Frank D'Agostino

I took it upon myself to put the adapter I made against the pound Link cable. Personally I can't notice a difference. Thousand different people would say a thousand different things I will look fast forward to 15 minutes 10 seconds to see split screen!

Here is a link to the YouTube video walking you through step-by-step. I hope this is useful if I helped one person I have succeeded... also for some reason if there is some sort of interference I seen a gentleman put A-10 microfarad capacitor in line with the 5volt rail.. Thank you

Took me 2 days to get all the wiring right. for the wii2hdmi for og xbox modd ... using a wii2hdmi device ordered off eBay you can also find an Alibaba and other places like this. Very inexpensive around 5 Canadian dollars. You're also going to need some sort of a donor Xbox RCA wires or component wires in order to pull this off. There is 11 connections total five of which are ground I do not suggest not adding all the ground cuz could cause interference. Had pretty good luck I made to both of them are crystal clear with no interference. I tested on version 1.0 as well as version 1.4 turned out very good. I tried to look up and down online for some sort of schematic nothing appeared. There was one picture that was in Spanish but it was misleading I tried to look into it to find out who the original inventor was found the person at XB Classics a Brazilian site. After conversating with him he told me that he had better pictures but he would not share. Then I noticed a site that they has linked where they were selling these to the equivalent of 40 US dollars a piece so that is the reason the images that they uploaded are just there to confuse people. So that they cannot make it. Does not include audio left or right. And apparently La stands for 5 V? Don't ask me but that's what the guy told me makes no sense at all. I spent two days getting the wiring correct. I documented everything and put it on a YouTube video (link2come) was trying to figure out the best way to make this readily available for everybody in the world any Xbox Enthusiast should have a low cost HDMI adapter solution available to them this is where these schematics come in. Again I didn't notice any interference at all. Just a little bit in the Bios when only running 480 but there's not much you can do unless you re Flash the BIOS to force. I've noticed people in the group posting pictures not even having soldering skills and getting very good results from this method. In theory you can use this exact same adapter in order to have an internal HDMI solution. These images are water marked because these are going to be the only good images that are online and I seen the way XB classic does their water mark and it really bugs me that they did that so I wanted to make sure that everyone knows where it came from. That being said I'm Mister James Reid really helped me out with this he volunteered his services in order to take my hard copy drawings that were on paper and make it look something presentable. Which he did and he did a great job thank you very much James I did in fact alter the images to have the watermark across them. Sorry about that but I figured since I put in the work I deserve to have my name on it. If you have any questions please do not hesitate I do not check this site every day but I do come in from time to time. Thanks again and I hope people online can use this receive money from the big corporations like pounds and hyperkin charging ridiculous amounts of money for something so cheap... I've also got a lot of questions recently about people asking if this is any better than component. It uses the component wires in order to transfer the signal into HDMI. I'm not too technical with that end but when looking up the chip number on the actual board for the Wii to HDMI adapter I did notice in there schematics and their breakdown for the actual board they did mention that the video board that does the decoding actually does video on hand splint what kind of video enhancement I have no idea. But it should be an enhancement over component if they are speaking the truth. Anyway gentleman without further delay here are the schematics. I hope this hope somebody somewhere. Thank you very much Frank

Unfortunately I do not the guy I got my orange memory card showed me that he showed me it was like a CD holder that said Xbox on it it was a soft CD holder hand size. And he also had a betta shirt said Xbox Live tester on the shirt

Actually there were a couple extra skins made I made one and my friend made another one from an old skin that was actually in a competition back in the day the winner of the skin one $500 cash. When I get sometime I will post a link.. attached is the image of the custom one that I made. I title it arcade. Link to soon come

I have a blue chip here good working condition. The real deal not no fake bulshit. I want a little bit more than the last guy though 65 sounds fair. Can even burn you a copy of the recovery disk in order to wipe the chip if you want to and start off fresh. It was installed on a version 1.4 Xbox. Can also give you pin header. You're going to have to solder a wire from the DO to the chip. The chip has never been soldered before. It had one of those Pogo pin Style quick swap adapters that I need to keep. 65 American gets it shipped with tracking. Message me for more information and more pictures. If you're on Facebook even easier to message me through there. Thank you

Okay I fired up the old Xbox with the original chip. Very simple in the root of E partition need to make a folder called XENIUMOS .. within that folder you need to make another folder titled SKINS ... inside of that folder you can put the five skins. This should work 100% because I'm looking at the Xbox that is powered on that I pulled the skins off of..thank you. And you don't have to make them Capital to all lowercase letters are fine... so it should look something like this E/XENIUMOS/SKINS/PUT SKINS HERE!! Pictures below for reference

I thought it came with some sort of CD holder as well. Like a little soft binder that holds discs

Looking good

Hey buddy I made all these images myself. I use 3D paint with Windows 10. My editing skills at the time were terrible I use whatever I found online. So putting the border around the image yes I made that..

This was tested with unleash X as well as XBMC 3 5 3. Emulationstation was never tested with these games. But these games do run good with emulationstation. Everything that was tested was just thrown into the emulator like any other emulator nothing was configured. That would literally take me months. For now there's a good list of at least 35 games that's floating around better than what was available before

Anyway u can make one like this for xenium blue aswell Thank u

Does anybody have wiring schematics or LCD from X3 to 44780LCD? Thank u

Great useful information great job. Would be awesome if you could do one for executor 2.6ce Keep up the great work

I'd be nice if you guys had any if you guys could share as well to this thread.

recently got a debug kit I have been trying to look for ways on how to FTP 2 debug kit. The only media this would read that will allow you to FTP is the dashboard Avalanche. These were made on the Old Source codes that's why it can read it. But you really want the Alpha version it's a special version (Alpha v0.49.1) This is the only Dash or program this debug kit will play. Once it boots up go into file manager using the CD to get there. Copy files from DVD drive into the E partition you can make a folder call it apps and place individually everything on the contents of the CD you made... once that is done you can reboot the system open Avalanche go into FTP settings. You want to change your IP address to whatever you have on flashfxp or Windows .. once you are linked you can pull off any programs that you want to make a copy for yourself. Another thing you can do is download an app called retail game loader V 1.20. This app will allow you to play retail games as well as emulators or anything the original Modded Xbox can play. How you use it is once you FTP to hard drive and is complete reset the system then under xdk launcher click on the newly installed app retail disc loader V 1.20... once that is launched it will look like the exact same Dash except now you can load anything you want. I was giving a lot of help from a lot of different sources in order to make this post to this form. Please if you know any other tricks leave a comment below if not this will work for sure I've tried it myself 100%. Thank you very much for reading have a great Frankie d

Okay I found a debug console in Toronto Ontario. The guy mentioned to me that it had Call of Cthulhu which is nowadays getting a little bit up there in value compared to other Xbox games. This post is more of a question I'm wondering if anybody has seen another different copy of Call of Cthulhu besides the retail disc game. For example Call of Cthulhu retail game size is 3.16 GB.... the version I found on this debug kit is 2.34 GB. There's a difference in size there. Not only that but once you enter the game and you select your level of difficulty it brings up a small screen on the right hand side overlaying the graphics the fonts are very hard to see and our kind of messy looking with underscores and lowercase letters. Very hard to see but this will allow you to pick a level in the game. I have confirmed this I've tried it. Just wondering if this game has ever been released before in the Xbox world or if this is a debug Edition Call of Cthulhu? Attached are some images of stage select as well as size on hard drive.... if anyone can confirm that they've seen this version or if they can confirm that they've never seen this version before would be appreciated. Thank you for reading

If you really want to test the power supply unplug the Molex connector going to the hard drive. Turn on the system use a Multimeter one and black one in yellow if it reads 12 volts then it's good period one in black one in red if it reads 5 volts and it's good if it's off of half a volt or I would be concerned.. I've noticed in my own experience a lot of the 1.6 revisions have issues with the capacitors around the CPU processor. Close to where the power supply plugs into the main board. There's either three or five of the same capacitors. 3300 micro ferrets at 6.3 volts. And I've also seen revisions having 1500 microfarads at 6.3 volts. I would take a look at that as well

When doing a ram upgrade aren't you supposed to install for chips? Two on top two on bottom?

I was really only looking for a screen only not a front plate... throw me a private message of what you're asking for the unit. I need to know more details I really don't know what these go for you probably have a better idea than I do. Let me know thanks for the response

For Unleashed X I would use green shapes by kthulhu

XeniumOS skins.7z

Picked up a $5 Xbox off of local buy and sell site in Ontario Canada. Got the Xbox working notice it had a modchip got the modchip working it was a xenium chip.. when I was in the mod chip options I noticed that there was a bunch of skins five in total. I contacted a few of my friends who told me that these are very hard to come across some may even say rare. So now I upload to everyone in the forms here. Please download and enjoy these beautiful hard to find skins. And please share and pass these around. Use 7-Zip to unzip Thank u Frank

Picked up a $5 Xbox off of local buy and sell site in Ontario Canada. Got the Xbox working notice it had a modchip got the modchip working it was a xenium chip.. when I was in the mod chip options I noticed that there was a bunch of skins five in total. I contacted a few of my friends who told me that these are very hard to come across some may even say rare. So now I upload to everyone in the forms here. Please download and enjoy these beautiful hard to find skins. And please share and pass these around. Thank u Frank XeniumOS skins.7z

Came across a beautiful selection of wiring diagrams for a bunch of commonly found mod chips. These images are in high-quality HD very easy to read can be downloaded and zoomed in to read perfectly. I am not the Creator of these pictures. The Creator is YouTube channel techno on top. This person normally does Xbox mods on YouTube. There's a video where he shows each of these pictures for 1 minute. I merely took a screenshot of each. Thought it would help out the community here. In any event I hope somebody could use these images. Please pass them around and enjoy Wiring Diagram More common Hardmod Chips.7z