wisnoskij Posted April 28, 2021 Author Report Share Posted April 28, 2021 8 hours ago, SS_Dave said: re-solder all the pins on the LPC. that seemed to fix the voltage irregularity. is that what you always find with an insufficiently connected conection? a higher than usual voltage? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted April 28, 2021 Report Share Posted April 28, 2021 2 hours ago, wisnoskij said: that seemed to fix the voltage irregularity. is that what you always find with an insufficiently connected conection? a higher than usual voltage? The poor solder joints (Dry Joints or Cold Solder) are just a bad solder connection and could cause a lower or higher reading. On the LPC port there is 4 main readings 0 volt (ground), 5 volt, 3.3 and pin1 is normally 1.5 volt. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
wisnoskij Posted May 2, 2021 Author Report Share Posted May 2, 2021 My nephew got this as a birthday present Yesterday. He loved it. Thanks everyone! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.