Search the Community

So my xbox was working fine. I thought there was a wire getting hit by the fan so i opened it up and unplugged the hard drive to see if i could see anything. I didnt so i plugged the hard drive back in and now i cant get the xbox to boot. it just goes to a black screen. the light on the front stays green but its just a black screen. My xbox is hard modded with a xenium chip and xbox HD+. i can boot into the xenium menu and ftp into the console but i can only see "C" and E" folders. i did make sure the cable to the HDD was plugged in all the way.

on one of my hard modded xbox's, i have a 3tb sata3 seagate drive. it has almost every xbox game ever made and some extra stuff too. i have the dashboard set for xbmc4gamers and fast parsing but it loads so slow. i have found that to be the fastest dashboard though. on my softmodded xbox, i upgraded the drive to a 300gb ide seagate drive and the same ide cable. i only have mostly the games that are available with insignia right now plus a few others and it loads to the unleashX dashboard. it loads SOO much faster, even with that old slow ide hdd in it, that i am tempted to use it instead of my hard modded system with all the extra's on it. is there anyway to speed up my hard modded xbox without deleting a bunch of games? i have another hardmodded xbox with a 2tb wd black 7200rpm drive and it only loads 4 seconds quicker(i timed it several time) so a faster harddrive wouldn't help much.

Looking for X3 chips, Control Panels, etc. Plus, if itˋs new in the package and unopened. If the planets align, that is.

Bought a XBox with SmartXX v2 some days ago and it had a to me unknow rebuild soldered in : Pictures Anyone ( @KaosEngineer ) has any info on that board or can tell my it is so different?

I'm considering getting a mod chip for my Xbox, but I'm concerned with soldering as I've only had one prior experience and I fried out the ps2 I worked on installing it. Looking for something that's beginner friendly. Thank you.

tomorrow I will install the ogxbox installer and everything is new to me about og xbox and I don't know what applications are cool and what they can be useful to me

Hello I'm just in the process of dusting off my Green Halo edition OG xbox, that I modded years ago. Had a problem with the hdd, formatted it (with a release of slayers) and never got around to finishing the job. There it sat for 10? years and I am now in the process of sorting it out. I dont remember what chip I put in, but I do recall it has connectiopn to the power and eject buttons. When I press the power button, the dashboard comes up (cant remember which one), and when I press the eject button, I get a boot error screen... wall of text.... I remember that it will boot differently depending on which button you use, but I dont recall what it was. So, to get to the point, is there any reason I should lock the hdd? 120gb ide... Does the MS dashboard require it to be locked? I recall I had the p[rescense of mind to unlock the drive before I worked on it way back when, but dont recall why I locked it in the first place...

I cant see anything in the file explorer and FTP doesn't work either. I tried to load a Bios from a usb but it file explorer is still empty.

Hi guys TLDR: - My xbox's Samsung disc drive no longer works, already tried the usual things. - Am I using the correct replacement laser? - have I overlooked anything for optical drive repair? - Can I still mod my xbox with an OpenXenium chip + can I properly upgrade the hard drive without ever needing the disc drive again (eg for running Hexen or OGXbox installation Disc, or can I use another way to properly set up a 2tb hard drive I've got for the planned upgrade). ________________________ Full version. Hi guys. I've got a stock OG PAL Xbox (v1.1?) that doesn't read any kind of discs anymore. I found this out 3 weeks ago when I took my xbox out for the first time after a few months. It doesn't ever give disc errors. It does not have any hard or soft mods applied yet, but I've got an openxenium chip on hand ready for when I eventually get to modding (also have a 2tb Seagate Barracuda drive set aside as an upgrade). I'll add that I've already removed the clock capacitor almost 2 years ago when I bought the xbox and had zero associated issues. I usually run my xbox via RGB scart on my CRT, and it previously ran without any problems. My OG xbox has a Samsung drive: SDG-605 version B, and originally has a SOH-D16 laser. I initially tried the usual stuff and none of it worked : - cleaned the laser lens - tried lowering the DVD Potentiometer resistance through various ranges (1800ohms from factory, lowered down to 830ohms testing every 100 or so Ohms) - checked the lubricants and deep cleaned the console for any dust/debris. - Eject button and disc tray works fine. I can't find any spare optical drive replacements in the UK currently, so I opted to replace the laser assembly. I purchased the replacement from AliExpress, though the laser model number I received was actually SOH-DR16S, rather than the SOH-D16. The listing stated it was for SOH-D16, but I received the SOH-DR16S instead (I can't seem to find any of the former anywhere). I couldn't find any confirming information about whether these laser assemblies are completely cross compatible in my DVD drive (but all the connector assemblies and ribbon connectors seem to fit perfectly fine). I also followed Bahamutfan64's reddit post and the linked guide to try and prepare the laser for best compatibility*: - swapped the white houseing onto the new laser - desoldered the static protection/storage solder bridges for both potentiometers (and tried my best to minimise static discharge risk when working with the lasers after the safety bridges were removed) - reassembled the laser assembly into the Samsung drive and removed the blue lens protection film - cleaned the lens with 99% IPA to remove any residue from the protective film. - recorded both potentiometers' factory resistances. The CD pot was 800ohms from factory, whilst the DVD pot's factory was 2010ohms. These values failed to boot any of my games or CDs. - I then gradually tweaked and tested my DVD pot down to about 1240ohms, testing at roughly every 100ohm intervals, and still couldn't boot into any of my games. I'm not sure if I should go all the way down to 800ohms onnthe DVD pot on a "brand new" laser. Here's how the Xbox mostly seemed to usually behave with the new laser (and even with the old laser with Pot tweaks): with the game disc inside, the eject button would keep flashing. At the same time the optical drive motor would try a few short bursts of spinning the disc, followed by a longer spin. After this longer spin it gives up reading the disc and the eject button stops flashing. I don't know if this is a sign of the optical drive's spindle motor failing, but I think it may be unlikely. I don't get any error messages, and the xbox simply remains in the green home menu screen (even last year when I had occasional failed disc reads, I would never receive error messages). I tried a range of different known working games and CDs to no success. I want some help and was wondering where to go from here. I have a few questions: Is there any way of telling whether the optical drive's PCB is gone? There aren't any obvious signs such as leaky caps or burnt componenents. I don't own an oscilloscope or any really seriously fancy equipment. The ribbon cables are all intact and I've even tried cleaning all of their contacts and reseating. All the necessary moving parts/gears appear/feel lubricated (doesn't appear overlubed) and the laser's worm gear/motor seems to be working fine. The eject/disc tray motor and associated parts also seem to be working. Is my replacement laser assembly actually compatible? I actually tried ordering 2 laser assemblies, sadly I received SOH-DR16S and not SOH-D16. Would these differences in lasers even matter for my Samsung Drive? They both appear identical. As far as I know, I believe an SOH-D16 can be used in place of a SOH-DR16S, but not sure if it works the other way around for my specific context. Would it be worth me trying the second brand new SOH-DR16S laser as well? I have no way if telling if these new lasers were dead on arrival. If I fail with disc drive repair, could I still successfully install the openxenium chip without ever needing the disc drive? Is it possible to run the OG xbox without an optical drive ever again and still get the key modchip benefits? Ie changing the bios/nand file, upgrading to a 2tb hard drive from stock (and boot my backups from this drive). I know that the Hexen disc/OGXBox installation disc would still require an optical drive, but could I still run these (or at least their features) without an optical disc drive? Is Hexen/OGXbox install disc even necessary in my setup is using OpenXenium? Ideally I'd like to avoid grabbing a second xbox just to salvage a working DVD drive that will likely fail soon anyway. I'm also aware with a modchip I can grab a PC dvd drive to play CD/DVD/burned media if absolutely needed (sadly I don't have one of these to hand, and I won't ever be able to use this to boot my original discs). Sorry for the long post, I wanted to include as much detail as possible including everything I've already tried and considered. *Guides I followed for laser replacement: https://www.reddit.com/r/originalxbox/comments/phuhy3/samsung_sohdr16_laser_replacement/?utm_medium=android_app&utm_source=share http://fillwithcoolblogname.blogspot.com/2011/02/xbox-dvd-laser-replacement.html?m=1

Hey guys, I've got a 1.2 that I spent the weekend revitalizing with all new fresh capacitors and upgrading the RAM to 128mb. Everything went well. I had Xblast reading all 128mb, and everything was working a treat. That is until I went to pull it apart for final disassembly to clean the case and everything up before putting all back together for the last time. I first removed the SATA/IDE adapter from the HDD, leaving the molex connector in place and holding it by the cables and moved the HDD tray out of the way. It was then, that I somehow managed to let the SATA/IDE adapter dangle enough for it to brush the PSU right along side the big 470uF 250v capacitor without realizing it. And in my excited haste, I had not yet disconnected the power cord from the Xbox... As soon as I saw the bright flash and pop that was the SATA adapter getting completely obliterated, my heart immediately sank. The adapter, of course, is thoroughly destroyed. The logic IC and one of the voltage regulators quite literally exploded. At that point, I knew I'd be extremely lucky if it was the only casualty. On the Xbox itself, it blew the T3.15A on the PSU. I had some spare 3 amp glass slow-blow fuses, so I rigged one up until I get the proper cylindrical fuse to replace it later this week. Surprisingly enough, the PSU still works fine, albeit with a slight discolored battle scar on side of the big capacitor... However the motherboard is a different story. It now 3 boot/FRAGs both with or without the X2.3b lite I've had installed for years present. Thinking I had fried it, not feeling too optimistic about fixing it, I harvested the newly installed RAM, and original RAM but subsequently reinstalled the original, after changing my mind on giving up so quickly. Anyway, I've tried all the troubleshooting methods I could with what tools I have at my disposal, which is not much. All the PSU voltages are good. I've swapped PSUs with another, just in case. One observation I made is that the MCPX X3 gets really hot very quickly, so I'm sort of thinking it's shorted and therefore also toast, and that's what's causing it to FRAG. In any case, I figured, maybe I'd share my story for your entertainment, and maybe even see if any of you had any suggestions on what else I might try to test before I go on the hunt for a replacement board and continue scavenging useful parts from this one.

Going to upgrading from base HDD at some point, but didn't want to start with SATA drives right out of the gate. Wanted to use otherwise dormant IDE drives out in the wild, & was wondering exactly HOW one would know if a IDE Hard drive supports locking for softmod Xboxes.

I bought a 1.6 xbox with plans to modchip it. The first time I booted it I got a FRAG, then after turning it off and on it was fine. I tried booting a few times and everything worked, so I chalked the first frag up to disuse for years. I opened the xbox to clean it in preperation for the modchip, make sure caps were fine and all. The metal shield was pretty rusty so following some advise from other posts here I sanded it and painted it with Rustoleum. Other than that, I didn't do anything to the rest of the box. Since putting it back together it FRAGs every boot. Did I cover a grounding connection and need to clear that? Unsure of what move to make. Here are some shots of the board. https://imgur.com/a/iuc8fc1

I mean I can play the game, but I can only select one game mode, and if I get hit even with 1 single punch its KO for me. And also there is a title in the upper corner that I am not using an original copy of the game. I downloaded many different version and all of them had this copy protection. I downloaded the first PS2 ROM put it to my PS3 and that one doesn't have the copy protection enabled, but still an unoriginal copy. Is there any way to patch out copy protection from Fight Club?

I don't remember if its an old problem or not, but what I did recently is I soldered on the Aladdin xt2 chip the "BT" to be always on, and its working fine I mean I can play games, responsive and everything, but I can't turn it off, and it starts right away as soon as I plug it into the wall. With the EvoX dash I could manually turn it off, but then I could not turn it on. The button is green, so its not the button. And its an Xbox 1.6 so theorietically the clock capacitor couldn't leak out onto the motherboard and corrode a trace. Also, I found no corrosion on traces, but I only checked the upper side of the motherboard, I dont really know whats on the other side. Any idea? Thanks By the way this is what I did with the aladdin:

Hello, Just finished doing my first 128mb upgrade on a 1.0 xbox. Overall it wasn't too bad just had to take my time. Used xblast os to make sure all chips were good and let it run for a while and let everything heat up.. everything is good.. Next step was to flash regular bios back to the tsop replacing xblast bios. Got netflash going and loaded up a 1mb x5035... progress bar completed then the xbox rebooted... on reboot I accidentally bumped the power button shutting the xbox off... not sure if I screwd up the flash by bumping the power button or if there was an issue with the bios file I used... Now when powering up the xbox the power cycles a couple times then flashes red/ green with no video output.. I do have a couple Aladin chips around here somewhere I should be able to flash and use but I was just wondering if there is any way to save the on-board flash chip? I seem to recall reading about some modified m7 bios that may allow saving on-board flash but I'm assuming the modified bios would only work with certain bios on the tsop... Can anyone please confirm if I can save the tsop or am I stuck with a modchip on this box? Took my time installing the ram chips only to rush the bios flash... sooo stupid

Hello everyone, A while back I bought a couple of Xbox's 1.0 , 1.3 & a 1.6 . Fixed the first two up and running , now the last one turns on and off 3 times, then flashes red/green without video, previous owner says it had the error 06 but for me It doesn't give a video signal at all. A visual inspection of the board for any bulged capacitors shows no obvious faults, although I am aware that sometimes with an ESR meter (which i dont have) you can tell which is good and which is bad. I'm using a component cable and the V1.6 xbox is a PAL unit and the hard drive inside is definitely not stock 160GB storage and no hard mod is installed. A quick search gives me the idea that its probably the eeprom ( dead or corrupted ) if that is the case and assuming i have no backup as i do not know what the previous owner did to it, what should i do ? if not any ideas what should i check / do to troubleshoot the problem ? . I have a Rpi , arduino and an old eeprom universal flasher ( i will check if it supports the chips ). Oh and i have an Aladdin XT PLUS2 on hand if that would help , but kindly note that I have never used them before but if someone has a guide that would be appreciated as well. Best Regards SP

I have two Toshiba/Samsung drives that have bad lasers, I can only seem to find replacement lasers for Thomson drives available to buy online. Is there anywhere that sells lasers for the T/S drives, or are there lasers from other products that might be compatible? I saw someone online who replaced a Playstation 2 laser with one from a music CD player and it worked, not sure if something like that can be done with the Xbox drives?

I can't see it on Evox trainers list.. Basically I need to overcome a certain bug of the game that doesn't make you gain further skill points once you reach the top grade in career mode (not looking for a complete savegame or other cheats, just something that unlocks the stats).

I got a 1.6 Xbox off ebay today. Still works (minus the dvd drive, but I got several spare dvd drives), but the case is absolutely fucked in and out. After taking the controller ports out, I can't even put them back in - all but one of the posts for screws that hold the controller ports in are broken! I can only hold controller port 4 in with the intact post, all the other posts have big chunks broken off. Is there anything I could rig up to hold the rest of the controller ports down, or bolt it down, or should I just try to find an intact 1.6 case?

I just installed a 2TB SSD in my Xbox, as the previous HDD I had in it died. Once I got a dashboard installed (UnleashX 0.39.0528A), I started copying over my games. After 145 games, I started getting errors during FTP. When required, the FTP client would create subdirectories, but then trying to change in to the newly created sub directory would fail. All file uploads would fail as well. I've tried both FileZilla and WinSCP and both have the same problem. Here's the error from WinSCP: Dir already exists in cache! "/F/Games/<game name>/DATA": Directory not found. I deleted the cache volumes on the Xbox, but the error continues to happen. As it stands, I'm unable to upload anything else to the F volume. There's 708GB free on F, so disk space shouldn't be a problem. I also did a test using the File Manager app on the Xbox. I created a subdirectory in F:\Games and then copied a file from the E: over to the new subdirectory. The file doesn't show up in the subfolder. I did have the my games split between F and G before, but that was because of how the volumes were original configured and there wasn't enough space on a single volume. I should be able to fit everything on F, but this issue is stopping me from doing so. In case it matters, I'm using an M8Plus BIOS with LBA48 support which is patched for the XboxHD+. Both F and G are partitioned to about 972GB each.

https://www.amazon.com/dp/B06XFT1TPJ/?coliid=I34W0053FX96LE&colid=3BP1APT3T9SB8&psc=1&ref_=lv_ov_lig_dp_it

Hey Everyone, I used to have the official xbox component cable, but like a fool didn't understand their value until now. I just recently got back into xbox, purchased a system I'm working on repairing and modding, and I was able to locate a advance high definition AV pack with the component connections. just curious, is the breakout box better than the cable? or about they the same? Thanks! ~John

Got a 1.6 crystal in pretty great condition here with one serious problem - DVD drive (SDG-605) is dead, error 12. Tried swapping a known working DVD drive in and using exactly the same power+IDE cable+HDD it successfully boots to dash so it's definitely the SDG-605 causing the error. If anyone has any working DVD drives they are willing to part with, especially if they're in the UK, that would be great. Otherwise, it's going to be the eBay lottery, and I'm not feeling lucky.

Coming back to the ogxbox is great, but playing games that have inverted look/aim (opposite of modern games) in such a pain and just can't get used to it. Luckily most games have an option to swap but for the ones missing the option is there any way to patch the games? Thanks.