Search the Community
Showing results for tags 'xbox'.
-
just got a xbox. it doesn't seem like it's ever been opened before but it's missing the GPU heatsink clamp. all the stickers were still in place when I got it. are there any alternative for the clamps I can use or do I need to buy one from feebay? xbox
-
hi can anyone help my og xbox keeps shutting of randomly any ideas?.
-
Following the footsteps of these gentlemen & crew: Trusty N64 Freak FriendTech I intend to upgrade the CPU in my Xbox, for Linux performance. At some point (after I have an SMD rework station) I intend to upgrade the RAM also. At this stage I'm just researching the feasibility, and seeing what I'm jumping into. I believe I can use a CPU socket (495) from a mobile Pentium 3 to use a P3 1 GHz "SL53s" with minor accommodations made. I will need to comb over the datasheets as I don't currently know If I can just "drop in" a faster 495 mobile celeron/P3, say after I've installed a CPU socket from an old laptop. Processors I've seen photos of installed in adapters include: SL5XL The Tualatin 1.4 GHz 512KB L2 Cache and 133MHz FSB SL53S Seen in N64 Freak's 1GHz mod, apparently using a cpu w/ 100MHz FSB is not out of the question. SL657 Seen in an adapter board somewhere. I wouldn't try an SL6BY because the core voltage is lower than 1.5V and the original CPU used up to 1.7V Some concerns I have: VID Voltage Range, VID[4:0] SSE Technology, SpeedStep Technology. GTL+ (do any of the cpus use the older GTL, if not then it is not a concern at the moment) Bus Speed: Can I use a chip with 100 MHz FSB? Nobody wants to downgrade.. L2 Cache: Does this matter? Can I simply use a chip with more, believe I can because Trusty & N64 freak have already done this without issue. To slow the CPU speed, they are apparently using STPCLK# assertion. This is accomplished on the adapter PCB with the necessary support components added. My first attempts will not include provisions to slow the performance, as playing games on the console will not be an immediate priority. I'll have to check the usual places and see if I can locate a CPU area schematic for the Xbox, I believe it is in the wild, if anyone has details, please PM me! The socket 370 to 495 adaptor shouldn't be too difficult to create seeing as how I have some datasheets to work from. First attempt I will use a standard 495 PGA mobile cpu (currently looking for one w/133 FSB) in a recovered 495 socket, then comes the task of designing an adapter board to go from 495 to 370. If N64 Freak would like to comment his words will be greatly appreciated, I'm not here to steal anyones thunder; just looking for a performance gain. I have datasheets from that era attached below, I'll have to see if the SL5sn (xbox) CPU is mentioned. Thanks everybody! =================== ---All The Best--- =================== -LeapFrogging ia-platform-basics-paper.pdf p3_ds_CPU_MOD.pdf moreCPUhere_28365403.pdf 29859603_CPU_MOD.pdf here_24530624.pdf III Processor 1400 512KB L2.pdf celeron.pdf KC80526LY500256SL4JP-Intel.pdf
-
Took me 2 days to get all the wiring right. for the wii2hdmi for og xbox modd ... using a wii2hdmi device ordered off eBay you can also find an Alibaba and other places like this. Very inexpensive around 5 Canadian dollars. You're also going to need some sort of a donor Xbox RCA wires or component wires in order to pull this off. There is 11 connections total five of which are ground I do not suggest not adding all the ground cuz could cause interference. Had pretty good luck I made to both of them are crystal clear with no interference. I tested on version 1.0 as well as version 1.4 turned out very good. I tried to look up and down online for some sort of schematic nothing appeared. There was one picture that was in Spanish but it was misleading I tried to look into it to find out who the original inventor was found the person at XB Classics a Brazilian site. After conversating with him he told me that he had better pictures but he would not share. Then I noticed a site that they has linked where they were selling these to the equivalent of 40 US dollars a piece so that is the reason the images that they uploaded are just there to confuse people. So that they cannot make it. Does not include audio left or right. And apparently La stands for 5 V? Don't ask me but that's what the guy told me makes no sense at all. I spent two days getting the wiring correct. I documented everything and put it on a YouTube video (link2come) was trying to figure out the best way to make this readily available for everybody in the world any Xbox Enthusiast should have a low cost HDMI adapter solution available to them this is where these schematics come in. Again I didn't notice any interference at all. Just a little bit in the Bios when only running 480 but there's not much you can do unless you re Flash the BIOS to force. I've noticed people in the group posting pictures not even having soldering skills and getting very good results from this method. In theory you can use this exact same adapter in order to have an internal HDMI solution. These images are water marked because these are going to be the only good images that are online and I seen the way XB classic does their water mark and it really bugs me that they did that so I wanted to make sure that everyone knows where it came from. That being said I'm Mister James Reid really helped me out with this he volunteered his services in order to take my hard copy drawings that were on paper and make it look something presentable. Which he did and he did a great job thank you very much James I did in fact alter the images to have the watermark across them. Sorry about that but I figured since I put in the work I deserve to have my name on it. If you have any questions please do not hesitate I do not check this site every day but I do come in from time to time. Thanks again and I hope people online can use this receive money from the big corporations like pounds and hyperkin charging ridiculous amounts of money for something so cheap... I've also got a lot of questions recently about people asking if this is any better than component. It uses the component wires in order to transfer the signal into HDMI. I'm not too technical with that end but when looking up the chip number on the actual board for the Wii to HDMI adapter I did notice in there schematics and their breakdown for the actual board they did mention that the video board that does the decoding actually does video on hand splint what kind of video enhancement I have no idea. But it should be an enhancement over component if they are speaking the truth. Anyway gentleman without further delay here are the schematics. I hope this hope somebody somewhere. Thank you very much Frank- 198 replies
-
- 8
-
-
-
- original xbox hdmi drawings diagram schematic og
- wii2hdmi
- (and 14 more)
-
I live in the USA and need a few PAL power supplies for any model besides 1.6, I'd take 1 but would buy up to 3 if you have them available. Let me know if you can help!
-
Hi, I'm new to this forum, and I've always been a fan of the mugen game engine for creating 2d fighting games. What I bring you today is Xmugen created by me and I want to share them with you. If you have any doubts about how it is installed with pleasure, I guide you. regards World Warriors X Xmugen Capcom All Stars Xmugen The King of Fighters Xmugen Stay tuned, because I will be uploading more new xmugen Download all here: https://herecomesachallenger.wixsite.com/hcnc/xmugen
-
OK, new modder confused here. I've been spending my time fixing up dead and half dead boxes, and thought I'd see how setting up a new hard drive works with a hardmodded console. I used the OG Xbox Install disc to TSOP to Evox m8+ nodvd, wiped the stock HDD and installed UnleashX and the default apps, and it boots fine. However, now when I swap a different drive to set up (either a 10GB drive from another Xbox, or a WD 80GB drive) the box fails to boot from DVD. I've tried with two different DVD drives, but it's always the same... even the seeking sound the optical drives make are the same (they keep going forever in an identical repeating "pattern" until I switch the console off - no, not impatient, waited for 5-10 minutes). When I switch back to the original HDD, the system boots up fine from it, and also boots from the DVD drive - and the DVD drive sounds "healthy" again compared to previous attempts. I tried powering the bigger new HDD with an external power supply, since I noticed it was pulling more power on the 12V rail (thinking maybe the old PSU is just at its end), but this makes no difference. I've also tried jumpering the drive to cable select and master+slave, but still nothing. The original drive is a Seagate, both replacements were WD. Is there something I've overlooked?
-
Hi guys, first time posting here. So, I live in Brazil and the OG Xbox never got sold here. Recently bought one with a defective 110V PSU to attempt to repair and have currently reached a dead end trying to solve it. What I currently have is the following: ===PSU's PRIMARY SIDE=== - First filter cap (the really big one near) has a reading of approx. 170V. - When powering off, the voltage drains off filter cap normally. ===SECONDARY SIDE=== - No bulging caps, haven't recapped. Shorted VSTB to POW-ON to test and got the following: - 3.27V on VSTB to POW-ON, which I understand is what is needed. - 3.16V on VSTB to VS, which I think is low. - 5.3 on DNA1002D's pin 1, which I'm not sure is supposed to be that high. - 13.5V on the HV end of the optocouplers and little to nothing on the other end, which I think is wrong. - nothing on the pins for 5V nor 12V when shorting VSTB to POW-ON My best bet is the voltage is off on the secondary part of the PSU, maybe because of a faulty transistor or resistor (haven't found the fault) and POW-OK isn't triggering the feedback circuit, but I'm not entirely sure. I'm an amateur at best and know I shouldn't be attempting to repair a PSU with little knowledge, but am taking every precaution possible. Any help is much appreciated. Thanks!
-
I bought this modded big boi in 2005,here is the problem,in original Fable The Lost Chapter if i try to load save state my game will just freeze which will force me to restart xbox,game runs fine without loading save states,saving is also okay. Same problem occured in Call of Duty:Finest Hour,loading next map will almost always led to freeze,after restarting xbox map loads fine. Worst problem was in Kotor 1,xbox would just refuse to continue gaming after cutscene in the the Star Forge. I have EvoX if that matters. -
I'm bringing up my console collection to the modern ages... Or at least trying to keep them from wasting away in a pile of leaky capacitor fluid. I have a 1.4 OG that was modded with a Xenium Blue chip. Original HD, DVD, etc. Just modded to turn it into a media box back in the day. Prior to the restoration, I would get an initial green light, then flashing red light constantly. I've recapped the entire system, reflowed the LPC to the Xenium, and verified continuity. There was slight corrosion under the clock cap and a few of the CPU caps had bulged. Post-rehab, I can boot initially to the XeniumOS 1.0 menu. I have two old BIOS images available along with "Original BIOS", however when any of the options are selected the eject button LED goes from solid green immediately to a flashing red light. Two spin-ups of what I believe is the DVD drive, no video, no audio. Flashing red continues until a single press of the power button shuts down the system. Eject button works during this time. Component A/V cables will not work display the XeniumOS menu, but RCA cables will. I've seen another post on reddit discuss an EEPROM failure as the potential cause, and I'm starting to think that's most likely it. In the EEPROM tools section, the Game Region is "INVALID!" and cannot be flashed to another region. Before I go down the rabbit hole of procuring another EEROM, flashing, and reinstallation I wanted to see if anyone here had any other thoughts on the issue. I appreciate any insight you folks may have. Thanks!
-
Half-Life 2 - Episode One Xbox Port Update https://youtu.be/YgROkL4NXlQ
- 3 replies
-
- 1
-
-
- dust08
- corona2222
- (and 10 more)
-
Good evening, I'm trying to fix an xbox that I've bought online that states the "Your Xbox requires service" with no error code everytime I try to play a game. Weirdly there is one game that I'm able to play. A crappy demo CD with a few games, and I can only play the FIFA 2005! The xbox was unopened when I bought it and I already managed to debrief a few things, the DVD player is fine, the IDE cables that connect the DVD to the motherboard also seem fine (tested the dvd power connector for continuity on each pin). Since I'm able to use the main dashboard I can also access the hard drive, it lets me erase save's , so it seems that the xbox is able to read and write on the HDD. At this moment I'm not sure what to explore further , nothing too weird on the motherboard too, all caps seem fine. PSU doesn't seem to have any trouble too.. Any ideas? I'm lingering towards something in between the PATA and the MCPX.. but it seems like a longshot. Thanks in advance!
-
Hello everyone. I’ve modded a few Xbox 360s and want to take on the task of modding an original Xbox. I see a really good priced xbox but it’s in PAL format. My question is if I mod it with a stellar chip and HDMI+ will the console output in 1080i? I know the PAL format doesn’t support it. I know if I mod the console it won’t be region locked so I’ll be able to play ntsc games on it. If play NTSC games on the PAL modded system with HDMI will it support 1080i? Thanks for the help.
-
In this well descripted analysis, Markus Gaasedelen has managed to successfully dump the console's secret boot ROM by intercepting the Intel CPU's JTAG functionality with a custom made adapter. Its amazing to see discoveries appear here and there to this very day in 2023, since this can open the full capabilities of the hardware to many hobbyists and hardcore developers. Detailed explanation can be found here: https://blog.ret2.io/2023/08/09/jtag-hacking-the-original-xbox-2023/
-
Mainly the titel says it. I git a 360 today (pls don't throw old eggs at me for that :D ) which included a 512MB and a 256MB MU and i wonder if it would be possible to get one of those working on an OG XBox. Looks like both have a 5 pin design so there can't be that much of a different (except for the little "spacer" in the middle)?
-
I am mostly making this post to see what the best option is for me to enjoy my xbox for a much longer time. Like if my problem is the disc reader, but there are other options to get around even using it in the first place, I'm very open to it. I got a used Xbox a while ago but over the past few months I've been having to reboot games just to play them, and now it's to the point where the console can't even read them. The disc looks fine, but obviously it could not be fine. However, I think it's the drive itself. I've thought about just replacing the disc reader so I can use my games again, but recently I've been looking at mods and I'm curious about a few things. I think it's best for me to show my desires and then get a suggestion on what to do. I am willing to pay any price to keep enjoying the games I love, so cost is a non-issue. But I don't know much about what a modded Xbox is capable of. There's so much info on here, it's hard to digest. All I want is to play Corvette Racing and Sonic Mega Collection Plus. That is my only desire. Is there an Xbox mod where I can avoid using the disc reader and have the games on an SSD or hard drive? How can I verify that the disc reader is the problem, and it's not my discs? I have like ten games and they all give me the same error when I put them in, so I am leaning towards that the Xbox itself may be the issue. It would be cool to easily get more games or just use the discs to download them to whatever storage thing I have on the console. Then I can easily change games without having to get up and put in a new disc and I don't have to rely on a disc reader or having a scratched disc. Is this a thing or am I crazy?
-
The xbox dvd drive is SDG-605B version B it scratches discs. Refer to discScratches.JPG the scratches are not circular. I am trying to pin point the root cause of the damage. The xbox must of been dropped. The optical pickup head must be causing the scratches but I don't see any raised sharp edges that would cause those marks. The dvd drive reads both cd's and dvd's but they get damaged in the process. The xbox original is TSOP so the only use I have for the drive is formatting the hdd. I thought I would disassemble the dvd drive and compare it to an identical drive. https://drive.google.com/drive/folders/1B0_VHvgu-ACzN3azkw6Aq4r6GdUQbuLW?usp=drive_link A.JPG is the dvd drive scratching discs B.JPG is a reference drive identical to A.JPG -
Hello, I have a chipped Xbox with all the goodies: FTP access, 2TB hard drive, XBOX4gamers as default, etc... I'm the original owner and I never connected it to Xbox Live! I would like to connect it to Insignia but I believe that my dashboard needs an update... My dashboard version is 4817 How can I install V2 Xbox Live for Insignia? I already have an Insignia registration! THANK YOU! and have a good weekend! Also, my XBOX4gamers version is 1.2.122 and I can FTP to it but when I click the URL downloader updater is says no network access but I'm sure that it's connected to the internet! I just want to update the game trainers! any way to do that manually? Thanks again! -
Hi Guys. Stumbled across this beauty last week and i forgot i owned this. Shall i... Or shall i not.. still works perfectly however concerned about the clock cap itself. Is this a gem i should not tamper with or should i rip its guts out and get modding. I am torn here...!!!
-
Into quite a bit of a mystery here. Sold a fellow a modded Xbox and he traded in an old busted Xbox to save a few bucks so now I'm trying to fix it. When turned on the Xbox turns off pretty quickly but then restarts immediately, then the same again, turns off and then back on a third time and then stays on and shows flashing orange and red lights (the odd time it will flash red and green just to deepen the mystery). Googling the problem results in many ppl saying it's an 'av pack' issue if the av cable is not the problem but the restarting thing tells me it's more likely a PSU issue or a bios/mod-gone-wrong problem. Pulled everything apart completely, thought I found the problem with a burnt contact point near the plugin. Re-flowed all 4 points just to be sure and no difference at all. Kept googling and found a few encouraging leads including this url https://www.xbox-hq.com/html/xbox-tutorials-163.html#xboxerrorcodes1 and tried jumping that wire from the lpc pin 5. No f*ckin' joy. Also just a side note - the lpc vias are all plugged with solder (see pic) indicating that a modchip was removed at some point. Also I checked the solder points for the Xbox 1.0 TSOP and it looks like they've been done also - but the guy said he never modded that one. Thing is, the further into this I get the more convinced I am that this unit is fixable. Most people will just say eff it and chuck it or whatever but I really like to save old things if at all possible. I have included a pic of the wire I jumped (yellow wire) from the lpc pin 5 as the url tutorial suggested. The same pic also shows a mysterious blue wire that was here before I opened it. Asked the dude about the blue wire and he said no idea, never modded that one. In some of my Googling I found a post saying something about a D0 wire or DO wire described as a 'modchip enable wire', maybe this could be it? Any ideas about how to move forward or what the blue wire is for would be great, my thanks go out to anyone who has any ideas that might help,
-
I have just found an Xbox v1.1 during a unit clearance so I have no idea of the history. The unit powers on for a few seconds and powers down again, it is flashing just orange and the fan is at full speed. The 5 3300uF caps by the power supply connector have been swapped but no other signs of soldering that I can see on the LPC port or anywhere else. It had a leaking battery cap but only minor. I have removed it, washed the corrosion of with vinegar and then isopropyl but no change. I can't see any broken traces and I have belled the long traces underneath on the front edge (I have read these area common failure) but they are OK. The advice online seems to be that it is a mod problem. Clearly it hasn't been hard modded. It may have a softmod gone wrong so perhaps putting in a modchip might be a good idea so the XBOX has a known working BIOS. Any ideas would be appreciated. Thanks...
-
Greetings, I am encountering a problem on Xbox. The Xbox app does not detect the gaming service. I have no idea what could be he issue. Could anyone please help?
-
Trying to rip my DVDs using a 2nd hand BenQ I picked up from eBay and flashed with 0800. XBBC recognizes it and unlocks it successfully but whenever I try to read the disk it crashes after reading ~500kb. No error, it just closes. Anyone can maybe give a few clues? Thanks.
-
Running in 720p (Only menu)
-
Requirements: Single CAT5 ethernet cable. PC with an ethernet port. Xbox console. Configuring the network adapter: Connect one end of the ethernet cable to your Xbox and then the other end on the back of your PC's ethernet port. Go to 'Network and Sharing Centre' and select the first current Wi-Fi connection. Select 'Properties' > 'Sharing' and check the box labelled 'Allow other users to connect through this computer's network'. If there is more than one connection in the drop-down list, then select 'Ethernet' and click 'OK' twice. Next, select the ethernet connection. Select 'Properties', check the box labelled 'Internet Protocol Version 4' then select properties. From the properties window, make the following changes: IP address: 192.168.0.1 Subnet mask: 255.255.255.0 Default gateway: 192.168.0.100 Once you've made the following changes, click "OK" twice. Download WinSCP or FileZilla, any client will do, which will be used to connect to your Xbox. Setting up network configuration on Xbox: (This section will only be focusing on setting up FTP for UnleashX, your dashboard may follow a different setup). From the UnleashX dashboard, select 'Xbox Admin' > 'System' > 'Settings' > 'Network'. Make the following changes in the 'Network' section: Type: Static IP address: 192.168.0.2 Subnet mask: 255.255.255.0 Gateway: 192.168.0.100 DNS 1 & 2: 0.0.0.0 Press 'B' once, when you are asked if you want to make changes to the configuration, select 'Yes'. Go back four times using the 'B' button, then scroll down and select 'Reboot'. Once the system reboots, the new static IP address will show up in the bottom-right corner of the screen. Connecting to your Xbox: To confirm that everything works, open up the FTP client of your choice that you have installed. Enter the IP address of your Xbox, set the port to '21' and click 'Connect' or something similar in your client. When asked for both a username and password, the defaults are 'xbox' (no quotations).
Board Life Status
Board startup date: April 23, 2017 12:45:48