Search the Community

Don't feel like taking off my panel to check, but I coulda sworn I saw a pcb in front of the ir window on my Control Panel. Do I just have to get a compatible remote?

So, I can't download anything until 15 posts, so I have a question. I think my v1.0 ide hard drive is dying...I was playing dance dance and the system became very slow and sluggish to dance pad presses. (The pad worked fine on the ps2) I did open up the xbox console for the first time, cleaned up the board, chopped out the clock capacitor (a very small amount of leakage), applied new thermal paste to the chips. The fans seemed like they were functioning fine. But..... I'm curious about the hard drive. Can I just clone the hard drive to a new hard drive and call it a day? Must I hard or soft mod the system before putting in a new hard drive?

There is a new program called Pandora by Team Resuegent You can use Pandora to browse and download files from xbins. No false positives anymore with auto-xbins and the windows virus scanner. It supports windows, osx and linux You can find the program here: https://github.com/Team-Resurgent/Pandora

Just being curious - i´m struggling with the "Hotplug"- Method in combination with an rather old USB IDE Enclosure (i suppose its from the early XP Times). Things i´ve done so far: While the XBOX HDD (WD80 with 10GB) is attached to it, things get extremely worse on my W7/Linux-PC. Its shown in the Device Manager/Drives as WD80, but not via WMIC, so Tools wont´t find the HDD at all. Hdparm (here /dev/sdc) would not resume and stalls the entire System. W7/Linux won´t shut down as long the Enclose is attached, neither does the PC boot (BIOS ginves me a B4 error, means USB Hotplug error). As soon as i power off the Enclosure/remove it, things will resume. Same happens when the drive is unlocked by the XBOX and hotswapped. But every other IDE drive in the Enclosure works fine. I understand that ATA Security could probably stall that old the Microcontroller in the Enclosure (somehow a 7.5 MHz RISC Controller), but i think as soon the drive is unlocked, this shouldn´t be a problem at all. -Or- the MC somehow resets the HDD again before it tries to obtain the drive data and the HDD is falling back to the point where ATA Security gets in Place, but i think the controller might have at least the ability to read out the drive data (Brand, Name etc) . Of course the Enclosure has always power while Hotswapping. Removing the jumper on the HDD (from Cable Select to Master) doesn´t do it. I got the Key for the HDD via my logic analyzer and its I2C Protocol Analyzer (Key has to be tried out). If things get completely worse, i could try to program an MC by myself and attach the drive to it in order to unlock it via Serial Commands (and remove the lock permanently, as well lock it again). But i think thats too much work. Done a AVR IDE/FAT32-Driver more than fifteen years ago (of course sources are lost by now), but somehow i won´t fiddle around again for only one purpose. I have another Seagate Spare IDE drive with 20 GB, which i could fit in the XBOX and try it to lock via the enclosure (if it does accept the command), but idk where or where to obtain the neccessary OS-files (including Softmod and the ability to connect to the XBOX via LAN/FTP, as well as a driver, wchih allows Access to a USB-Stick attached to a mechanically modified controller port). I understand that there have to be at least two Partition, C and E, but idk which FS (xfat?) etc. Any help is greatly appreciated ! Best regards Stef

Picked up a brand new X3 today. Honestly didn't expect to find an unused one at this point. Think this one may stay in the box.

Hello everyone, Sorry if this is in the wrong place but as the title says, I'm relatively new to the OG Xbox, it's an awesome console but seems to be pretty complex as well. I have a softmodded 1.6 Xbox. The first issue/question I have is when I turn the console on, it boots in 4:3 and SD even though it's connected with a Chimeric HDMI adapter, also in some guys like 007 Nightfire, it's pretty blurry almost like it's running in SD, is this an issue with 1.6 Xboxes? If that is an issue with 1.6 consoles, whether it's because of the Xcaliber encoder or whatever, what is the best revision to use on HDTV's with HDMI adapters like the Chimeric one or the Xedusa? Thanks to anyone who can help!

Hello all! I use to be really into the mods back in the days. I shared a lot of hardware info and came up with a easy to build Eprom reader to get the Hdd KEYS out of the bios chip storage. I recently pulled out 4 Xboxes that I had squirreled away for future projects, I saw this on a YouTube video and thought, wow people are still into modding the old Xbox! Good to meet all of you!

^

I've a Xbox with 1.4 board, softmodded with Rocky5's Xbox Softmodding Tool. It doesn't have the clock capacitor anymore. The console was working for a while until for some moment the power button doesn't respond to turn on the console and needed to use the eject button for it. And it automatically boot up when you shut it down in software or when the power cord was plugged out and back in. But all this only happen when the console is warm (=when played games for a while). If it's cold, the power button works fine. I thought it was the trace corrosion mentioned on the forum, but I took the board out to have a look on it and the traces seem to look fine, no corrosion. After I put it back together the problem still exist and even getting worse: when it's cold everything works fine, but after playing a game for about 30min it will shutdown itself and the power button problem returns. And when restarted with the eject button, sometimes it keeps working for some minutes but most of the time it shuts down after some seconds, just before or right after the dashboard is loaded. But if I let is rest for some hours, everything will get back working for some (short) time. What can be the cause of these "trace corrosion"-like symptoms, but only when the console is warm/played some games?

i've seen some bad info out there for noobs trying to mod a xbox for the first time. the 2 main ones are to null or modify your hdd key(without disclosing any of the dangers) instead of just keeping the old hdd as a backup to create another drive if needed and the 2nd one is to pry the gpu heat sink off. please don't do this, especially on a xbox that has sentimental value to u. this is a good way to ruin it. we really need to start being more careful what we tell noobs to do. i know my original xbox has a lot of sentimental value to me because it still has the game saves from where i used to go to lan parties with it back in the mid 2000's. i'd be heart broken if one of these guides caused me to ruin it. many other would probably feel the same way about theirs.

Running in 720p (Only menu)

i see the open xenuims have gotten expensive. what's the best to use now?

i'm having issues with this newest one and don't care for some of the ui changes. how can i revert the dashboard to the previous version? the xbox is hard modded with an open xenuim chip.

Hello! I know there is a beta version of FATXplorer available and it supports the original Xbox. Is there any good tutorials on how to get started? Other than plugging in my OG Xbox hdd into my computer with FATXplorer running that is as far as I got. Nothing showed up for a drive to use so hopefully I'm missing a super simple step to get started.

Hello everyone!, Blz? I'm doing a port of "The Orange Box" For OG Xbox using the official port of HALF-LIFE 2, The Project is already 90% finished and I'm in the last step which is REPACKAGE the files to .XZP (Only)....... In it will include; HALF-LIFE 2 (With some improvements), EPISODE ONE, EPISODE TWO AND PORTAL.... Does not contain TEAM FORTRESS 2 due to Xbox being too weak for it If someone help me create a repackager of .XZP files the game will be completed, anyone available?

on one of my hard modded xbox's, i have a 3tb sata3 seagate drive. it has almost every xbox game ever made and some extra stuff too. i have the dashboard set for xbmc4gamers and fast parsing but it loads so slow. i have found that to be the fastest dashboard though. on my softmodded xbox, i upgraded the drive to a 300gb ide seagate drive and the same ide cable. i only have mostly the games that are available with insignia right now plus a few others and it loads to the unleashX dashboard. it loads SOO much faster, even with that old slow ide hdd in it, that i am tempted to use it instead of my hard modded system with all the extra's on it. is there anyway to speed up my hard modded xbox without deleting a bunch of games? i have another hardmodded xbox with a 2tb wd black 7200rpm drive and it only loads 4 seconds quicker(i timed it several time) so a faster harddrive wouldn't help much.

haven't used my xbox's in a while. been recently trying them with insignia though. on one of my hardmodded xbox, i have xbmc4gamers as my homescreen. when i go to the down loader to try and download anything i always get some type of urlloader error. this even happens when i select the updater. please help.

Razor here just checking in, Who's keen for Insignia!

Bought a XBox with SmartXX v2 some days ago and it had a to me unknow rebuild soldered in : Pictures Anyone ( @KaosEngineer ) has any info on that board or can tell my it is so different?

Okay, what is going on these days? Where are all the modchips? We had the OpenXenium being mass produced and sold just a short while ago, but this chip can now be only found on eBay and what not. Stellar is coming, but it's a bit expensive. Why is the crap-ass Aladdin, which has some serious flashing issues and no bios management... OR more than 256k of storage, the ONLY chip that's still being mass produced? Am I missing something?

How to fix the 4 screens bug when patching to 720p in OGXHD

I have been trying many combintations based on info found here, but still cannot get the dash to see G: Drive. I have a 1.6 with an original X2.6 Install, and a 2tb drive with the Origin Image (Only becuase I wanted to get things setup and back into OG Xbox) I have been using bios' downloaded from the right sources, and uploading them via ethernet with flashbios always on bank 1&2. I have tried the following either modified with EVTool (for 256k) or X2ool for the Xecuter bios (5035 512k) I try to mod the bios for LBA support, but its not happening. I think there maybe an issue with the programs above and compatability/admin rights?? So far I have tried: x2_5035_v16plus_512k modified with X2ool M8plus_16 modified with EVTool (1.0.8) M8_16_LBA48_IGR_C-06 modified with EVTool (1.0.8) The last one I really expected to work......I've not played with any partition tools as I was concerned that I might loose data. Finally, I've not tried any of the installation DVD's as the drives dont seem to be working.....

You all know, that I'm such a tease (That's no secret right? ) so, here are some of the new chips I added to my collection. Images : https://imgur.com/a/DKaO13U

what is the modchip Aladdin version ???

whiel i stated in my introduction post i had a Modded OG from the late 2000's to just about 2 years ago, i kinda kept to a handful of emulators (didnt wind up updating much)and played a few HDD Ready games. used it up till i got a RaspberryPi 3 for a Media Center. I Just recently snagged another OGXbox and upgraded it's HDD, i'm blind pretty much to what's changed in the intervening years. whats the best way to approach Emulation now? has there been any decent Homebrew games? outside Youtube, has any other Media service been restored? (Netflix/Plex) (i've got a nice Huge CRT TV to set this Xbox up with..)