Jump to content
Sign in to follow this  
TH3D0N614

New To the Modding Og Xbox Scene

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By bulkchart32
      i found some new lasers for phillips drives and bought some. these were brand new because i had to desolder the esd protection solder points on it. i replaced the laser in a drive that would not work at all and now it is working. however, it won't read any disks that have any kind of serious damage. my old samsung and hitachi will play them fine but they have to be almost perfect for my phillips to read them. i have heard about how phillips turn the laser strength down in an attempt to prevent the from reading cd-r disks(fyi, i'm only trying to read official xbox disks). my question is, should i adjust the pots on this new laser so that the laser is stronger? i've heard that will shorten the life of the laser but i'm wondering if they were even turned up high enough in the 1st place?
    • By bulkchart32
      if u have a v1.6 that is connected with a component cable(green,blue and red cables) then u probably know there are a few games that are scrambled if u try to play them in 480p and u have to set the xbox to 480i to unscramble the the picture. here is a simple workaround that i just discovered.
      1.power on your xbox and pull the power cord with the system on.(the step may not be needed but it sometimes it)
      2. plug your xbox in, hold a controller in one hand and hit the power button with the other, then click in the left and right sticks along with holding down the L and R buttons and hold all 4 buttons until u get to the xbox desktop(make certain the system doesn't have a game in it so it will boot to the desktop).
      3. if u did things correctly u should see the screen flicker and go into 480p mode as the desktop is coming up. hit the INFO button on your tv remote to make certain that the display is in 480p mode(and not 480i).
      4. make certain the 480p mode is set to YES in the system settings menu and then throw in a game and see if it works. i used fable(non-lost chapters version) and it worked perfectly.
       
    • By bulkchart32
      haven't been able to find a vid of it. anyone know of one?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.