Jump to content
OGXbox.com

Marty

Members
 View Profile  See their activity

  • Posts

    387

  • Joined

  • Last visited

  • Days Won

    9

 Content Type 

Everything posted by Marty

  1. Marty
    I believe GoTeamScotch is well acquainted with TL Gamer's "unique perspectives".
  2. Marty
    This was nice, but TL Gamer's trail of unhinged, mentally ill rants on the XBMX4Xbox forums are ~~~chef's kiss~~~ legendary . He's actually deleted and taken down much of his online sperg-outs. If you didn't know any better, you'd think he was doing some elaborate troll job. But shockingly, he really is like that.
  3. Marty
    If you're going to test caps, they shouldn't be soldered to the motherboard.
  4. Marty
    Color me skeptical that two 80mm fans blowing down on one section of the motherboard...and then being exhausted out the back by a tiny 60mm fan....doesn't sound like two raccoons fighting over pizza crusts in a metal garbage bin.
  5. Marty
    The voltage drop is on the motherboard side. I would check the capacitors.
  6. Marty
    That would be my choice.
  7. Marty
    just so
  8. Marty
    I would check for a loose soldered wire on the X3.
  9. Marty
    Not sure what your goal was in removing all those components....
  10. Marty
    Post of picture of the motherboard.
  11. Marty
    Buy a USB 3.5" hard drive enclosure. It's useful for a lot of things. If you buy a two-bay enclosure, you can easily clone drives.
  12. Marty
    I doubt that. Although too much thermal paste isn't a good idea, the clamping pressure of the heatsink retention clip should force most of the paste away from the die.
  13. Marty
  14. Marty
    He should buy one of your tricked-out XBOX's (with a flashed Aladdin XT).
  15. Marty
    I have 80pin cables with all holes open. But all PATA devices have the tab and the missing pin. It's so that you can key the cable in without putting it on upside down accidentally.
  16. Marty
    No it doesn't.
  17. Marty
    dude....
  18. Marty
    No, they don't. Are you looking at a SCSI cable or something else?
  19. Marty
    A little research goes a long way.
  20. Marty
    These were built with the understand that their use would be primarily in PC's, where you would have full channel configuration available through the BIOS.
  21. Marty
    Some do. Some don't. With the cheaper adapters, you're playing the lottery. If you find something that works and you're happy with it, stick with that.
  22. Marty
    That might be a problem. Also, Slayer's is horribly out of date. Use Hexen's or OGXBOX Installer instead.
  23. Marty
    Nice. Unfortunately it's not the 8160B like the one I have.
  24. Marty
    Yeah....some pics would help.
  25. Marty
    I'm sorry, it's not clear. Where are you getting your 3.3v from?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept