Jump to content

Easy one-click method for programming the Openxenium CPLD in windows with an <$3 adapter


Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By calebTree
      I grabbed a Kernel file from this page and I flashed it with XBlastOS.
      Does the kernel have to match the original kernel? 
      What is the kernel relative to the BIOS? Normally kernel and BIOS are two very different components of a computer. I shouldn't have been able to flash the TSOP with the kernel correct?
      How are those kernels meant to be used?
      I was looking for the default BIOS.
      Thanks
       
    • By MaineBear
      A friend gave this modded Xbox but didn't know much about it.  I've had soft modded ones. but don't know much about the hard ones myself either.
      It has a larger hard drive.  When you turn it on it gives the 09 error and ring flashes red and yellow.  Someone told me that button should be held on the controller when you turn on the Xbox but isn't sure which ones.  Would that cause the 09 error?  
      Thanks for any help.

    • By gehx
      I have an OpenXenium chip installed in my 1.6 box w/ 2TB Sata HDD;  StarTech adapter; Chimeric custom 80 ide cable. 
      I just finished installing the Xenium RGB mod by Nemesis.  So I downloaded all of the Xenium OS LED and Skin files.  Uploaded them to their own subdirs in a subdir named XeniumOS on E:\
      so:
      E:\XeniumOS\Skins
      -and-
      E:\XeniumOS\LEDS
      when I select Choose LEDs... the only thing that shows up is <Default>, not the list of leds.  I thought that was weird so I made sure E:\XeniumOS dir existed w/ sub dir LEDS, yep it does.  Still stumped I thought well maybe the chip isn't reading from the HDD for some reason...so I opened Disk Tools from the OS menu and selected Format Partition and choose the Z partition.  Selected Master selected Yes all the way through til I was REALLY sure....it said "Failed to format partition!"  Did the same for Slave.  So I confirmed it's not reading from the HDD...then I thought well i should FTP in and see if I can see the list of directories, they aren't there. 
      I put my orig 8GB IDE HDD in w/ orig IDE cable and tried the same thing....it shows the LED files and Skin files.  I'm stumped trying to figure this out.  I've made sure the blue end of the IDE cable is connected to the HDD.  Tried ALL of the jumper locations on the StarTech adapter; Master, Slave, CS and the other one.  I have no idea, I gave up for the evening.  
      FWIW, XBMC loads fine and I can see all of my files in the dash and FTP, games and apps load fine from the HDD...so It's a Xenium OS issue;  it's probably related to another issue but I'm not sure what it is so I made this post asking for help.
      Can anyone offer a suggestion on how to get read access to my sata HDD in the Xenium OS?
      TIA!

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.