Search the Community

DHCP, PC and Xbox are wired ethernet. All devices in the same room. Basically one day it was fine and the next it wasn't. Its so strange. When I ftp to any xbox from my PC, it maxes out around 1mb on FlashFXP. I have tried from Linux using a different client. Also tried 3 different windows clients. I changed out modems and ethernet NIC. If I setup an FTP from one xbox to another, the speeds between them are great/normal like 11mb. I can take files FROM the xboxs to my PC at the same speed. This is not simply just a 1 xbox issue if you cant tell. Any xbox I hook up, same shit happens. I tried 3 different dashboards. Tried different HDDs obv. The only thing I can think of is around the time this started happening, I did the forza multiple screen thing through DHCP. However my setup has completely changed since then, and new xboxs too. I am really lost on what this could be. I feel like i have covered every single base, but problem persists. This has happened to me in the past and 2 things fixed it. One time, I changed the ethernet cable. Tried that this time, didn't work. It specifically happened after a windows update way back so i reverted to an old version and that fixed it. However trying linux I feel has ruled that out. /shrug

2nd picture will be in the comment. i'll let y'all know how these work out. they look pretty nice.

Just got 3 xbox for $6.35 Canadian. Two are booting in so far. Gonna be a fun night cleaning and replacing heatsink grease. Wish me luck

I have to xboxs that dont work, the first one is flashing red and 2nd xbox flashing orange

HI Peeps, Got hold of another batch of Xboxs from my friend who runs an auction house. 11 for £100, not bad i dont think. Anyway a couple of these have X-bit modchips in, one was missing the little control board but the other one has it. Neither of the consoles boot to a dash, one has error 5 and the other has no power at all. I have removed the chips to try them in another confirmed working xbox i have here as if they work then i will re use them. I have never had any experience with these chips before and was wondering if anyone here has? More specificly does any one know where i can get the v1.0 of the Xbit flashing software, i managed to find the v1.5 version last night but it does not want to work to flash either of the chips, i can connect but upon clicking on format or anything nothing happens. Ive tried doing this on various versions of windows from 7 back to win 2k, all had the same results. I have spent all evening last night reading up on these chips as much as possible and there is quite a bit of conflicting info out there so any help/advice with this would be very much appreciated I am pretty sure the chips i have are not the v1.5 of the chip as there are no 1.5 markings as apparently there are supposed to be., so i want to try the v1.0 software to see if it makes any difference. It could just be that both chips are dead and im wasting my time, if thats the case then so be it but i cant be sure until ive tried everything. Thanks in advance

I have an old softmodded Xbox with a 2TB hard drive that is loaded. I just ordered a new Xbox that I will be softmodding. How do I move my 2TB hard drive from the old Xbox to the new one? (I want to keep everything that's on the 2TB hard drive) Please keep it simple. I'm new to this whole modding thing. Detailed step by step would be much appreciated.

So I've had a modded Xbox original for a few years now, and I just got around to using it again. Thanks to this forum it's running much stronger. Upgraded to the Startech SATA adapter, changed to an 80wire IDE cable (not pictured) and then moved over to a TSOP flash instead of a softmod.