Jump to content
OGXbox.com

HackDaBox!

Members
  • Posts

    8
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

HackDaBox!'s Achievements

Newbie

Newbie (1/14)

  • Reacting Well Rare
  • Dedicated Rare
  • First Post
  • Week One Done
  • One Month Later

Recent Badges

4

Reputation

  1. @sweetdarkdestiny can you double check your evox.ini file as I think I found mistakes were the YESDVD was flashed instead of the NODVD evoxm8 plus bios which is causing issues after flashing with your installer disc. Then make a new version with the errors fixed please.
  2. @sweetdarkdestiny Okay so I think I found a problem. I’m looking in my apps folder and I have flashbios and in the evox.ini file there are a couple of mistakes only relating to evoxm8+NoDvd. It will display NoDvd but actually flashes Yes DVD regardless on 256 or 512k bios as the error has been copied and pasted. if you open the .ini file in UnleashX the first error can be seen at line 1443 col 82 ! hope this helps and if I am correct can be updated just some people said they had trouble flashing a NoDvd bios and it still would not boot without the DVD Well even when choosing NoDvd it flashes YesDvd ! the error is only in Evoxm8+ with Evolution-X dashboard also cee are okay just the ece are affected Hope this helps
  3. Thanks guys I will delete my account. Have a nice day.
  4. HackDaBox's Tutorials - Networking Ok here is a basic Networking guide to get you up and running as easy as possible. Check if you have a NIC (Network Interface Card) build-in to your motherboard and if not buy one they are really cheap. Grab a crossover cable (cat 5) to connect your xbox to your PC. Now go into windows xp and right click on My Network Places, click properties, right click on Local Area Connection, click properties. Click internet protocol (TCP/IP), click properties, click on use the following IP address. Type in 192.168.0.1 Click on Subnet Mask and enter 255.255.255.0 Click ok , Click ok, Click X to close the window. Now the computer is setup. Now download Flashfxp and install it. Click on "Site Manager" then click to create a new site. Name it Xbox and for the IP enter 192.168.0.3, verify the port is 21. The username and password are both "xbox", all lower-case and without the quotes. Now if you have installed a large hard drive then Evox dashboard will be setup so you can just boot Evox and then connect using Flashfxp. Boot Evox dashboard then choose System Management, System settings. Enter these settings.IP 192.168.0.3 Subnet Mask 255.255.255.0 DefaultGateway 192.168.0.1 You can't leave the Evox Menu while you are networked , if you play a game for example the link is broken. If you haven't installed a large hard drive then download my Spiderchip Reflash Cd (xbins) as it has Evox Dashboard and networking setup. Just boot the Spiderchip Reflash Cd and then connect using Flashfxp. C - System folder Used for storing the MicroSoft Dashboard files. Also other dashboards you install like Evolution x for example. D - DVD-ROM folder This shows the files on the DVD or CDRW in the DVD-ROM drive if there is one otherwise it will be blank. E - Game Save Folder This is where the save games are stored also any music you have ripped using the MicroSoft dashboard. F - Games & Apps Folder This is where you will put all your games and applications. This is only available if you have added a large hard drive. G - Games & Apps Folder This is where you will put more of your games and applications if you have this folder. This folder is for large hard drives over 137 gigabytes with a bios that supports F and G. The space before 137gig is on F and the rest is on G. Some bioses just put all the available space on F. X Y Z - Temp Folders - the xbox throws data in these cache folders and deletes it later on. Untill you understand more about the folders just don't touch anything except F or G if you have one as these are your folders. To copy files or folders simply right click on the file or folder and click on transfer. The right side of the screen is the xbox. The left side of the screen is your computer. To copy the C and E drives from the original xbox to your computer you would right click on C ( on xbox side ) and click on transfer. When it's finished right click on E ( on xbox side ) and click on transfer. Then after you have changed the hard drives and installed it with Slayer's Evox Auto Installer Cd you would right click on C ( on PC side ) and click on transfer. When it's finished right click on E ( on PC side ) and click on transfer.
  5. Xbox Error Codes 1 - bootldr - Unknown exactly, something to do with checking the motherboard 2 - bootldr - Eeprom check failed 3 - bootldr - ??/not used 4 - bootldr - Ram check failed 5 - kernel - HDD not locked (retail bioses require the hd to be locked) 6 - kernel - Cannot unlock HDD 7 - kernel - HDD timeout 8 - kernel - No HDD found 9 - kernel - HDD parameters (PIO/DMA/or size {debug}, certain size minimum is required for debug) 10 - kernel - DVD timeout 11 - kernel - No DVD Founnd 12 - kernel - DVD parameters (PIO/DMA) 13 - kernel - Dashboard launch fail (due to missing/bad key, or anything else that would prevent it from running) and the dashboard didn't specify why it failed. 14 - dashboard - Error loading dashboard (dashboard generic error) 15 - ?? - not used 16 - dashboard - Other files to do with dashboard / dashboard settings (specific dashboard error) 17 - ?? - not used 18 - ?? - not used 19 - ?? - not used 20 - kernel - The dashboard was attempted to load and failed; It was a cold boot, and the dashboard didn't specify why it failed, but it (for some reason) needed to be noted that the dvd passed the challenge/response authentication 21 - anywhere - This error says that the machine was booted to display a error, basically someone told the machine to reboot (or launch a xbe) with this flag, and the error code just means its been rebooted by the flag The Most common errors are dashboard related ones and simply reinstalling the MS dashboard will fix these. Use Slayer's Evox Auto Installer to repair your dashboard. After installing a new large hard drive if you get an error just ftp the original (C:) and (E:) folders from your computer's hard drive over to the xbox. Allways install hard drives as cable select for use in xbox's.
  6. Jargon Buster TSOP - IS THE ONBOARD CHIP THAT BOOTS THE MS BIOS , YOU WILL WANT TO BOOT FROM THIS FOR XBOX LIVE. LPC - THE HOLES WHERE THE MODCHIP CONNECT TO THE MOBO USING WIRES OR PINHEADER OR QUICKSOLDER METHODS. FRAG - FLASHES RED AND GREEN. THE XBOX IS TELLING YOU SOMETHING IS WRONG AND IT CANNOT BOOT POSSIBLY DUE TO POOR SOLDERING. BOOT - WHEN THE XBOX LOADS A BIOS AND STARTS UP THIS PROCESS IS CALLED BOOTING. BIOS - THE PROGRAM THAT IS STORED ON THE MODCHIP OR TSOP. IT'S EITHER MS OR HACKED (EVOX OR X2). PIN HEADER - 2 ROWS OF PINS THAT YOU SOLDER INTO THE LPC HOLES AND THEN SIMPLY PLUG YOUR CHIP ONTO IT. MOBO - SIMPLY MEANS THE XBOX MOTHERBOARD. D0 - THIS IS A LITTLE VIA ON THE TOP OF THE MOBO OR A SMALL PAD ON THE BOTTOMSIDE OF THE MOBO THAT WHEN GROUNDED PREVENTS THE TSOP BOOTING. VIA - A VERY SMALL LITTLE CIRCLE. YOU WILL NEED PRACTICE BEFORE YOU CAN SOLDER TO THESE. YOU CAN AVOID THESE ON EARLIER MODELS BUT NOT ON A V1.6 EVOX DASHBOARD - AN ALTERNATE DASHBOARD FOR THE XBOX THAT HAS A MENU TO LOAD GAMES , FLASH YOUR BIOS ETC. NOT TO BE CONFUSED WITH EVOX BIOS WHICH IS DIFFERENT AGAIN. EVOX DASHBOARD IS MADE UP OF A NUMBER OF FILES THAT YOU TRANSFER ONTO YOUR HARD DRIVE OR A CDRW. THE LATEST VERSION IS 3935. EVOX BIOS - A HACKED BIOS FOR THE XBOX , IT ALLOWS YOU TO PLAY BACKUP GAMES AND RUN COOL APPS LIKE EVOX DASHBOARD. THE LASTEST BIOS IS M8 PLUS. X2 BIOS - A HACKED BIOS FOR THE XBOX , IT ALLOWS YOU TO PLAY BACKUP GAMES AND RUN COOL APPS LIKE EVOX DASHBOARD. THE LASTEST BIOS IS 4983. HOT SWAP - THE NAME GIVEN TO THE TECHNIQUE OF BOOTING THE XBOX WITH ONE MODCHIP (WITH THE LID OFF AND THE DVDROM TURNED AROUND THE WRONG WAY) AND THEN UNPLUGGING THE MODCHIP FROM THE HEADERPIN AND REPLACING IT WITH A BLANK ONE OR ONE THAT HAS HAD A BAD FLASH AND THEN FLASHING THIS CHIP. FLASHING - PROGRAMMING A BLANK CHIP OR REPROGRAMMING A CHIP WITH A BIOS FILE. SPIDERCHIP AND ALADDINS NEED A 256K BIOS. DUOX2 NEED A 512K BIOS. ALSO V1.6 XBOX'S REQUIRE THE EVOX M8 PLUS V1.6 BIOS. OTHER MODELS CAN USE THE X2 4981 OR X2 4983 BIOS. FLASHBIOS - A SPECIAL BIOS THAT ONLY LETS YOU DO A FEW FUNCTIONS. (WONT PLAY BACKUP GAMES). ITS MAIN PURPOSE IS TO FLASH YOUR MODCHIP WITH A HACKED BIOS. LOCK - LOCKS A HARD DRIVE SO THE MICROSOFT BIOS AND DASHBOARD WILL BOOT. THIS IS NEEDED FOR XBOX LIVE. UNLOCK - UNLOCKS A HARD DRIVE FOR USE IN A PC. YOU MUST UNLOCK A XBOX HARD DRIVE BEFORE IT CAN BE USED IN A COMPUTER.
  7. Original Xbox Error Codes Error Codes.txt
  8. Requirements.Working Xbox with a Pinheader Install and a Working Modchip with a Hacked BiosHackDaBox Re-Flash DiscWith the working Xbox turned off Remove the lid , the screws from the hard drive bay and DVD-ROM drive. Remove the hard drive (still connected ), lift it up and over slightly, now lift the DVD-ROM drive up ( still connected) and spin it around to face the opposite way. So now the DVD-ROM is facing the wrong way round but still connected . Support the DVD with something underneath, so it sits level. Now put the hard drive bay back where it used to be ( covering up the power supply ).WARNING NEVER TOUCH THE POWER SUPPLY AREA AS IT CAN KILL YOU !This procedure is safe the way I have described above because you have access to the Modchip area . The chip should be plugged onto a pinheader ? If not you can not re-flash this way.Now remove the wire that goes to the D0 pad on the Modchip itself. Unscrew the screw near the LPC area and put the D0 wire under the screw and carefully tighten it up. You can solder the wire to the circle around the screw if you wish. remove any wire you have connecting the chip to the Xbox motherboard but leave the chip plugged into the pinheader.Now depending on your chip type you need to make the chip enabled all the time.On DuoX 2 solder a wire between the BT pad on the chip and pin 9 on the chip (This is point G on the official Duo diagram) see the picture below coutesy of cubistproject.On Aladdin solder a wire between BT pad on the chip and Pin 2 on the chipOn Spiderchip simply leave off the switch.Note : You need to do this to the good chip in the Xbox and the ones you intend to Flash.Turn on the Xbox with the good chip in and let it boot up and then load HackDaBox Re-flash Disc Choose Re-flash Spiderchip ( it works fine on DuoX 2 and Aladdin ). Choose the Xbox version you wish to use the flashed chip on. E.g. 1.0 - 1.5 or V. 1.6 but don't hit A to flash yet.Note Evoxdash or Slayers or your preffered Flash utility can be used with this method.Now carefully pull the Modchip off the pin header with the power still on ( note only 3.3 volts goes into the Modchip so it will not electrocute you.Now carefully line up the chip you are going to flash and then push it on the pinheader. Never try and force it on , double check it's lined up properly and it should slide onto the pinheader easily.Now go ahead and flash the chip now. The Xbox should turn off after the successful flash. Once it turns off ,turn it back on and the previously bad flashed chip should now boot the new flashed bios that you just put on it.If you picked Xbox V.1.6 and your Modchip is not in a V.1.6 it may not boot reliably so try it in the V.1.6 box.Remember to put all the original wires back to the chip, and remove any links you have made. In other words put the install back to the manufacturers recommendation.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.