Jump to content
OGXbox.com

Ging3rguy

Members
 View Profile  See their activity

  • Posts

    837

  • Joined

  • Last visited

  • Days Won

    11

 Content Type 

Everything posted by Ging3rguy

  1. Ging3rguy

    Noob Hdd Dead

    Ging3rguy replied to Yanimo's topic in Repair

    Hi, is it modded, if so is it a hard or soft mod?
  2. Ging3rguy
    copied this from another thread. If it’s not your soldering or the psu it must be down to trace corrosion.
  3. Ging3rguy
    Have checked the voltages from the psu?
  4. Ging3rguy
    I would load them in batches or by letter then run the installer so you can check them as you go.
  5. Ging3rguy
    Do you know if all of your games work as a dodgy .xbe file can make it hang? It will also take quite a while to scan a fully loaded 2tb hdd!
  6. Ging3rguy
    Hi, the picture is pretty confusing as it is taken from below with different numbering, here’s a pic of the lpc from the top of the board and has the conventional numbering. Pin 12, actually pin 2 is ground.
  7. Ging3rguy
    Try clearing your cache folders, how large is your hdd and how many games are you trying to scan?
  8. Ging3rguy
    As hd pointed out for pin 4 in the photo, if you follow the trace the pink circle should be 1 to the right.
  9. Ging3rguy
    The D0 is connected to ground at the moment so if you remove that it shouldn’t frag, is the bt point solderEd correctly on the chip?
  10. Ging3rguy
    When you downloaded the installer it just asks you for a destination folder and you just navigate to e:apps. it then downloads and extracts.
  11. Ging3rguy
    I am using the other version. When I set it up originally I used urldownloader to install the beta version of xbmc4gamers, then I downloaded the installer and set a path to e: apps, it downloaded, extracted and then I went into apps and chose auto.
  12. Ging3rguy
    Which version of the installer are you using? Maybe try deleting the version you have and try the other or try loading manually.
  13. Ging3rguy
    Did you use the urldownloader to install it and how are you launching it?
  14. Ging3rguy
    Are you trying to play original or backup disks? Modchip choice if you want something new would be an Aladdin, basic but does the job. If you want a chip that can have multiple or larger bios and can be used with a lcd screen go for a openxenium. 2nd hand modchips are available cost and quality varies.
  15. Ging3rguy
    Make sure you are getting a good connection with the pins. I ended up soldering in a pinheader the 1st time I used it as I was not be getting a good connection. also type out the command line in notepad and then use copy and paste into cmd, saves keep typing it out!
  16. Ging3rguy
    What is the resistance from the pin to the end of the trace, if you can do it safely what voltage are you getting at the end of the trace.
  17. Ging3rguy
    Hi, just from looking at the photo image it does go to the one you have ringed and if it bells out I think that confirms it, unless you have a major short going on.
  18. Ging3rguy
    If you have xISOs backed up on a pc you can rip them to your Xbox’s hdd using qwix. It can also make xISOs from hdd folders. https://www.reddit.com/r/originalxbox/wiki/qwix?utm_source=share&utm_medium=ios_app&utm_name=iossmf
  19. Ging3rguy
    As long as they are hdd ready rips you should be fine, just put them in a folder called games on f or g.
  20. Ging3rguy
    How are you trying to load to your hdd, are you ripping disks or ftping game files?
  21. Ging3rguy
    Here's a picture for the size comparison but as Dave points out they’re not cheap but you don’t need to trim them.
  22. Ging3rguy
    Hi, ryzee has a work around for this but you would need a tsop with it as you lose the ability to run a custom bios. https://github.com/Ryzee119/AladdinLCD
  23. Ging3rguy
    If you don’t mind spending the extra go for a crystalfontz, you will not need to cut away as much of the metalwork and makes it easier to keep ports 3 & 4. https://www.crystalfontz.com/product/cfah2004ktmijp-lcd-character-module-20x4
  24. Ging3rguy
    shutdown (triggers + black + white) tray eject (triggers + right thumb + dpad up) tray close ( triggers + right thumb + dpad down) power cycle ( triggers + back + x + black) restart current disk (triggers + back + start) posted again as pasteing black on black is a bit tricky to read.
  25. Ging3rguy
    If you use ind-bios you get a few different igr options, borrowed this list from a thread on xbmx4xbox by Rocky5. Shutdown (Triggers + Back + White) Tray Eject (Triggers + Right Thumb + Dpad UP) Tray Close (Triggers + Right Thumb + Dpad DOWN) Power Cycle (Triggers + Back + X + Black) Soft reset to dashboard (Triggers + Back + Black) Restart current disc (Triggers + Back + start)

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept