Bottom Case and M/B incompatible?

[Craiguk]

Hi I'm just fixing up a cheap faulty xbox from ebay, it came with no screws, anyway the bottom Case won't fit the motherboard all the holes are 2mm 3mm off centre? Although it fits in the tin housing great. 

No idea what version M/B it is so help would be great. 

So far I cut 2 noggins off the bottom Case, still no joy lol. 

See photos below. 

https://www.dropbox.com/scl/fo/hlgzxwbzpzemvrd5j6zvv/h?dl=0&rlkey=yzsrj2j6jztmu42kj6mvczjd4

Edited December 10, 2022 by Craiguk

[Donnie-Burger]

21 minutes ago, Craiguk said:

Hi I'm just fixing up a cheap faulty xbox from ebay, it came with no screws, anyway the bottom Case won't fit the motherboard all the holes are 2mm 3mm off centre? Although it fits in the tin housing great. 

No idea what version M/B it is so help would be great. 

So far I cut 2 noggins off the bottom Case, still no joy lol. 

See photos below. 

https://www.dropbox.com/scl/fo/hlgzxwbzpzemvrd5j6zvv/h?dl=0&rlkey=yzsrj2j6jztmu42kj6mvczjd4

Mobo is a 1.6 and the caps are bulging.  Case is most likely a 1.0-1.5.

[Craiguk]

Thanks for the information mate, yeah I changed the caps, shaved a 2mm off the 2 plastic legs what the video output screws go to, under the video connector there's also a bit of plastic I cut away.  I'll upload some photos, but it fits like a glove now, mnay thanks