Leaderboard

Set your multimeter to 20 VDC or if it is a auto ranging then DC volt/VDC Connect the black lead to ground of the Xbox power connector( black wires) or the metal shield. The red probe should give around the same readings as this. Don't worry if the top 2 pins read nothing The D0 should read 0 volt and should read around 3 to 5 volt for 1/2 a second when you 1st turn on the Xbox then read 0 volt that's if the D0 is connected to the D0 on the main board SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

Almost done. There are still LEDs to be installed.

Yes take care and get better soon. Don't worry about the installer, the most important thing is you have taken the action to prevent the issue happening until you feel better. All the best. AtariSoul

Please don't take this project seriously, I know you are very dedicated to it, but health is very important in this pandemic period so look after yourself and your loved ones and be safe. There are many alternatives for all of us for xbox needs, so we can all wait patiently. Wish you a quick recovery.