Jump to content

Recommended Posts

Name: wouter

Location: netherlands

 

I am a gaming enthousiast. 

I have a rack made from an old bed for evening fun with friends. 

On that rack I have 8 22" televisions with 8 xboxes to play games on a lan connection.

I always try to get the best display quality possible,  currently all is component.  It is a lot of work to connect this. 

Currently making wii2hdmi connectors fit the all mighty xboxes,  with succes. 

Will post a tutorial! 

IMAG1077.jpg

IMAG1073.jpg

IMAG1074.jpg

Link to post
Share on other sites

Interesting, but if I'm not mistaken those HDMI converters would be exact quality as component with some additional input lag. Pre 1.6 Xboxes can also output RGB via VGA with modded bios, I don't know how it compares vs YPbPr in terms of visuals.

Link to post
Share on other sites

Above that,  the quality of the component cables you get now a days is crap at best. 

 

The only good component cables are the monster ones and the originals. 

Have broken more than a few 360 cables to make them. 

This is cost effective and you can use it on newer tv sets. 

Link to post
Share on other sites

Change it to 360 cavles,  it will change your world completely. 

The plastic from the connector is locked at the side,  if you prone 2 pieces of metal at both sides it will come of withou damage. 

After that you can build it up completely as a new cable,  you can't tell if it is opened from the outside.

  • Thanks 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By geohunk
      Hi guys,
       
       So I was given an Xbox 1.0 from a friend that is chipped and has a 120gb HDD. Unfotunately the chip does not have support for HDD larger than 120gb and I am unable to flash the chip's BIOS (evox says it is not flash writeable).
       I'm basically in a bind to find a guide on how to softmod this box and tsop it from a modchip because I don't know what type of chip it is and how to disable it. Pictures below: 
      Apologies for the very dusty MB, lol! As always any guidance will be highly appreciated.
       

    • By Cliff
      Hi all,
      I joined just over a year ago, and just realized I've never posted before.  Thanks to this site and a few others, I TSOP-flashed a v1.0 XBOX and upgraded to a 2TB hard drive.  Now I'm in the process of trying to streamline as many of my consoles as possible to use HDMI.
       
      Cheers,
      Cliff
    • By dee
      First of all, thank you dear community for the oportunity to be a part of something good!
      I have a strange problem, have xbox 1.4 with aladdin XS MODCHIP, an older modchip ,but nonetheless it is working,
      As i want to upgrade to larger HDD, i pot-ed thomson drive, because it was failing, i put the 80 gb hdd, but i get error 13 and/or 16, 
      the problem is that hexen or slayers cant read dvd from the first try,and always it can read from the second,third,etc.Also reads backups and reads hexen and slayers from retail HDD.
      Orange light is ok,evox sign is in the left-upper corner,it tries to read dvd hexen,but gets me to error 13 or 16 (this is only when i put blank HDD instead of the retail one)?
      DVD TRIES TO SPIN 2-3 TIMES, BUT NO BOOT TO HEXEN OR SLAYERS DISC,THEN ERRORS FOR MISSSING DASHBOARD
      Is there any solution to this?would appreciate very much,i could provide any information needed, THANKS IN ADVANCE

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.