-
Posts
123 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Store
Everything posted by SylverReZ
-
My apologies for replying to a 4-year old thread. Would've been nice if you could've neaten the traces instead of making them look crooked, but its a good 1:1 near identical clone nonetheless.
-
Likely the CPLD is getting hot because its faulty. Its a good idea to swap it out with a donor or new chip, then reflash with the OpenXenium SVF code.
- 17 replies
-
- openxenium
- open
-
(and 3 more)
Tagged with:
-
Yes. The fabricated PCB will already have this connected, so no wire is required.
-
The red wire connection was added by me because I accidentally forgot to add pin 29 and 28 to GND. Double check your soldering connections on the LPC header and reflow, then try again.
-
Did you position the modchip correctly as the diagram shows? (don't worry about the wire, this board was in near-final stages) The chip must be placed below the pin header. Since your console is a 1.6, you should ensure that pin 4 on the LPC isn't connected to anything and that the LPC port has been rebuilt.
-
You have a fake 49LF020 chip, which frankly does not work with cheapmods. This is why I would recommend you to buy the chips from here: https://www.ebay.co.uk/itm/124518077957
-
Hello Kitty Crystal Xbox Complete Set for sale! VERY RARE EDITION!
SylverReZ replied to Tasuofrivia's topic in For Sale
Its insane how simply a crystal Xbox with a decal stuck on-top would be around thousands of dollars. -
@bot_1 If you're still online, could you DM me the key for the download? It would be a better idea if you posted the files to Archive; rather than leaving it lost forever.
-
It's surprising to think how the reception before was quite mixed, when some thought that it wasn't possible to use a cheapmod on a 1.6-revision Xbox. Well, the good news is that you can, thankfully.
-
Make a new thread about it. This is about WHY Cerbios has 'Hybrid' in its name.
-
On second thought, its also for Retail and Debug units all-in-one.
-
Its named 'Hybrid' because it will work on all Xbox revisions from 1.0 - 1.6.
-
Can't wait for this piece of kit.
- 17 replies
-
- xeniummods
- v3.x
-
(and 2 more)
Tagged with:
-
Luckily, I've finally managed to do it. All I had to do was flash the X2 5035 BIOS onto my PrometheOS installation, copy my logo onto my E drive, and then it shows. Thanks guys for your help. This thread can now be closed.
-
Most likely your Xbox is fragging. Double-check that you've soldered the pin header correctly.
-
The cheap PLCC32 DIP adapters have a poor-quality socket, which doesn't latch onto the pins correctly. Normally, I would have to slightly bend the pins on either the chip or the socket to get it to work. Most of the early Aladdin chips often use a 49LF020 chip (not A or B), later ones do have the A or B variants of those chips.
-
That is a 29-wire Ownmod, uses a similar diagram to the Enigmah and Xtender chips. I highly recommend you swap this out with something more modern and clean, such as an OpenXenium chip.
-
I'm trying to modify the logo inside of the BIOS, not make an INI config file to locate a custom logo bitmap with the X3 BIOS.
-
I would like to know if there's any way of extracting and then injecting a custom Microsoft logo into the Xbox BIOS, usually its "xboxkrnl.exe" I may be wrong.
-
Thank you, this is far more helpful. Here's the updated TOR link if anybody is looking. http://gd6is466quuhsgzbztyv4sjswdhgfii63wf54qsb32v27xmm5dxbtmid.onion/eur.html
Board Life Status
Board startup date: April 23, 2017 12:45:48