Head2Beast Posted July 12, 2021 Report Share Posted July 12, 2021 I was trying to upgrade my HDD with chimp but end of the sequence I can’t get pass the startup screen (without Microsoft logo). I tried xbhdm both disc and usb but no luck but Iooked at the HDD, C and E files is there but they’re empty. Btw i tried Hexen and og xbox installation discs but again doesn’t worked. I’ll add the board’s picture and you’ll notice that the chip is different and an odd one. I also have HDD’s eeprom. Is this situation salvageable or is it dead? I also have an non-chipped non-softmodded spare one as well. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 12, 2021 Report Share Posted July 12, 2021 I might be wrong but I thought that chip was to play backup game disks only. The easiest is to fit a new mod chip like a Aladdin, Open Xenium, Xenium Ice or with some more work you could lock a HDD and then soft-mod it in order to reflash the onboard bios chip. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 13, 2021 Report Share Posted July 13, 2021 salvageable, since you have the eeprom.bin backup there should be files in the C and E partitions Try using FATXplorer Beta 3.0 Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 13, 2021 Report Share Posted July 13, 2021 3 hours ago, SS_Dave said: I might be wrong but I thought that chip was to play backup game disks only. The easiest is to fit a new mod chip like a Aladdin, Open Xenium, Xenium Ice or with some more work you could lock a HDD and then soft-mod it in order to reflash the onboard bios chip. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. The EPROM replaces the BIOS that normally loads from the motherboard's on-board flash memory chip. However, which modified Xbox BIOS it contains ??? Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted July 13, 2021 Report Share Posted July 13, 2021 I would love to have some close up pic`s of this 29 wire mod if possible. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 13, 2021 Report Share Posted July 13, 2021 20 minutes ago, sweetdarkdestiny said: I would love to have some close up pic`s of this 29 wire mod if possible. The connections to it should look like those here: https://web.archive.org/web/20151009063717/http://www.xbox-scene.com/modchips/ownmod_diagrams.html Quote Link to comment Share on other sites More sharing options...
Head2Beast Posted July 13, 2021 Author Report Share Posted July 13, 2021 3 hours ago, KaosEngineer said: salvageable, since you have the eeprom.bin backup there should be files in the C and E partitions Try using FATXplorer Beta 3.0 I tried but HDD didn’t shown on the list. Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 13, 2021 Report Share Posted July 13, 2021 1 minute ago, Head2Beast said: I tried but HDD didn’t shown on the list. The hard drive will have to be unlocked first. XboxHDM23USB Beta 3 can be used to unlock it. Place the eeprom.bin file in the folder where you extract it. xboxhdm23usb.zip - Google Drive Quote Link to comment Share on other sites More sharing options...
Head2Beast Posted July 13, 2021 Author Report Share Posted July 13, 2021 12 hours ago, KaosEngineer said: The hard drive will have to be unlocked first. XboxHDM23USB Beta 3 can be used to unlock it. Place the eeprom.bin file in the folder where you extract it. xboxhdm23usb.zip - Google Drive I checked after unlock and it's says this "ATA Security is: ENABLED, PW level HIGH, **LOCKED** [SEC4]" Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 14, 2021 Report Share Posted July 14, 2021 What were all the lines displayed after executing the unlock option? There should be many displayed showing the result of each step being performed. What is the vendorID and productID of the USB-to-HDD interface adapter you are using? Some require editing the batch files to add an additional command-line option to each call to the application smartctl.exe. Quote Link to comment Share on other sites More sharing options...
Head2Beast Posted July 14, 2021 Author Report Share Posted July 14, 2021 7 hours ago, KaosEngineer said: What were all the lines displayed after executing the unlock option? There should be many displayed showing the result of each step being performed. What is the vendorID and productID of the USB-to-HDD interface adapter you are using? Some require editing the batch files to add an additional command-line option to each call to the application smartctl.exe. First this: smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org ATA Security is: ENABLED, PW level HIGH, **LOCKED** [SEC4] smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org raw drive serial=4a35455246314247 raw drive model=545331333030343120 drive serial=354a524531464742 drive model=535433313030313441 security_password=d44ec0897120961ff5100ec30e524551e0051d5b000000001c01000000000000 ATA Security unlock smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org raw drive serial=4a35455246314247 raw drive model=545331333030343120 drive serial=354a524531464742 drive model=535433313030313441 security_password=d44ec0897120961ff5100ec30e524551e0051d5b000000001c01000000000000 ATA Security disable Press any key to continue And than this: 6smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: IOCTL_SCSI_PASS_THROUGH_DIRECT failed, Error=121 A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org6 Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 14, 2021 Report Share Posted July 14, 2021 5 hours ago, Head2Beast said: First this: smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org ATA Security is: ENABLED, PW level HIGH, **LOCKED** [SEC4] smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org raw drive serial=4a35455246314247 raw drive model=545331333030343120 drive serial=354a524531464742 drive model=535433313030313441 security_password=d44ec0897120961ff5100ec30e524551e0051d5b000000001c01000000000000 ATA Security unlock smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org raw drive serial=4a35455246314247 raw drive model=545331333030343120 drive serial=354a524531464742 drive model=535433313030313441 security_password=d44ec0897120961ff5100ec30e524551e0051d5b000000001c01000000000000 ATA Security disable Press any key to continue And than this: 6smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: IOCTL_SCSI_PASS_THROUGH_DIRECT failed, Error=121 A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org6 Your USB-to-HDD interface adapter is not working with smartctl.exe. Determine which chipset is uses by running usbview.exe. In this standalone application, find the adapter's vendorID and productID. usbview.exe's VirtusTotal results: https://www.virustotal.com/gui/url/39df12123758a75a1c9fc9de299315136d53a65e15602c028d842d762dff1234/detection 0/88 security vendors flagged this URL as malicious. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 15, 2021 Report Share Posted July 15, 2021 On 7/13/2021 at 2:09 AM, Head2Beast said: I was trying to upgrade my HDD with chimp but end of the sequence I can’t get pass the startup screen (without Microsoft logo). I tried xbhdm both disc and usb but no luck but Iooked at the HDD, C and E files is there but they’re empty. Btw i tried Hexen and og xbox installation discs but again doesn’t worked. I’ll add the board’s picture and you’ll notice that the chip is different and an odd one. I also have HDD’s eeprom. Is this situation salvageable or is it dead? I also have an non-chipped non-softmodded spare one as well. Thanks in advance. You could try making a new hard drive with Fatxplorer and see if it boots from that as the mod chip may/should allow a unlocked hard drive. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Head2Beast Posted July 15, 2021 Author Report Share Posted July 15, 2021 Just now, SS_Dave said: You could try making a new hard drive with Fatxplorer and see if it boots from that as the mod chip may/should allow a unlocked hard drive. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. I tried but as Kaos said maybe it’s because of the adapter. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 15, 2021 Report Share Posted July 15, 2021 Was that was trying to reuse the old HDD and have you tried with a new HDD? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Head2Beast Posted July 15, 2021 Author Report Share Posted July 15, 2021 10 hours ago, SS_Dave said: Was that was trying to reuse the old HDD and have you tried with a new HDD? Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Both. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 15, 2021 Report Share Posted July 15, 2021 Or you could try and find a PC IDE DVD drive to connect in place of the Xbox DVD drive and use a install DVD to repair the HDD in the Xbox. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Head2Beast Posted July 15, 2021 Author Report Share Posted July 15, 2021 2 minutes ago, SS_Dave said: Or you could try and find a PC IDE DVD drive to connect in place of the Xbox DVD drive and use a install DVD to repair the HDD in the Xbox. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Is there a tutorial of this? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 15, 2021 Report Share Posted July 15, 2021 A hard modded (mod chipped or bios reflashed) Xbox can use a PC DVD drive to read non original game disks and home brew disks ( Hexen, OGXbox Install, Slayers). You will need a power cable splitter for the 4 pin HDD power. Then remove the 40 pin cable from the Xbox DVD and connect to the PC DVD. Then load the install disk in the PC did drive and power cycle the Xbox and it should load. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Head2Beast Posted July 15, 2021 Author Report Share Posted July 15, 2021 29 minutes ago, SS_Dave said: A hard modded (mod chipped or bios reflashed) Xbox can use a PC DVD drive to read non original game disks and home brew disks ( Hexen, OGXbox Install, Slayers). You will need a power cable splitter for the 4 pin HDD power. Then remove the 40 pin cable from the Xbox DVD and connect to the PC DVD. Then load the install disk in the PC did drive and power cycle the Xbox and it should load. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Nope. 07 again. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 15, 2021 Report Share Posted July 15, 2021 Here is a description of error 7 in case you haven't found it. Error Code 07 Problem: Hard drive timeout / HDD took too long to become ready. Cause/Solution: The Xbox seems to know the HDD is present but it times-out waiting for the drive to become ready and respond to commands. This is probably due to a loose connection or faulty wire. See the solution for Error Code 08. If you're using a SATA to IDE adapter, it's possible that the adapter you're using is not compatible with the drive you're using or isn't compatible with the Xbox at all. Try another SATA to IDE adapter / HDD combination. Some "green" drives are temperamental with certain SATA adapters. This error may also be caused if you have a SATA to IDE adapter and you are not using an 80 pin IDE cable (by default, they are 40 pin cables). Or, the console's DVD drive is bad preventing access to the hard drive via the IDE bus. Swap the DVD drive with one from a different Xbox. They are all interchangeable. Error Code 08 Problem: No hard drive found. Cause/Solution: The Xbox can't find the hard disk drive (HDD) while booting up. Try the following: If you are using a SATA to IDE adapter, you will need an 80 pin IDE cable. By default, it will be a 40 pin cable. Make sure the IDE ribbon cable (flat grey cable) is securely connected to the HDD, the DVD drive, and the motherboard itself. Check the IDE cable for signs of damage. If the cable looks like it has been scraped or has evidence of any damage then replace it. Check the HDD's power cable and make sure it's securely plugged in. If you can wiggle the HDD power cable around and make the Xbox work at certain times, then the leads coming from the power supply are loose and the power supply should be replaced. Take the HDD out and make sure the jumper is set correctly. There should be a diagram printed on the drive's label that shows how the jumper should be connected. Make sure its set to Cable Select (CS), Master, or isn't present at all. If the drive is set to Slave then you will run into issues! If all other cables are in fact securely connected and not damaged, you can try replacing the IDE cable anyway. It's possible that it is damaged in a way that isn't visible and IDE cables are cheap to come by. If all else fails, your hard drive is probably to blame and is faulty and needs to be replaced. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Head2Beast Posted July 15, 2021 Author Report Share Posted July 15, 2021 Just now, SS_Dave said: Here is a description of error 7 in case you haven't found it. Error Code 07 Problem: Hard drive timeout / HDD took too long to become ready. Cause/Solution: The Xbox seems to know the HDD is present but it times-out waiting for the drive to become ready and respond to commands. This is probably due to a loose connection or faulty wire. See the solution for Error Code 08. If you're using a SATA to IDE adapter, it's possible that the adapter you're using is not compatible with the drive you're using or isn't compatible with the Xbox at all. Try another SATA to IDE adapter / HDD combination. Some "green" drives are temperamental with certain SATA adapters. This error may also be caused if you have a SATA to IDE adapter and you are not using an 80 pin IDE cable (by default, they are 40 pin cables). Or, the console's DVD drive is bad preventing access to the hard drive via the IDE bus. Swap the DVD drive with one from a different Xbox. They are all interchangeable. Error Code 08 Problem: No hard drive found. Cause/Solution: The Xbox can't find the hard disk drive (HDD) while booting up. Try the following: If you are using a SATA to IDE adapter, you will need an 80 pin IDE cable. By default, it will be a 40 pin cable. Make sure the IDE ribbon cable (flat grey cable) is securely connected to the HDD, the DVD drive, and the motherboard itself. Check the IDE cable for signs of damage. If the cable looks like it has been scraped or has evidence of any damage then replace it. Check the HDD's power cable and make sure it's securely plugged in. If you can wiggle the HDD power cable around and make the Xbox work at certain times, then the leads coming from the power supply are loose and the power supply should be replaced. Take the HDD out and make sure the jumper is set correctly. There should be a diagram printed on the drive's label that shows how the jumper should be connected. Make sure its set to Cable Select (CS), Master, or isn't present at all. If the drive is set to Slave then you will run into issues! If all other cables are in fact securely connected and not damaged, you can try replacing the IDE cable anyway. It's possible that it is damaged in a way that isn't visible and IDE cables are cheap to come by. If all else fails, your hard drive is probably to blame and is faulty and needs to be replaced. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Thanks. I'll look in to it. Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted July 15, 2021 Report Share Posted July 15, 2021 I would also try a different IDE cable, I have a 80 way cable here that looked 100% but would not work. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.