Jump to content
OGXbox.com

Ging3rguy

Members
 View Profile  See their activity

  • Posts

    837

  • Joined

  • Last visited

  • Days Won

    11

 Content Type 

Everything posted by Ging3rguy

  1. Ging3rguy

    Og Slim

    Ging3rguy replied to coliver80's topic in Case Mods

    Thanks, keep us updated. Planning to do one when I have the time.
  2. Ging3rguy
    Hi, you can find a lot of the assembler refugees here https://www.obscuregamers.com/
  3. Ging3rguy

    Og Slim

    Ging3rguy replied to coliver80's topic in Case Mods

    Sorry to ask a couple of dull questions but what did you use to fill the ports and what do you do about bolting down the lid?
  4. Ging3rguy
    Check the cpld for bridges, I found I could program the cpld but then had issue flashing the firmware. It was down to solder bridges I couldn’t even see. Most of the time just running the iron across the pins was enough but a couple I just used solder braid and that solved it.
  5. Ging3rguy
    What part of the world are you in? I have seen them on the UK eBay site and I also have a couple of spares.
  6. Ging3rguy
    Here’s a link to a YouTube video. https://youtu.be/RrONeFj0p3A I was lucky enough to pick up a N64 board in a crystal case with an xecuter x3cp. They do get offered up every so often.
  7. Ging3rguy
    If you want a ram upgradeable Xbox you are going to need anything but a 1.6. 1.0-1.1 have a 1MB bios if you are going to tsop which gives you a bigger selection of bios. The rest are 256KB. If you want the ram upgrade it would be easier to buy one unless you have fairly good solder skills and a half decent soldering iron.
  8. Ging3rguy
    It is not a standard Xbox, you would know if you had one, you get the benefit of it with the ram upgrade and using the Xbox as an emulator. No one is producing them at the moment so the ones that are out there will go up in value.
  9. Ging3rguy
    Here’s the original archived thread for hexen https://xbox-scene.xbins.org/forums/index.php/topic,685469.0.html
  10. Ging3rguy
    Hi, welcome aboard.
  11. Ging3rguy
    Here's a link to an earlier incarnation of hexen https://xbox-scene.xbins.org/forums/index.php?topic=729570.0 I read in another thread that the no dvd m8+ bios was meant for a sharp flash. i think as more modders have put out versions they have created more bugs as they have removed, added and edited files. i didn’t have any issues with the 2019 version but I just used it for the unleashx config.xml and skin
  12. Ging3rguy
    You normally only need to use the password when using the hexen files on the hdd. When doing an install from the main screen from dvd you shouldn’t get that? Mind you it has been a while since I have used it. I think the idea of the password was to stop user f###ing things up by accident, they would have to do it on purpose
  13. Ging3rguy
    There are a couple of YouTube videos on how to do it. It’s pretty straightforward just rename the original and leave it in the c partition until you are sure the new one works. Copy and paste the apps entry and then just rename it.
  14. Ging3rguy
    The config.xml is on your c partition you can either edited it on the Xbox or on a pc using notepad, just add it like the one in this photo.
  15. Ging3rguy
    Well you can put ninja in your games folder for unleashx or you will need to edit the config.xml and add the Emulator heading. In xbmc you just need to set a path to the emulator folder in program.
  16. Ging3rguy
    Do you you have a emulator heading on your unleashx dashboard?
  17. Ging3rguy
    What version of hexen were you trying to use?
  18. Ging3rguy
    And you can see the emulator folder in unleashx and xbmc dashboards?
  19. Ging3rguy
    When you say you have the files on your g drive, do you mean you have them in a folder called ninja inside your emulators folder?
  20. Ging3rguy
    Between the red arrow point and ground. This will give you your potential difference between that point and 0.
  21. Ging3rguy
    Just check your tsop to check what it is before you try to flash it.
  22. Ging3rguy
    You don’t need g, in xbpartitioner just set all to the f partition no need to split unless you want to keep the clusters to 16KB
  23. Ging3rguy
    I think you mean the f partition if you only have a 500GB hdd, use a .67 bios as it gives you the option to have a 2TB hdd.
  24. Ging3rguy
    Take a picture of the motherboard so someone here can see if you have a modchip or tsop. From the information you have given it sounds like you have a 1.0/1.1 with a winbond tsop. Here’s a video on flashing a tsop, you don’t need to use hexen to flash it you can use slayer’s. https://youtu.be/gIw8k5areQg
  25. Ging3rguy
    You can unlock the hdd by using an eeprom reader providing the Xbox powers up. Ryzee has built a cheap arduino based reader but there are other alternatives. Use the reader to get a copy of the hdd key and then use xboxhdm to unlock the hdd. https://github.com/Ryzee119/ArduinoProm

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept