Jump to content
Sign in to follow this  
Wouter A

Wanted, 480p Force Bios Files

Recommended Posts

Is there anyone who is in possesion of the force 480P files?

they where shared by mr. Nova at assemblergames.

I am in desperate need for these files for the hdmi mod, most larger tv's do not support 480I over HDMI.

 

thank you for sharing already, i will post a tutorial for adding a WII2HDMI inside an xbox soon, have 4 of them running already ;-).

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By bulkchart32
      if u have a v1.6 that is connected with a component cable(green,blue and red cables) then u probably know there are a few games that are scrambled if u try to play them in 480p and u have to set the xbox to 480i to unscramble the the picture. here is a simple workaround that i just discovered.
      1.power on your xbox and pull the power cord with the system on.(the step may not be needed but it sometimes it)
      2. plug your xbox in, hold a controller in one hand and hit the power button with the other, then click in the left and right sticks along with holding down the L and R buttons and hold all 4 buttons until u get to the xbox desktop(make certain the system doesn't have a game in it so it will boot to the desktop).
      3. if u did things correctly u should see the screen flicker and go into 480p mode as the desktop is coming up. hit the INFO button on your tv remote to make certain that the display is in 480p mode(and not 480i).
      4. make certain the 480p mode is set to YES in the system settings menu and then throw in a game and see if it works. i used fable(non-lost chapters version) and it worked perfectly.
       
    • By FerociousOG
      Unable to flash BIOS. Error reading bios file (see pic). To me it sounds like I have a bad DVD burn? Just wanted to confirm. I did burn at the slowest write speed. Will re-burn again.
      -v1.1 mobo
      -XeXEn 2018
      -Using Verbatium DVD+R media
      -Attempting to flash iND-BIOS.5004 (F and G) to use 2TB SATA HDD.

      Thanks in advance.
       
    • By Paw
      Hi guys i just found my old xbox in the basement and by the look of things it looks like its hardmoded with a Xecuter chip and there is even a 120gb drive installed and all is working without any issues. My main question is if anyone here could help me identify what kind of Xecuter chip this is, because my plan is that i would like to replace the 120gb drive with a 1tb but im getting a LBA48 warning when i try to partition the new disk and its asking me to ugrade the current bios with a new one that supports LBA48.
      Current INFO:
      Bios: Xecuter2 4976.02
      Kernel 1.00.5838.01
      Xbox v1.1
      What would be the best course of action, how should i approach the reflashing, what bios should i pick so that the new 1tb drive works as intended and ofcause what should i think about when i approach all this?
       
       
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.