By adam hunter
hello my friends i have an xbox 1.0 and i want to install modchip for what is best one for it and also mine works with 100.125 ac and i want to change it to 200.245 ac because iam living in kuwait how i can change that and can i change hetsink fan and use thermal grizzly thermal paste
Got a v1.1 Xbox today that i wanted to TSOP flash, but it has some issues, before doing anything the console was tested.
The hard drive is making some loud whirring sound, but it manages to boot to dash, this will be replaced with a bigger drive.
The DVD ROM was locked solid, so after opening the console and the DVD ROM, and giving it a good clean, that is now working again.
But when i tested the DVD to see if it ejects, which it does, every eject press the console now appears to soft reboot, i mean it restarts but doesn't power cycle.
Anyways i soldered the points on the mobo, and continued to flash which was successful, but the problem still remains with the eject.
The console hadn't been opened before today, as far as i remember it didn't reboot on eject when i 1st turned it on to test and was trying to eject the tray.
Have tried an alternate power/eject board but no change, also the console boots with no DVD drive connected also with no change, so i am out of ideas.
Has anyone experienced this, or know of a fix ? any help is appreciated.
So glad I found this awesome forum for the OG. I installed an OpenXenium chip and now I don't know what to do. My goal is to swap the original HDD (which is EVOX softmodded) with a spare 1TB I have laying around. I tried adding the retail kernel to the launch menu but it isn't working. On the original HDD the xbox boots to a black screen, on the spare HDD the xbox boots to an error screen. What is my next step?
Board Life Status
Board startup date: April 23, 2017 12:45:48