Leaderboard

Took me 2 days to get all the wiring right. for the wii2hdmi for og xbox modd ... using a wii2hdmi device ordered off eBay you can also find an Alibaba and other places like this. Very inexpensive around 5 Canadian dollars. You're also going to need some sort of a donor Xbox RCA wires or component wires in order to pull this off. There is 11 connections total five of which are ground I do not suggest not adding all the ground cuz could cause interference. Had pretty good luck I made to both of them are crystal clear with no interference. I tested on version 1.0 as well as version 1.4 turned out very good. I tried to look up and down online for some sort of schematic nothing appeared. There was one picture that was in Spanish but it was misleading I tried to look into it to find out who the original inventor was found the person at XB Classics a Brazilian site. After conversating with him he told me that he had better pictures but he would not share. Then I noticed a site that they has linked where they were selling these to the equivalent of 40 US dollars a piece so that is the reason the images that they uploaded are just there to confuse people. So that they cannot make it. Does not include audio left or right. And apparently La stands for 5 V? Don't ask me but that's what the guy told me makes no sense at all. I spent two days getting the wiring correct. I documented everything and put it on a YouTube video (link2come) was trying to figure out the best way to make this readily available for everybody in the world any Xbox Enthusiast should have a low cost HDMI adapter solution available to them this is where these schematics come in. Again I didn't notice any interference at all. Just a little bit in the Bios when only running 480 but there's not much you can do unless you re Flash the BIOS to force. I've noticed people in the group posting pictures not even having soldering skills and getting very good results from this method. In theory you can use this exact same adapter in order to have an internal HDMI solution. These images are water marked because these are going to be the only good images that are online and I seen the way XB classic does their water mark and it really bugs me that they did that so I wanted to make sure that everyone knows where it came from. That being said I'm Mister James Reid really helped me out with this he volunteered his services in order to take my hard copy drawings that were on paper and make it look something presentable. Which he did and he did a great job thank you very much James I did in fact alter the images to have the watermark across them. Sorry about that but I figured since I put in the work I deserve to have my name on it. If you have any questions please do not hesitate I do not check this site every day but I do come in from time to time. Thanks again and I hope people online can use this receive money from the big corporations like pounds and hyperkin charging ridiculous amounts of money for something so cheap... I've also got a lot of questions recently about people asking if this is any better than component. It uses the component wires in order to transfer the signal into HDMI. I'm not too technical with that end but when looking up the chip number on the actual board for the Wii to HDMI adapter I did notice in there schematics and their breakdown for the actual board they did mention that the video board that does the decoding actually does video on hand splint what kind of video enhancement I have no idea. But it should be an enhancement over component if they are speaking the truth. Anyway gentleman without further delay here are the schematics. I hope this hope somebody somewhere. Thank you very much Frank

Hasn’t Xenia already accomplished this feat? I feel like I saw where it now has full compatibility

I have cut & paste my Cerbios.ini in text form below From your description it is already setup that way! I could not make DriveSetup = 1 work so I chose DriveSetup = 2 I still have IND_Bios on the second bank so if sh*t hit fan and couldn’t fttp & needed HEXEN as rescue ~ ; Cerbios Config ; Check for AV Pack AVCheck = true ; LED Ring Color, G = Green, R = Red, A = Amber, O = Off FrontLed = GGGG ; Fan Speed 0 = Default, 10-100 = Manual Control, Supports increments of 2's FanSpeed = 10 ; Drive Setup ; 0 = HDD & DVD, 1 = HDD & No DVD (Legacy Mode), 2 = HDD & No DVD (Modern Mode), 3 = Dual HDD DriveSetup = 2 ; Load XDK Launcher/XBDM if it exists (Debug) Debug = false ; IGR Master Port, 0 to 4, 0 = All Ports IGRMasterPort = 0 ; A = 0, B = 1, X = 2, Y = 3, BLACK = 4, WHITE = 5, LEFT_TRIGGER = 6, RIGHT_TRIGGER = 7 ; DPAD_UP = 8, DPAD_DOWN = 9, DPAD_LEFT = A, DPAD_RIGHT = B, START = C, BACK = D, LEFT_THUMB = E, RIGHT_THUMB = F ; IGR Dash Combo, Resets back to dashboard, If ISO is mounted then keep it mounted as IGRDash = 67CD ; IGR Game Combo, Resets the current loaded game IGRGame = 467C ; IGR Full Combo, Full system reset IGRFull = 467D ; IGS Shutdown Combo, Full system shutdown IGRShutdown = 678D ; CD paths (always falls back to \Device\CdRom0\default.xbe) CdPath1 = \Device\CdRom0\Evolutionx\evoxdash.xbe CdPath2 = \Device\CdRom0\Avalaunch\avalaunch.xbe CdPath3 = \Device\CdRom0\UnleashX\unleashx.xbe ; Dash paths (always falls back to \Device\Harddisk0\Partition2\xboxdash.xbe) DashPath1 = \Device\Harddisk0\Partition1\Applications\Xbmc\default.xbe DashPath2 = \Device\Harddisk0\Partition2\Applications\Xbmc\default.xbe DashPath3 = \Device\Harddisk0\Partition6\ORIGINS\XBMC\default.xbe ; Boot Animation path (always falls back to \Device\Harddisk0\Partition2\BootAnims\Xbox\bootanim.xbe) BootAnimPath = \Device\Harddisk0\Partition1\BootAnims\Xbox\BootAnim.xbe

If you boot to say IND bios and you have a 2.2tb or bigger HDD then your install DVD will not see the bigger drive. If you set the config file like this "DriveSetup = 1" it will not look at the DVD on boot but you and still load a DVD from the dashboard if you set it to "DriveSetup = 0" it will look at the DVD then boot from the HDD unless there is a DVD in the drive. ; Drive Setup ; 0 = HDD & DVD, 1 = HDD & No DVD (Legacy Mode), 2 = HDD & No DVD (Modern Mode), 3 = Dual HDD DriveSetup = 1 Once the HDD is setup correctly you don't need to use a install DVD and if there is a app you need you can FTP that to the Xbox. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.