Search the Community
Showing results for tags 'xeniumice'.
My V1.1 Xbox is triple fragging, this happened after I tried swapping out the 40 Pin IDE cable for a 80Pin one. I've done a bit of debugging and found that the LPC header pins 3 and 5 aren't reporting correct voltages both reading below 1v What I think has happened is when I installed the 80 Pin IDE cable I without knowing freed up one of the solder joints on the switch that's on the XeniumICE which switches it into recovery mode(I have resoldered the broken joint and it didn't change anything and yes the switch is in the correct position, though I've tried both positions and still a frag) and somehow that's caused something to get fried but I'm not sure what exactly Uploaded some pictures of my LPC header soldering and D0 point for shits and giggles I have done continuity tests to the alternate points and they're all reading with continuity https://imgur.com/a/rBbAdlR
When I first thought about doing this I never expected it would come together... None of this would have been possible without Ryzee119's work on the CPLD firmware! For more details please visit my Main thread over at EmuXtras: https://www.emuxtras.net/forum/viewtopic.php?f=187&t=6786 Quick demonstration of adding bios from a USB device, dimming feature and full RGB front panel and controller ports. NOTE: Due to poor lighting it is difficult to distinguish between some colors: "Green and Amber", "Cyan and White"... Sales/Pre-Orders Payments made through PayPal... Standard Xenium Bundle: $60 AUD + Shipping ($40 USD / €37 EUR *approx.) Premium Xenium Bundle: $80 AUD + Shipping ($54 USD / €49 EUR *approx.) Massive Xenium Bundle: $100 AUD + Shipping ($86 USD / €62 EUR *approx.) * Prices may vary depending on international exchange rates. For sales and general inquiries you can contact me via, Email: [email protected] Discord: https://discord.gg/g9RJnRb Shipping Local postage within "Australia": Standard Postage = $8.95 AUD Express Postage = $11.95 AUD International shipping from "Australia" available! Shipping to the USA\Canada: Standard Shipping = $24.00 AUD Express Shipping = $39.00 AUD Known Issues Links to Ryzee119's GitHub in regards to known issues... XeniumOS hangs without DVD drive (Ryzee119) XeniumOS graphical issue on v1.6 Xboxes (Ryzee119) Guides/Manuals Below are a collection of links that I thought are still relevant for various installations, The "Quick Solder Install Manual" is included even though I wouldn't recommend it. Would like to create some new manuals particularly for the RGB and LPC mods... Xbox Version Detection Guide (Xbox-Scene) BIOS Variants and Features (Reddit) Xenium - Total Noobs Guide (cap269) Creating Bios CD Manual (TeamXodus) Locating the LPC & D0 Point (TeamXodus) Pinheader Install Manual (TeamXodus) Quick Solder Install Manual (TeamXodus) v1.6 Install Manual (TeamXodus) Xenium Update Manual (TeamXodus) Xenium v2.0 User Manual (TeamXodus) Availability Bundle Availability: Standalone Bundle = 16 sets Premium Bundle = 15 sets - 2 sold Massive Bundle = 14 sets - 4 sold Mod-Chip Color Availability: Blue Mod-Chip = 25 pieces - 3 sold Black Mod-Chip = 10 pieces - 2 sold White Mod-Chip = 10 pieces - 1 sold Xenium Bundles The below bundles include everything one would need for a complete installation, A basic 30 to 40 watt soldering iron should be more than enough for the job. The RGB controller ports require some cutting, I would really recommend a cheap Dremel knock off from your local hardware store with a cutting wheel/blade... Standalone Xenium Bundle 1x Xenium ClassicICE Modchip (Blue, Black or White) 1x 2x6pin Male Pin Header 2x SH 2pin 100mm "DIY" Cables 1x XeniumUSB Adapter (Blue Only) 1x XeniumLPC, either for v1.0-1.5 or v1.6 (Green Only) 1x Complementary "Xenium" Sticker Premium Xenium Bundle 1x Xenium ClassicICE Modchip (Blue, Black or White) 1x 2x6pin Male Pin Header 2x SH 2pin 100mm "DIY" Cables 1x XeniumRGB Front Panel (Blue Only) 1x SH 10pin 300mm Cable (White Only) 1x SH 6pin to PHD 2x10pin Cable 1x XeniumUSB Adapter (Blue Only) 1x XeniumLPC, either for v1.0-1.5 or v1.6 (Green Only) 1x Complementary "Xenium" Sticker Massive Xenium Bundle 1x Xenium ClassicICE Modchip (Blue, Black or White) 1x 2x6pin Male Pin Header 2x SH 2pin 100mm "DIY" Cables 1x XeniumRGB Front Panel (Blue Only) 1x SH 10pin 300mm Cable (White Only) 1x SH 6pin to PHD 2x10pin Cable 2x XeniumRGB Controller Ports (Blue Only) 2x SH 4pin 100mm "DIY" Cables 2x 150mm Lengths of Kynar Wire 2x XeniumUSB Adapters (Blue Only) 2x XeniumLPC, both for v1.0-1.5 and v1.6 (Green Only) 2x Complementary "Xenium" Stickers Accessories XeniumRGB Is a set of modules for RGB lighting with the aim for an easy install which should look like the above demonstration. The front panel also acts as a breakout board for the RGB ports and other mods, the RGB controller port modules are design to be directly soldered to the shielding. RGB Front Panel (Front) RGB Controller Ports (Pair) XeniumUSB A cable-less alternative way to convert a xbox port to USB which will be a standard inclusion with the modchip. XeniumLPC Are a pair of modules to aid with the installation of the modchip, also a standard inclusion. LPC for Xbox versions 1.0-1.5 (Left), Rebuild LPC for Xbox version 1.6 (Right) Original Comparison
I wasn't sure where to put this, but here goes. I installed a XeniumICE massive bundle by Nemesis recently in a Halo blue console and a skeleton black (transparent gray). Everything is connected including the wires for the dim function on the controller ports. It looks absolutely awesome, but because the console is transparent the front panel LED's are brutally bright in a dimly lit or dark room. So bright that they distract from the TV while playing. This wouldn't be an issue if I was using a solid color console as the LEDs aren't directly visible, but that isn't an option. I found the demo too dim that was included in Nemesis' Xenium Essentials which dims during boot and in XeniumOS, and I found the setting in XBMC where the "Off" setting dims them, but the moment I load a game they are back to being staring into the sun bright. I know this is because once the game is loaded, XBMC is dropped until IGR is used to exit. I have searched endlessly and cannot find an answer as to how to dim the front panel LEDs all the time. Is this even possible? Any help at all would be greatly appreciated as I'm almost at the point where I'm going to remove the front panel and put electric tape in front of the LEDs, but I know that would look like hell and would drive my OCD nuts. Thanks in advance!
Board Life Status
Board startup date: April 23, 2017 12:45:48