Jump to content
OGXbox.com

dtomcat

Moderators
  • Posts

    817
  • Joined

  • Last visited

  • Days Won

    23

Everything posted by dtomcat

  1. I would NEVER sell a modchip that looked like that!!!
  2. On black screen… have you tried pulling video cable out and plugging it back in?
  3. That’s why I quoted it. I knew that but some may not understand extruded so left it in lame terms but quoted it since it’s not exactly etched.
  4. They are “etched” into prints
  5. 8 remain (no more will be made by me)
  6. A you try to get a really clear close up picture of the LPC soldering. We may see something.
  7. What temperature do you have your sooldering iron set to? What type of solder?
  8. So the FRAGing (flashing red and green) when d0 is grounded means it is either the soldering (probable) or bad chip. Your soldering after second time looks better… but could still be the issue. I hesitate asking you to keep trying because you could burn up the pads with too much heat. You really need some flux. I wouldn’t recommend trying without flux. Is the hard drive locked? Do you have an EEPROM backup?
  9. Error 16 can be that the Xbox dashboard can’t load to set the clock
  10. And are you sure that the new hdd has stock dashboard correctly moved onto new drive?
  11. Have you tried putting d0 to ground and see if chip boots?
  12. I’d recommend getting some flux and try to get the LPC soldering a lot better
  13. Do you get the error without the mod chip installed? And the LPC soldering needs some work. Not sure it’s making good enough connections on some of the pins
  14. Pictures of everything will help
  15. Nah… that’s chump change!!! https://www.ebay.com/itm/134981254051?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GXGiHKLYSR-&sssrc=4429486&ssuid=wNf3z91vRd-&var=&widget_ver=artemis&media=COPY
  16. Yep! I have a board someone sent me that I still need to do (been months… sorry). Having a baby has stole so much me time lol
  17. Not that I’m aware of. You could sand one down and scan it… and recreate it inside KiCad
  18. Previous page (scan). I’ve not come across the PCBs
  19. https://bitbuilt.net/forums/index.php?threads/xbox-dvd-remote-scan.5917/

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.