HyPeRcOoLeR Posted November 1, 2023 Report Share Posted November 1, 2023 Can someone help me identify this Modchip, and what is that "chip" betwen the wiring. The box is a v1.1 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted November 1, 2023 Report Share Posted November 1, 2023 48 minutes ago, HyPeRcOoLeR said: Can someone help me identify this Modchip, and what is that "chip" betwen the wiring. The box is a v1.1 That's a new one, seeing it hooked up to that capacitor like that. Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted November 1, 2023 Report Share Posted November 1, 2023 What modchip it is, is literally written oon the PCB. See pic 1 : LPC Mod v2.0. It belongs to the family of cheap mods. 1 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted November 1, 2023 Report Share Posted November 1, 2023 27 minutes ago, sweetdarkdestiny said: What modchip it is, is literally written oon the PCB. See pic 1 : LPC Mod v2.0. It belongs to the family of cheap mods. You have any idea what this whole capacitor getup is? Also the wire hooked up to the resistor... They're both hooked up to this unknown device in the middle of the wire. This some kind of fucked up D0? 1 Quote Link to comment Share on other sites More sharing options...
ChriZz Posted November 1, 2023 Report Share Posted November 1, 2023 Presumably to activate and deactivate the chip with the power button. Previously because of Xbox Live back then. Quote Link to comment Share on other sites More sharing options...
HyPeRcOoLeR Posted November 1, 2023 Author Report Share Posted November 1, 2023 If thats the case can i remove it and make the modchip permanent? Because sometimes my Xbox isn't booting up it gives me a hdd error code. (maybe because i somehow turn of the modchip, and my hdd isn't locked) Quote Link to comment Share on other sites More sharing options...
sweetdarkdestiny Posted November 1, 2023 Report Share Posted November 1, 2023 Remove the red wire from the modchip. Then remove the rest and put it aside or in the bin. Then take a look at the pic below. Solder a SMALL wire to the D0 point on the bottom and solder the other end to GND. The chip is then always on. About your HDD. if your HDD error is a " HDD timeout" it's probably on the way to pass out. 1 Quote Link to comment Share on other sites More sharing options...
ChriZz Posted November 1, 2023 Report Share Posted November 1, 2023 I would go even further, remove the chip and flash the TSOP. After all, it's a 1.0 Xbox. You can put the chip aside. if a 1.6 is added. Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted November 1, 2023 Report Share Posted November 1, 2023 33 minutes ago, ChriZz said: I would go even further, remove the chip and flash the TSOP. After all, it's a 1.0 Xbox. You can put the chip aside. if a 1.6 is added. @HyPeRcOoLeR Or keep it, put a switch in the D0 loop to enable and disable, and put an alternative bios on the TSOP. Then you have 2 banks! Quote Link to comment Share on other sites More sharing options...
Marty Posted November 1, 2023 Report Share Posted November 1, 2023 3 hours ago, sweetdarkdestiny said: ...in the bin. That would be my choice. Quote Link to comment Share on other sites More sharing options...
HyPeRcOoLeR Posted November 1, 2023 Author Report Share Posted November 1, 2023 Thank you guys for the replies, especially sweetdarkdestiny 1 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted November 1, 2023 Report Share Posted November 1, 2023 19 minutes ago, HyPeRcOoLeR said: Thank you guys for the replies, especially sweetdarkdestiny @sweetdarkdestiny is the man! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.