months, I've had a lot of time to think, and I was going over a bunch of Original Xbox Special Edition Concepts that I could do, and my mind went straight to Mountain Dew. The OG Mountain Dew had an Opaque case, it was a simple color, and it was unique enough to garner it's status as probably my favorite Xbox Special Edition. There is, however, one problem that I noticed with the Mountain Dew special edition though, and it's that there are many flavors of Mountain Dew! So, with my imaginative mind, I whipped up something in Photoshop, which'll be visible below. My goal is to TSOP IND-Bios onto it, give the RAM upgrade, and do the usual 2TB HDD upgrade, among other less-visible hardware mods. Right now, I'm trying to source the top shell for an Xbox, so I can't go on with the project until I find a good deal on one. But, in the meanwhile, feast your eyes on this sticker:

Hello. I am currently looking to swap my XCM Crystal Pure White edition case, I got this in a deal with a friend and while it may have some marks on the top shell, its able to be refurbished and cleaned up I am really only looking for a 128mb RAM Xbox currently to finish off my arcade machine xbox build, and only looking for potential interest in Australia as that saves me money on postage. Will also come with a 1.6b motherboard with stock hard drive and dvd drive, will be softmodded before shipping, thanks!

Hey All, I just recently fired up my original Xbox to play some Mercenaries or Ninja Gaiden Black but it appears that the drive will not read the game disks. These disks are near perfect condition and the drive itself will read audio cds. I am at a loss on how to troubleshoot this issue. The Xbox I have is a the Special Edition Halo Green Xbox. I am at this point considering modding this system but I would rather do that to an ebay system instead. I do have the original Splinter Cell with some saved games on it, so if I could get the Xbox to launch that game I could in theory softmod it. But launching the game is a problem. Suggestions? - Thanks. -

Looking for help with my modded Xbox. I had this done by someone (can’t remember who) back in 2005/2006 and I haven’t started it up in over 5 years. I have tried a lot of button combos and it won’t boot up. It won’t even boot up in regular mode either. No matter what I do it turns on then Immediately shuts back off. It is a Halo edition with the X3 and control panel like the one pictured above. Any help would be appreciated. Also looking for recommendations for someone that could repair it if necessary. 7253D5C9-ED2A-4D4D-A5B4-E6A12DBFF7CE.mov

Come with 1 halo control 1 green control has Aladdin chip installed and 1tb hard and has original halo game that came bundle with it $220 shipped USA

Has x3 chip installed and 750gb hard drive 1 blue controller works great also has a crystal control switch it’s a blue halo limited edition Xbox asking 450 for it

There is a way to use it on original xbox?