Jump to content

Recommended Posts

 recently got a debug kit I have been trying to look for ways on how to FTP 2 debug kit. The only media this would read that will allow you to FTP is the dashboard Avalanche. These were made on the Old Source codes that's why it can read it. But you really want the Alpha version it's a special version (Alpha v0.49.1)

This is the only Dash or program this debug kit will play. Once it boots up go into file manager using the CD to get there. Copy files from DVD drive into the E partition you can make a folder call it apps and place individually everything on the contents of the CD you made... once that is done you can reboot the system open Avalanche go into FTP settings. You want to change your IP address to whatever you have on flashfxp or Windows .. once you are linked you can pull off any programs that you want to make a copy for yourself. Another thing you can do is download an app called retail game loader V 1.20. This app will allow you to play retail games as well as emulators or anything the original Modded Xbox can play. How you use it is once you FTP to hard drive and is complete reset the system then under xdk launcher click on the newly installed app retail disc loader V 1.20... once that is launched it will look like the exact same Dash except now you can load anything you want. I was giving a lot of help from a lot of different sources in order to make this post to this form. Please if you know any other tricks leave a comment below if not this will work for sure I've tried it myself 100%. Thank you very much for reading have a great

Frankie d

20180619_180142.jpg

15295295637896458928569775455326.jpg

Link to post
Share on other sites
  • 2 months later...
  • 1 year later...
  • 4 months later...
  • 1 month later...
On 9/23/2020 at 5:18 PM, Shabazz18 said:

I need to FTP to (from) a Development Kit

Easiest way is to use Yelo Neighborhood. It's a newer replacement for the old connection software included in the official SDK that lets you connect to your Xbox (dev kit/debug kit) from a Windows PC. Works on Windows 10 too. Just connect your console to your home network and run this on your PC to see your Xbox's files.

http://www.remnantmods.com/forums/viewtopic.php?f=5&t=1771

You can then load up Hack-devkit-GueuX-V2 to gain access to your entire E drive and also run retail games/apps (such as proper FTP apps).

  • Like 1
Link to post
Share on other sites
On 9/23/2020 at 7:18 PM, Shabazz18 said:

I need to FTP to (from) a Development Kit

Not how you are meant to move content to/from an Xbox Development Kit. 

Use Yelo as already suggested by @GoTeamScotchor the Xbox Neighborhood found in the official software development kit.  I don't believe the SDK will install and run properly on Windows 10.  You'll need to setup a Windows XP SP3/SP4 computer or virtual machine.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Amigaz
      Xbox console revision 1.0 in good condition with the following specs:
      TSOP flashed
      2TB SATA hdd
      Digitus SATA -> IDE adapter
      80pin IDE ribbon cable
      On the HDD is the excellent full Arcadepunks XBMC Origins frontend!
      Here is a video they made to demonstrate it: https://www.youtube.com/watch?v=XirumHggTqc
      The unit has been fully cleaned, no noisy fan's or bad capictors.
      The DVD drive is serviced and fully working.
      The power supply is 220volt
      Picture gallery with images of the Xbox running: https://jiggmaster.synology.me:5008/mo/sharing/5a0ZhM9jY
      Item located in Sweden, shipping worldwide
      Price = €100 excl. shipping
    • By madmon
      Hey so I have a 1.0 and the main fan header isn't working. Can I just replace the mosfet or is there a greater issue? 
    • By Lina_Inverse_
      Hi everyone!
       I have a 1.4 with trace issues, upon plugging in the power it starts automatically and when it's off, will occasionally boot at random.
      I managed to repair one trace as a preventative but not the 3 needed to ensure it's not an issue anymore, I found them too hard to work on
      https://imgur.com/gallery/ExATwa6 (not my pictures, just as an example!)
      I did the equivalent of the white wire and blue, is there another place to solder the other green/purple equivalent connections? It would be on the other side of the board I assume.
       

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.