Leaderboard

After much delay, I’ve finally got around to getting this beauty started. I’m a stickler for details and my OCD makes me do everything extremely slow lol. She has been fully dissembled, thoroughly cleaned, recapped and pasted, 128MB RAM, and HD+ ready. Taking frequent breaks to tackle weekend chores, but it’s happening and has been a fun time. I get way too much satisfaction taking these things apart and detailing them. @Bowlsnapper I should probably go ahead and get a startech adapter housing from you, but I’d rather wait for the clear version also. Guess I can hold off on that one part for now as it would be the easiest thing to swap out, being right on top. Should have a finished product tonight.

I somehow overlooked that I had a before photo of inside the RF shield. It's quite a difference.

Managed to figure it out earlier but thank you so much for the link! Used Yelo Neighborhood to throw Retail Game Loader on the drive and was able to boot Double Steel with no issues.

Oh wow! I definitely would not turn that option down. You’re gonna be the one to push me over the edge and start looking into a 3D printer.

Epic, this needs to be pinned on the first page of the forum. Its that good.

What you've done here, is basically what I want to do with a Halo Edition I have. 128MB, Nemesis Xenium Ice (I have like 3 massive bundles). Either with an HD+ or OpenXHD. REALLY nice job dude. Translucent smoke black PLA. What do you think, Marty ( @MadMartigan)? Should I pull the trigger?

Files here:

ENDGAME 8MB Cerbios Flasher & UX Dash Installer I am posting a mirror of the TSOP flasher utilizing the Endgame exploit. This means that no savegame exploit is necessary. Just a memcard or USB drive with a stock Xbox. Will also Install a basic version of UnleashX to get you started with something. Mega Link: https://mega.nz/file/lzcFBRqb#SdqDkbwJ5qQuD_Md6aXht6shgPiD1A_N27e4X7D8b9o --------------------------------------------------------------------- Use this as a starting point to maybe run the OGXbox installer that Sweet made! Very fully featured and handy! ------------------------------------------------------------------------------------------------------------------ Credit for this flasher/software goes to SweetDarkDestiny. I do NOT take credit for this. https://www.xbox-scene.info/forums/topic/437-endgame-8mb-cerbios-flasher-ux-dash-installer/#comment-833

Yes, I think I would like a clear one once you’ve perfected the craft.

I actually don't know if I'd call it "Nicer". I still have to work on making the supports less damaging in the slicer, and I have to research ways to do that. It still looks nice, but I actually think clear PLA will turn out better. This one is deformed, but only because it was not supported very well that time. I need help from somebody who knows how to customize supports. If I make the attachment points too small to avoid leaving markings, they will not stay attached and the model will just start cooking on the vat film... which means I only see failures happen the hard way and have to remove the BS cured resin from the vat film, which almost always scratches it no matter how careful I am. So failures (in this case, caused by making the supports small enough to break off without leaving noticeable marks... TOO small) are a big pain in the ass so I'm afraid to make the support points too damn small. This had minimal supports however, so If I use more, I may be able to make the breakoff points smaller and thus less noticeable and also have the model turn out much straighter and proper looking.

Hope this helps you:

If not already, check out the Steel Battalion Online subReddit: https://www.reddit.com/r/steelbattaliononline/ and Discord server for online multiplayer gaming: https://discord.gg/steelbattalion IIRC, they use XLink Kai to play with others on the Internet: https://www.teamxlink.co.uk/